Add G-codes M86, M87

Author: thinkyhead

Marlin/src/gcode/gcode.cpp

@@ -659,8 +659,15 @@ void GcodeSuite::process_parsed_command(const bool no_ok/*=false*/) {
         case 82: M82(); break;                                    // M82: Set E axis normal mode (same as other axes)
         case 83: M83(); break;                                    // M83: Set E axis relative mode
       #endif
+
       case 18: case 84: M18_M84(); break;                         // M18/M84: Disable Steppers / Set Timeout
       case 85: M85(); break;                                      // M85: Set inactivity stepper shutdown timeout
+
+      #if ENABLED(HOTEND_IDLE_TIMEOUT)
+        case 86: M86(); break;                                    // M86: Set Hotend Idle Timeout
+        case 87: M87(); break;                                    // M87: Cancel Hotend Idle Timeout
+      #endif
+
       case 92: M92(); break;                                      // M92: Set the steps-per-unit for one or more axes
       case 114: M114(); break;                                    // M114: Report current position
       case 115: M115(); break;                                    // M115: Report capabilities

Marlin/src/gcode/gcode.h

@@ -711,6 +711,13 @@ class GcodeSuite {
   #endif
 
   static void M85();
+
+  #if ENABLED(HOTEND_IDLE_TIMEOUT)
+    static void M86();
+    static void M86_report(const bool forReplay=true);
+    static void M87();
+  #endif
+
   static void M92();
   static void M92_report(const bool forReplay=true, const int8_t e=-1);
 

Marlin/src/gcode/temp/M86-M87.cpp

@@ -0,0 +1,79 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2023 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+
+/**
+ * gcode/temp/M86-M87.cpp
+ *
+ * Hotend Idle Timeout
+ */
+
+#include "../../inc/MarlinConfigPre.h"
+
+#if ENABLED(HOTEND_IDLE_TIMEOUT)
+
+#include "../gcode.h"
+#include "../../feature/hotend_idle.h"
+
+void GcodeSuite::M86_report(const bool forReplay/*=true*/) {
+  hotend_idle_settings_t &c = hotend_idle.cfg;
+  report_heading(forReplay, F("Hotend Idle Timeout"));
+  SERIAL_ECHOLNPGM("  M86"
+    #if HAS_HEATED_BED
+      " B", c.bed_target,
+    #endif
+    " E", c.nozzle_target,
+    " S", c.timeout,
+    " T", c.trigger
+  );
+}
+
+/**
+ * M86: Set / Report Hotend Idle Timeout
+ *
+ * Parameters
+ *  S<seconds>  : Idle timeout. Set to 0 to disable.
+ *  E<temp>     : Extruder idle temperature to set on timeout
+ *  B<temp>     : Bed idle temperature to set on timeout
+ *  T<temp>     : Minimum extruder temperature to consider for timeout (> idle temperature)
+ */
+void GcodeSuite::M86() {
+  if (!parser.seen_any()) return M86_report();
+  hotend_idle_settings_t &c = hotend_idle.cfg;
+  if (parser.seenval('S')) c.timeout = parser.value_ushort();
+  if (parser.seenval('T')) c.trigger = parser.value_celsius();
+  if (parser.seenval('E')) c.nozzle_target = parser.value_celsius();
+  #if HAS_HEATED_BED
+    if (parser.seenval('B')) c.bed_target = parser.value_celsius();
+  #endif
+  const celsius_t min_trigger = c.nozzle_target + TEMP_HYSTERESIS;
+  if (c.trigger <= min_trigger)
+    SERIAL_ECHOLNPGM("?Idle Timeout (T) trigger temperature should be over ", min_trigger, "C.");
+}
+
+/**
+ * M86: Cancel Hotend Idle Timeout (by setting the timeout period to 0)
+ */
+void GcodeSuite::M87() {
+  hotend_idle.cfg.timeout = 0;
+}
+
+#endif // HOTEND_IDLE_TIMEOUT

Marlin/src/module/settings.cpp

@@ -631,7 +631,7 @@ typedef struct SettingsDataStruct {
   // HOTEND_IDLE_TIMEOUT
   //
   #if ENABLED(HOTEND_IDLE_TIMEOUT)
-    hotend_idle_settings_t hotend_idle_config;
+    hotend_idle_settings_t hotend_idle_config;          // M86 S T E B
   #endif
 
 } SettingsData;
@@ -3877,6 +3877,11 @@ void MarlinSettings::reset() {
     //
     TERN_(HAS_ZV_SHAPING, gcode.M593_report(forReplay));
 
+    //
+    // Hotend Idle Timeout
+    //
+    TERN_(HOTEND_IDLE_TIMEOUT, gcode.M86_report(forReplay));
+
     //
     // Linear Advance
     //

ini/features.ini

@@ -140,7 +140,7 @@ HAS_FANMUX                             = build_src_filter=+<src/feature/fanmux.c
 FILAMENT_WIDTH_SENSOR                  = build_src_filter=+<src/feature/filwidth.cpp> +<src/gcode/feature/filwidth>
 FWRETRACT                              = build_src_filter=+<src/feature/fwretract.cpp> +<src/gcode/feature/fwretract>
 HOST_ACTION_COMMANDS                   = build_src_filter=+<src/feature/host_actions.cpp>
-HOTEND_IDLE_TIMEOUT                    = build_src_filter=+<src/feature/hotend_idle.cpp>
+HOTEND_IDLE_TIMEOUT                    = build_src_filter=+<src/feature/hotend_idle.cpp> +<src/gcode/temp/M86-M87.cpp>
 JOYSTICK                               = build_src_filter=+<src/feature/joystick.cpp>
 BLINKM                                 = build_src_filter=+<src/feature/leds/blinkm.cpp>
 HAS_COLOR_LEDS                         = build_src_filter=+<src/feature/leds/leds.cpp> +<src/gcode/feature/leds/M150.cpp>