messagebundle_en.properties

fxml.save.and.close=Save and close
fxml.save=Save
fxml.reset=Reset screen
fxml.setting.controls=Controls
fxml.setting.ledsconfig=LEDs config
fxml.setting.mode=Mode
fxml.setting.wifimqtt=Network
fxml.setting.misc=Misc
fxml.setting.devices=Devices

fxml.ledsconfigtab.group.by=LED Groups
fxml.ledsconfigtab.toprow=Top Row LEDs
fxml.ledsconfigtab.leftcol=Left Col LEDs
fxml.ledsconfigtab.rightcol=Right Col LEDs
fxml.ledsconfigtab.bottomleft=Bottom Left LEDs
fxml.ledsconfigtab.bottomright=Bottom Right LEDs
fxml.ledsconfigtab.bottomrow=Bottom Row LEDs
fxml.ledsconfigtab.firstled=First LED offset
fxml.ledsconfigtab.splitbottomrow=Bottom Gap
fxml.ledsconfigtab.testimage=Test image
fxml.ledsconfigtab.leftdisplay=Left display
fxml.ledsconfigtab.centerdisplay=Center display
fxml.ledsconfigtab.rightdisplay=Right display
fxml.ledsconfigtab.maindisplay=Main display
fxml.ledsconfigtab.orientation=Orientation
fxml.ledsconfigtab.grabberArea=Grab Area
fxml.ledsconfigtab.gapType=Margins

fxml.modetab.binddisplay=Bind to display
fxml.modetab.screenresolution=Screen resolution
fxml.modetab.firmtypel=Firmware type
fxml.modetab.scaling=Scaling
fxml.modetab.aspectratio=Aspect ratio
fxml.modetab.theme.language=Theme and Language
fxml.modetab.capturemethod=Capture method
fxml.modetab.numberofcputhreads=# of CPU threads
fxml.modetab.simdavx=CPU extensions (AVX)
fxml.modetab.baudrate=Baud rate
fxml.modetab.serialport=Serial port
fxml.modetab.outputdevice=Output device

fxml.mqtttab.wirelessstream=WiFi/Ethernet stream
fxml.mqtttab.enablemqtt=Enable MQTT
fxml.mqtttab.mqttserverhost=MQTT server host
fxml.mqtttab.mqttport=MQTT Port
fxml.mqtttab.mqttbasetopic=MQTT base topic
fxml.mqtttab.mqttusername=MQTT username
fxml.mqtttab.mqttpwd=MQTT password
fxml.mqtttab.mqttdiscoverytopic=MQTT discovery topic
fxml.mqtttab.mqttdiscovery=MQTT Auto Discovery
fxml.mqtttab.mqttadddevice=Glow Worm device has been added to your Smart system.
fxml.mqtttab.mqttremovedevice=Glow Worm device has been removed from your Smart system.

fxml.misctab.ledcontrol=LEDs control
fxml.misctab.choosecolor=Choose color
fxml.misctab.gamma=Gamma
fxml.misctab.whitetemp=Color temperature
fxml.misctab.runlogin=Run at login
fxml.misctab.eyecare=Eye care
fxml.misctab.brightness=Brightness
fxml.misctab.captureframerate=Capture framerate
fxml.misctab.profiles=Profiles

fxml.controltab.gw=for Glow Worm Luciferin
fxml.controltab.info.graph=Info Graphs
fxml.controltab.producer=Producer
fxml.controltab.consumer=Consumer

fxml.info.forgw=for Glow Worm Luciferin
fxml.info.producing=Firefly: 
fxml.info.consuming=Glow Worm: 
fxml.info.signal.strenght=WiFi signal strength (%)
fxml.info.signal.framerate=Framerate (FPS)

fxml.devicestab.software.version=Software version
fxml.devicestab.connected.devices=Connected devices
fxml.devicestab.power.saving=Power saving
fxml.devicestab.surround.lighting=Surround lighting
fxml.devicestab.multi.monitor=Multi monitor
fxml.devicestab.sync.check=Sync check
fxml.devicestab.check.updates=Check for updates
fxml.devicestab.single.device=Single device
fxml.devicestab.device.name=Device Name
fxml.devicestab.type=Type
fxml.devicestab.colormode=Color Mode
fxml.devicestab.colororder=Color Order

fxml.colorcorrection.red=Red
fxml.colorcorrection.yellow=Yellow
fxml.colorcorrection.green=Green
fxml.colorcorrection.cyan=Cyan
fxml.colorcorrection.blue=Blue
fxml.colorcorrection.magenta=Magenta
fxml.colorcorrection.saturation=Master
fxml.colorcorrection.latency.test=Latency test
fxml.dialog.ok=Ok
fxml.dialog.apply=Apply
fxml.colorcorrection.saturation.label=Saturation
fxml.colorcorrection.hue.label=Hue
fxml.colorcorrection.lightness.label=Lightness
fxml.colorcorrection.reset=Reset
fxml.dialog.cancel=Cancel

