ili9320.h

#ifndef _ILI9320_H_
#define _ILI9320_H_

//#include "stm32f10x.h"
#include "sys.h"
#include "stm32f1xx.h"  //skyblue 2016-12-13
#ifdef __cplusplus
 extern "C" {
#endif

//定义驱动IC是ILI9320还是ILI9325
#define  ILI9325 //ILI9325

//屏幕旋转定义 数字按照 ID[1:0]AM 按照PDF中的配置定义
#define ID_AM  110

//硬件相关的子函数
//#define Lcd_Light_ON   GPIO_SetBits(GPIOG, GPIO_Pin_11);
//#define Lcd_Light_OFF  GPIO_ResetBits(GPIOG, GPIO_Pin_11);
#define Lcd_Light_ON    PDout(13)=1
#define Lcd_Light_OFF   PDout(13)=0

//#define Lcd_TE   PAin(15)

//#define Lcd_SET()         PDout(6)=1
//#define Lcd_RESET()       PDout(6)=0
#define Lcd_SET()         PCout(6)=1
#define Lcd_RESET()       PCout(6)=0
//skykblue add begin
#define RCC_AHB1Periph_GPIOA             ((uint32_t)0x00000001)
#define RCC_AHB1Periph_GPIOB             ((uint32_t)0x00000002)
#define RCC_AHB1Periph_GPIOC             ((uint32_t)0x00000004)
#define RCC_AHB1Periph_GPIOD             ((uint32_t)0x00000008)
#define RCC_AHB1Periph_GPIOE             ((uint32_t)0x00000010)
#define RCC_AHB1Periph_GPIOF             ((uint32_t)0x00000020)
#define RCC_AHB1Periph_GPIOG             ((uint32_t)0x00000040)
#define RCC_AHB1Periph_GPIOH             ((uint32_t)0x00000080)
#define RCC_AHB1Periph_GPIOI             ((uint32_t)0x00000100) 
#define RCC_AHB1Periph_GPIOJ             ((uint32_t)0x00000200)
#define RCC_AHB1Periph_GPIOK             ((uint32_t)0x00000400)
#define RCC_AHB3Periph_FSMC                ((uint32_t)0x00000001)

#define RCC_AHBPeriph_FSMC              ((uint32_t)0x00000100)

/********************************************add********/
#define RCC_APB2Periph_AFIO              ((uint32_t)0x00000001)
#define RCC_APB2Periph_GPIOB             ((uint32_t)0x00000008)

#define RCC_APB2Periph_GPIOC             ((uint32_t)0x00000010)
#define RCC_APB2Periph_GPIOD             ((uint32_t)0x00000020)
#define RCC_APB2Periph_GPIOE             ((uint32_t)0x00000040)
#define RCC_APB2Periph_GPIOF             ((uint32_t)0x00000080)
#define RCC_APB2Periph_GPIOG             ((uint32_t)0x00000100)
/********************************************end********/

#define GPIO_Pin_0                 ((uint16_t)0x0001)  /* Pin 0 selected */
#define GPIO_Pin_1                 ((uint16_t)0x0002)  /* Pin 1 selected */
#define GPIO_Pin_2                 ((uint16_t)0x0004)  /* Pin 2 selected */
#define GPIO_Pin_3                 ((uint16_t)0x0008)  /* Pin 3 selected */
#define GPIO_Pin_4                 ((uint16_t)0x0010)  /* Pin 4 selected */
#define GPIO_Pin_5                 ((uint16_t)0x0020)  /* Pin 5 selected */
#define GPIO_Pin_6                 ((uint16_t)0x0040)  /* Pin 6 selected */
#define GPIO_Pin_7                 ((uint16_t)0x0080)  /* Pin 7 selected */
#define GPIO_Pin_8                 ((uint16_t)0x0100)  /* Pin 8 selected */
#define GPIO_Pin_9                 ((uint16_t)0x0200)  /* Pin 9 selected */
#define GPIO_Pin_10                ((uint16_t)0x0400)  /* Pin 10 selected */
#define GPIO_Pin_11                ((uint16_t)0x0800)  /* Pin 11 selected */
#define GPIO_Pin_12                ((uint16_t)0x1000)  /* Pin 12 selected */
#define GPIO_Pin_13                ((uint16_t)0x2000)  /* Pin 13 selected */
#define GPIO_Pin_14                ((uint16_t)0x4000)  /* Pin 14 selected */
#define GPIO_Pin_15                ((uint16_t)0x8000)  /* Pin 15 selected */
#define GPIO_Pin_All               ((uint16_t)0xFFFF)  /* All pins selected */

