English UG

Welcome to the AdvancedRoadTools wiki!

1.Overview

This Mod can build more complex curve to help build a interchange quickly.

2.UI

You can find 4 new added button when you build road, that is Force Smooth mode. YRoadtool. 1RoundRoadTool .3RoundRoadTool(from left to right)

(1) YRoadTool

It is used to split one single road to two single roads, or split one dual road to 3 roads(one dual road and 2 single roads)

1. Select a node(tools will automatic determine this road is single or dual, this node must only contain 1 segment)
   

2. Select leftaddwidth and rightaddwidth, leftaddwidth + rightaddwidth + leftaddwidth is the totalwidth after the split
   

3. Select leftroadwidth(if node is single road) or middleroadwidth(if node is duanl road), adjust road gaps, tools will auto set correct node position for these roads.
   

4. Connect all the nodes and update these segments with correct road
   

EG: 32m dual road can split to 16 + 16 + 16m road, so left&right add width is 8 (you can change gap to 1)
EG: 16m single road can split to 8 + 12m road, so you can set left or right add width to 4m (you can change gap to 3)

(2) 3RoundTools

Use 3 round to build a complex curve.(EG:Turbine interchange and X interchange)

1. Select start node
   

2. Select a round center and round radius for the middle round.
   

3. Select end node
   

4. Tools will conside start node dir and end node dir to get a curve(start node round, middle node round, end node round)
   

(3) 1RoundTools

Use 1 round to build a complex curve(EG: Cloverleaf interchange)

1. Select start node
   

2. Select post start node(2and1 will get a direction)
   

3. Select end node and modify round radius
   

4. Tools will conside start node dir and end node dir to get a curve(post start node to end node round)
   

3.Hotkey

Can be modified in mod`s option

+/-

Add or minus radius(1 and 3 round tools) / Add or minus left addwidth/ Add or minus leftroadwidth(middleroadwidth)

Pageup/Pagedown

Add or minus height(1 and 3 round tools) / Add or minus right addwidth/ Add or minus roadlenght

H(key)

Store current curve for later build(1 and 3 round tools)

J(key)

build all stored curve.(1 and 3 round tools)

K(key)

clear all stored curve.(1 and 3 round tools)

4.Other

1.In the same mode, if you select the same start node and end node, you can modify previous stored curve.
2.In 3 round tools, you can modify height/round center/round radius when you select round center in the screen.
3.Tools will still detect your real cash amount even when you use unlimited money. If you want to build roads for free, you can click a option in mod`s option.
4.Force smooth mode, in this mode, height is auto determined from start node to end node(smooth and do not consider terrain)