onclite: audio: Increase microphone & speaker & headphones volume

* Some users have reported that the speaker volume is low on calls and other times.
* Increase the volume of the microphone, speaker, headphone to get a good using experience.

Signed-off-by: Sensei-Developer <senseideveloper20gmail.com>

Author: Sensei-Developer

audio/mixer_paths_mtp.xml

@@ -51,23 +51,23 @@
     <ctl name="Voip Evrc Min Max Rate Config" id="1" value="4" />
     <ctl name="Voip Dtx Mode" value="0" />
     <ctl name="TTY Mode" value="OFF" />
-    <ctl name="HPHL Volume" value="9" />
-    <ctl name="HPHR Volume" value="9" />
+    <ctl name="HPHL Volume" value="20" />
+    <ctl name="HPHR Volume" value="20" />
     <ctl name="RX HPH Mode" value="NORMAL" />
     <ctl name="COMP0 RX1" value="0" />
     <ctl name="COMP0 RX2" value="0" />
-    <ctl name="RX1 Digital Volume" value="84" />
-    <ctl name="RX2 Digital Volume" value="84" />
-    <ctl name="RX3 Digital Volume" value="84" />
+    <ctl name="RX1 Digital Volume" value="95" />
+    <ctl name="RX2 Digital Volume" value="95" />
+    <ctl name="RX3 Digital Volume" value="95" />
     <ctl name="IIR1 INP1 Volume" value="53" />
     <ctl name="IIR1 INP2 Volume" value="53" />
     <ctl name="IIR1 INP3 Volume" value="53" />
     <ctl name="IIR1 INP4 Volume" value="53" />
-    <ctl name="ADC1 Volume" value="4" />
-    <ctl name="ADC2 Volume" value="4" />
-    <ctl name="ADC3 Volume" value="4" />
-    <ctl name="DEC1 Volume" value="84" />
-    <ctl name="DEC2 Volume" value="84" />
+    <ctl name="ADC1 Volume" value="8" />
+    <ctl name="ADC2 Volume" value="8" />
+    <ctl name="ADC3 Volume" value="8" />
+    <ctl name="DEC1 Volume" value="95" />
+    <ctl name="DEC2 Volume" value="95" />
     <ctl name="DEC2 MUX" value="ZERO" />
     <ctl name="DEC1 MUX" value="ZERO" />
     <ctl name="ADC2 MUX" value="ZERO" />
@@ -1327,7 +1327,7 @@
 
     <path name="wsa-speaker">
         <ctl name="RX3 MIX1 INP1" value="RX1" />
-        <ctl name="RX3 Digital Volume" value="84" />
+        <ctl name="RX3 Digital Volume" value="95" />
         <ctl name="LINE_OUT" value="Switch" />
         <ctl name="SpkrMono WSA_RDAC" value="Switch" />
    </path>