#define GPIO_PinSource0            ((uint8_t)0x00)
#define GPIO_PinSource1            ((uint8_t)0x01)
#define GPIO_PinSource2            ((uint8_t)0x02)
#define GPIO_PinSource3            ((uint8_t)0x03)
#define GPIO_PinSource4            ((uint8_t)0x04)
#define GPIO_PinSource5            ((uint8_t)0x05)
#define GPIO_PinSource6            ((uint8_t)0x06)
#define GPIO_PinSource7            ((uint8_t)0x07)
#define GPIO_PinSource8            ((uint8_t)0x08)
#define GPIO_PinSource9            ((uint8_t)0x09)
#define GPIO_PinSource10           ((uint8_t)0x0A)
#define GPIO_PinSource11           ((uint8_t)0x0B)
#define GPIO_PinSource12           ((uint8_t)0x0C)
#define GPIO_PinSource13           ((uint8_t)0x0D)
#define GPIO_PinSource14           ((uint8_t)0x0E)
#define GPIO_PinSource15           ((uint8_t)0x0F)

#define GPIO_AF_FSMC             ((uint8_t)0xC)  
#if 0
#define  GPIO_Speed_2MHz    GPIO_Low_Speed    
#define  GPIO_Speed_25MHz   GPIO_Medium_Speed 
#define  GPIO_Speed_50MHz   GPIO_Fast_Speed 
#define  GPIO_Speed_100MHz  GPIO_High_Speed  

typedef enum
{ 
  GPIO_PuPd_NOPULL = 0x00,
  GPIO_PuPd_UP     = 0x01,
  GPIO_PuPd_DOWN   = 0x02
}GPIOPuPd_TypeDef;
typedef enum
{ 
  GPIO_OType_PP = 0x00,
  GPIO_OType_OD = 0x01
}GPIOOType_TypeDef;
typedef enum
{ 
  GPIO_Mode_IN   = 0x00, /*!< GPIO Input Mode */
  GPIO_Mode_OUT  = 0x01, /*!< GPIO Output Mode */
  GPIO_Mode_AF   = 0x02, /*!< GPIO Alternate function Mode */
  GPIO_Mode_AN   = 0x03,  /*!< GPIO Analog Mode */
  GPIO_Mode_IN_FLOATING = 0x04 , //**
  GPIO_Mode_Out_PP = 0x10,   //**
  GPIO_Mode_IPU = 0x48          //**
}GPIOMode_TypeDef;
typedef enum
{ 
  GPIO_Low_Speed     = 0x00, /*!< Low speed    */
  GPIO_Medium_Speed  = 0x01, /*!< Medium speed */
  GPIO_Fast_Speed    = 0x02, /*!< Fast speed   */
  GPIO_High_Speed    = 0x03  /*!< High speed   */
}GPIOSpeed_TypeDef;
typedef struct
{
  uint32_t GPIO_Pin;              /*!< Specifies the GPIO pins to be configured.
                                       This parameter can be any value of @ref GPIO_pins_define */

  GPIOMode_TypeDef GPIO_Mode;     /*!< Specifies the operating mode for the selected pins.
                                       This parameter can be a value of @ref GPIOMode_TypeDef */

  GPIOSpeed_TypeDef GPIO_Speed;   /*!< Specifies the speed for the selected pins.
                                       This parameter can be a value of @ref GPIOSpeed_TypeDef */

  GPIOOType_TypeDef GPIO_OType;   /*!< Specifies the operating output type for the selected pins.
                                       This parameter can be a value of @ref GPIOOType_TypeDef */

