MultiFlowTest

If your flow rate is well calibrated, your top and bottom layers should look great. The small circle must be also visble

This test will creates 11 parts with a specific Flow rates already associated with the part.

• Flow Test 110%
• Flow Test 108%
• Flow Test 106%
• Flow Test 104%
• Flow Test 102%
• Flow Test 100%
• Flow Test 98%
• Flow Test 96%
• Flow Test 94%
• Flow Test 92%
• Flow Test 90%

SCAD Flow Test Model

Printing Conditions

 - Nozzle Size : 0.4
 - Layer Height : 0.2
 - Initial Layer Height : 0.2
 - Line Width : 0.4
 - Wall Line Count : 3
 - Top/Bottom Thickness : 0.8 mm

Printing Time = 26mn

Instructions

Print the tests parts if you don't want to print every part you can remove the part with the flow rates you don't want. After the print is finished, check the quality of your top and bottom layers. Use the flow rate of best part for your print.

Use the automatic reorder function to arrange every parts on the build plate.