[Suggestion] GUI to see all filtered partition settings from one screen, like the pattern access terminal

[Lightshardz]

Describe the feature

I really need a way to be able to see all of my precise partition settings in one place, rather than taking each drive out and throwing it in a cell workbench, especially if they have up to 63 on a disk. Some specific QOL options I would like to see is:

• be able to see/highlight duplicates, so if you have 2 drives or more that have the same item.
• Be able to see the priority settings of the drives they are placed in
• Be able to highlight the drive their disk is installed in (similar to the Extended AE options for finding patterns)
  I am fine needing to take a disk out and putting it in the cell workbench to add/remove filters, but I have a very hard time in large AE2 systems remembering what I've created drives for.

Reasons why it should be considered

Quality of Life, especially for large AE2 installs with dozens to hundreds of disks. Looking at a disk from within the drive only shows the first few, with the highest Byte count. Removing the disk to put it in a cell workbench can create defrag issues with your network if you have automation set up and systems are actively putting items in your system, then you end up with precise filtered items, just a couple, sitting in other drives that are non-partitioned and taking up Type space. In the early stages, "defragmenting" your system by pulling out your "general" drives and running them through an I/O port is fine, but once your system is large enough that becomes quite a pain.

Additional details

No response