  GPIOPuPd_TypeDef GPIO_PuPd;     /*!< Specifies the operating Pull-up/Pull down for the selected pins.
                                       This parameter can be a value of @ref GPIOPuPd_TypeDef */
}GPIO_InitTypeDef_TFT;

//skyblue add end
 #endif  
/*
#define nCsPin  GPIO_Pin_8
#define RsPin   GPIO_Pin_9
#define nWrPin  GPIO_Pin_10
#define nRdPin  GPIO_Pin_11
#define nRstPin GPIO_Pin_12
#define Lcd_LightPin GPIO_Pin_13

#define Set_nWr (*((volatile unsigned long *) 0x40011010) = nWrPin)
#define Clr_nWr (*((volatile unsigned long *) 0x40011014) = nWrPin)

#define Set_Cs  (*((volatile unsigned long *) 0x40011010) = nCsPin)
#define Clr_Cs  (*((volatile unsigned long *) 0x40011014) = nCsPin)

#define Set_Rs  (*((volatile unsigned long *) 0x40011010) = RsPin)
#define Clr_Rs  (*((volatile unsigned long *) 0x40011014) = RsPin)

#define Set_nRd (*((volatile unsigned long *) 0x40011010) = nRdPin)
#define Clr_nRd (*((volatile unsigned long *) 0x40011014) = nRdPin)

#define Set_Rst (*((volatile unsigned long *) 0x40011010) = nRstPin)
#define Clr_Rst (*((volatile unsigned long *) 0x40011014) = nRstPin)

#define Lcd_Light_ON   (*((volatile unsigned long *) 0x40011010) = Lcd_LightPin)
#define Lcd_Light_OFF  (*((volatile unsigned long *) 0x40011014) = Lcd_LightPin)
*/
/* LCD Registers */
#ifndef     R0 

#define R0             0x00
#define R1             0x01
#define R2             0x02
#define R3             0x03
#define R4             0x04
#define R5             0x05
#define R6             0x06
#define R7             0x07
#define R8             0x08
#define R9             0x09
#define R10            0x0A
#define R12            0x0C
#define R13            0x0D
#define R14            0x0E
#define R15            0x0F
#define R16            0x10
#define R17            0x11
#define R18            0x12
#define R19            0x13
#define R20            0x14
#define R21            0x15
#define R22            0x16
#define R23            0x17
#define R24            0x18
#define R25            0x19
#define R26            0x1A
#define R27            0x1B
#define R28            0x1C
#define R29            0x1D
#define R30            0x1E
#define R31            0x1F
#define R32            0x20
#define R33            0x21
#define R34            0x22
#define R36            0x24
#define R37            0x25
#define R40            0x28
#define R41            0x29
#define R43            0x2B
#define R45            0x2D
#define R48            0x30
#define R49            0x31
#define R50            0x32
#define R51            0x33
#define R52            0x34
#define R53            0x35
#define R54            0x36
#define R55            0x37
#define R56            0x38
#define R57            0x39
#define R59            0x3B
#define R60            0x3C
#define R61            0x3D
#define R62            0x3E
#define R63            0x3F
#define R64            0x40
#define R65            0x41
#define R66            0x42
#define R67            0x43
#define R68            0x44
#define R69            0x45
#define R70            0x46
#define R71            0x47
#define R72            0x48
#define R73            0x49
#define R74            0x4A
#define R75            0x4B
#define R76            0x4C
#define R77            0x4D
#define R78            0x4E
#define R79            0x4F
#define R80            0x50
#define R81            0x51
#define R82            0x52
#define R83            0x53
#define R96            0x60
#define R97            0x61
#define R106           0x6A
#define R118           0x76
#define R128           0x80
#define R129           0x81
#define R130           0x82
#define R131           0x83
#define R132           0x84
#define R133           0x85
#define R134           0x86
#define R135           0x87
#define R136           0x88
#define R137           0x89
#define R139           0x8B
#define R140           0x8C
#define R141           0x8D
#define R143           0x8F
#define R144           0x90
#define R145           0x91
#define R146           0x92
#define R147           0x93
#define R148           0x94
#define R149           0x95
#define R150           0x96
#define R151           0x97
#define R152           0x98
#define R153           0x99
#define R154           0x9A
#define R157           0x9D
#define R192           0xC0
#define R193           0xC1
#define R229           0xE5
#endif