fxml.greycorrection=Grayscale

fxml.eyecare.ldr.interval=LDR reading interval
ldr.reading.continuous=Continuous
fxml.eyecare.ldr.turnoff=Turn off LEDs during readings
fxml.eyecare.ldr.current.value=Room brightness
fxml.eyecare.ldr.min.bright=Minimum LED brightness
fxml.eyecare.ldr.calibrate=Calibrate LDR
fxml.eyecare.brightness.limiter=Peak brightness limit

ldr.alert.enabled=LDR enabled
ldr.alert.title=Light Dependent Resistor
ldr.alert.cal.header=Calibration successful
ldr.alert.cal.content=Current brightness level of the room will be used as the maximum level from which to start adjusting the brightness of the LED strip.
ldr.alert.reset.header=Reset successful
ldr.alert.reset.content=LDR values has been reset.
ldr.alert.header.error=Error
ldr.alert.content.error=Microcontroller is not responding, please retry later. 
ldr.alert.continue=Are you sure you want to continue? 

log.spawning.robots=Spawning new robot for capture
log.serial.port=Serial Port in use: 

controller.turn.led.on=Turn ON
controller.turn.led.off=Turn OFF

tray.icon.start=Start
tray.icon.stop=Stop
tray.icon.settings=Settings
tray.icon.info=Info
tray.icon.check.update=Update
tray.icon.check.install=Install updates
tray.icon.default=Default
tray.icon.exit=Exit

enum.aspect.ratio.fullscreen=FullScreen
enum.aspect.ratio.letterbox=Letterbox
enum.aspect.ratio.pillarbox=Pillarbox

enum.orientation.clockwise=Clockwise
enum.orientation.anticlockwise=Anticlockwise
enum.direction.normal=Normal
enum.direction.inverse=Inverse

enum.led.offset.bottom.left=Bottom Left
enum.led.offset.bottom.center=Bottom Center
enum.led.offset.bottom.right=Bottom Right
enum.led.offset.upper.right=Upper Right
enum.led.offset.upper.left=Upper Left

enum.theme.classic=Classic theme
enum.theme.dark.cyan=Dark theme
enum.theme.dark.orange=Light gray theme
enum.theme.blue.dark=Dark blue theme
enum.theme.purple=Dark purple theme

enum.disabled=Disabled
enum.power.saving.2.minutes=2 minutes
enum.power.saving.5.minutes=5 minutes
enum.power.saving.10.minutes=10 minutes
enum.power.saving.15.minutes=15 minutes
enum.power.saving.20.minutes=20 minutes
enum.power.saving.25.minutes=25 minutes
enum.power.saving.30.minutes=30 minutes
enum.power.saving.35.minutes=35 minutes
enum.power.saving.40.minutes=40 minutes
enum.power.saving.45.minutes=45 minutes
enum.power.saving.50.minutes=50 minutes
enum.power.saving.55.minutes=55 minutes
enum.power.saving.60.minutes=60 minutes
enum.power.saving.120.minutes=120 minutes

enum.audio.1.channel=1 channel
enum.audio.2.channel=2 channels
enum.audio.3.channel=3 channels
enum.audio.4.channel=4 channels
enum.audio.5.channel=5 channels
enum.audio.6.channel=6 channels
enum.audio.7.channel=7 channels
enum.audio.8.channel=8 channels
enum.audio.9.channel=9 channels

enum.framerate.5.fps=5
enum.framerate.10.fps=10
enum.framerate.15.fps=15
enum.framerate.20.fps=20
enum.framerate.25.fps=25
enum.framerate.30.fps=30
enum.framerate.40.fps=40
enum.framerate.50.fps=50
enum.framerate.60.fps=60
enum.framerate.90.fps=90
enum.framerate.120.fps=120
enum.framerate.144.fps=144
enum.framerate.unlocked=UNLOCKED

enum.frame.insertion.no.smoothing=No smoothing
enum.frame.insertion.smoothing.lvl.1=Smoothing Lvl 1
enum.frame.insertion.smoothing.lvl.2=Smoothing Lvl 2
enum.frame.insertion.smoothing.lvl.3=Smoothing Lvl 3
enum.frame.insertion.smoothing.lvl.4=Smoothing Lvl 4
enum.frame.insertion.smoothing.lvl.5=Smoothing Lvl 5
enum.frame.insertion.smoothing.lvl.6=Smoothing Lvl 6