/* LCD Control pins */
#define CtrlPin_NCS    GPIO_Pin_2   /* PB.02 */
#define CtrlPin_RS     GPIO_Pin_7   /* PD.07 */
#define CtrlPin_NWR    GPIO_Pin_15  /* PD.15 */

/* LCD color */
#ifndef 	White
#define White          0xFFFF
#define Black          0x0000
#define Grey           0xF7DE
#define Blue           0x001F
#define Blue2          0x051F
#define Red            0xF800
#define Magenta        0xF81F
#define Green          0x07E0
#define Cyan           0x7FFF
#define Yellow         0xFFE0
#endif

#define HyalineBackColor 0x0001  // Lihao 透明背景

#ifndef Line0
#define Line0          0
#define Line1          24
#define Line2          48
#define Line3          72
#define Line4          96
#define Line5          120
#define Line6          144
#define Line7          168
#define Line8          192
#define Line9          216


#define Horizontal     0x00
#define Vertical       0x01
#endif
u16 Read_ID(void);      //**读取SSD1963ID 
u16 LCD_RD_DATA(void);  //**
void LCD_WindowMax (unsigned int xsta,unsigned int ysta,unsigned int xend,unsigned int yend);  //**
void LCD_Fill2(uint8_t xsta, uint16_t ysta, uint8_t xend, uint16_t yend, uint16_t colour);   //**
void LCD_DB_AS_InPut(void);
void LCD_DB_AS_OutPut(void);

void LCD_WriteRAM(u16 RGB_Code);
void LCD_WriteRAM_Prepare(void);
void LCD_setWindowArea(uint16_t StartX, uint16_t StartY, uint16_t Width, uint16_t Height);
void LCD_Initializtion(void);;;
void ili9320_SetCursor(u16 x,u16 y);
void ili9320_SetWindows(u16 StartX,u16 StartY,u16 EndX,u16 EndY);
void ili9320_DrawPicture(u16 StartX,u16 StartY,u16 EndX,u16 EndY,u16 *pic);
void ili9320_SetPoint(u16 x,u16 y,u16 point);
void ili9320_PutChar(u16 x,u16 y,u8 c,u16 charColor,u16 bkColor);  
void ili9320_Clear(u16 dat);
void ili9320_Delay(u32 nCount);
u16 ili9320_GetCode(void);;
void ili9320_PutChar_16x24(u16 x,u16 y,u8 c,u16 charColor,u16 bkColor);
void ili9320_BackLight(u8 status);

u16 ili9320_BGR2RGB(u16 c);

u16 ili9320_GetPoint(u16 x,u16 y);;
void ili9320_PutChar(u16 x,u16 y,u8 c,u16 charColor,u16 bkColor); 
u16 GUI_Color565(u32 RGB);  // RGB颜色转为16位(565)

void GUI_Text(u16 x, u16 y, u8 *str, u16 len,u16 Color, u16 bkColor);
void GUI_Line(u16 x0, u16 y0, u16 x1, u16 y1,u16 color);  // 画线
void GUI_Circle(u16 cx,u16 cy,u16 r,u16 color,u8 fill);  // 画园
void GUI_Rectangle(u16 x0, u16 y0, u16 x1, u16 y1,u16 color,u8 fill); // 画矩形
void GUI_Square(u16 x0, u16 y0, u16 with, u16 color,u8 fill);  // 画正方形


void Touch_Initializtion(void);
u16  Touch_GetPhyX(void);
u16  Touch_GetPhyY(void);
u16  Touch_MeasurementX(void);
u16  Touch_MeasurementY(void);

//void GPIO_Init_TFT(GPIO_TypeDef* GPIOx, GPIO_InitTypeDef_TFT* GPIO_InitStruct);   //**
void GPIO_Init_TFT(GPIO_TypeDef* GPIOx, GPIO_InitTypeDef* GPIO_InitStruct);
#ifdef __cplusplus
}
#endif

#endif