enum.effect.bias.light=Bias light
enum.effect.mm.vumeter=Music mode (VU Meter)
enum.effect.mm.dual.vumeter=Music mode (Stereo VU Meter)
enum.effect.mm.screencapture=Music mode (Screen capture)
enum.effect.mm.rainbow=Music mode (Rainbow music)
enum.effect.solid=Solid
enum.effect.fire=Fire
enum.effect.twinkle=Twinkle
enum.effect.bpm=Bpm
enum.effect.rainbox=Rainbow
enum.effect.chaserainbox=Chase rainbow
enum.effect.solidrainbow=Solid rainbow
enum.effect.slow.rainbow=Slow rainbow
enum.effect.random.colors=Random colors
enum.effect.rainbow.colors=Rainbow colors
enum.effect.meteor=Meteor
enum.effect.waterfall=Color waterfall
enum.effect.random.marquee=Random marquee
enum.effect.rainbow.marquee=Rainbow marquee
enum.effect.rain=Pulsing rainbow
enum.effect.christmas=Christmas

enum.color.mode.rgb=RGB
enum.color.mode.rgbw.accurate=RGBW
enum.color.mode.rgbw.brighter=RGBW Mixed (Brighter)
enum.color.mode.rgbw.rgb=RGBW (RGB only)
enum.color.mode.dotstar=DotStar
full.firm=Full firmware
light.firm=Light firmware
full.firm.short=Full firmware
light.firm.short=Light firmware

multimonitor.disabled=Disabled
multimonitor.dual=Dual display
multimonitor.triple=Triple display

autodetect.black.bars=Auto
context.menu.color=Choose color
context.menu.gamma=Gamma
context.menu.audio.device=Audio device
context.menu.audio.gain=Audio gain

min.firmware.not.match=[{}, ver={}] Connected device does not match the minimum firmware version requirement.
update.downloading=Downloading
update.expected.size=Expected size: 
download.progress.bar=Downloading : 
download.complete= download completed
no.output=Problem reading output from {}: {}
was.created=was created
cleaning.old.config=Cleaning old config
failed.to.clean.old.config=Failed to clean old config
firmware.upgrade.res=[{}] Firmware upgrade {}
error.reading.config=Error reading config file, writing a default one.
framerate.title=Framerate error
framerate.header=Firefly Luciferin is out of sync
framerate.context=Your computer is capturing the screen too fast and Glow Worm Luciferin firmware can't keep up.\nThis can cause synchronization issues, do you want to lower the framerate to {0} FPS?
baudrate.title=Warning
baudrate.header=Are you sure you want to change the baud rate?
baudrate.context=If you are experiencing flickering and your hardware connections are properly made, lowering the baud rate may reduce the flicker.\n\nIf you want to increase the maximum framerate, increasing the baud rate can help.\nIf you increase the baud rate and your microcontroller doesn't support that speed, you will not be able to change it again until you manually reflash the firmware.\n\nBy pressing OK you accept to change the baud rate and to reboot your microcontroller, please wait some moments until it reconnects.
initial.title=Firefly Luciferin
initial.header=What type of firmware do you want to use?
initial.context=Please choose the type of firmware you want to use.\n\nFull firmware requires a WiFi or Ethernet connection and gives you the full Luciferin experience such as remote control, satellite support, automatic updates and many other features. \nWith full firmware, the USB cable is optional. \n\nIf you prefer a basic experience without network support using just the USB cable you can choose the lightweight firmware.\n\n
gpio.ok.header=GPIO has been changed
gpio.ok.title=GPIO
gpio.ok.context=Please click OK to reboot your microcontroller\n\n
serial.port=Serial port
serial.port.title=Serial Port Error
serial.port.open.header=Can't open SERIAL PORT
serial.port.ambiguos=Serial port is ambiguous
serial.port.ambiguos.context=There is more than one device connected to your serial ports. Please go to "Settings", "Mode" and select the serial port you want to use.
mqtt.error.title=MQTT Connection Error
mqtt.error.context=Luciferin is unable to connect to the MQTT server, please correct your settings and retry.
cuda.error.title=Plugins error
cuda.error.header=GStreamer plugins not found.
cuda.error.context=Your system does not have all the required plugins to run NVIDIA CUDA.\nPlease check the project's WIKI to learn how to install all the required dependencies.
wayland.screen.rec.permission=Luciferin needs the permission to record your\n{0}
wayland.screen.rec.permission.context=A popup will ask you for the permission to record your screen,\nplease select the "{0}"\nand then click the "Share" button.
click.ok.download=\nClick Ok to download and install the new version.
click.ok.download.linux=\nClick Ok to download new version in your\n~/.config/FireflyLuciferin folder.\n
once.download.finished=Once the download is finished,\nplease go to that folder and install it manually.
new.version.available=New version available!
latest.version=Latest version
no.updates=No updates available
new.version.install=Please install updates
new.version.available.sandbox=Please use your software center to update it.
upgrade.success=Upgrade success
upgrade.error=Upgrade error
device.upgrade.success=firmware upgrade successful.\nScreen capture will begin as soon as the microcontroller reboot is complete.
device.upgrade.error=firmware upgrade was not successful.
device.upgrade.success.cdc=firmware upgrade successful.\nCOM port has changed, please select the new port in the settings.
device.program.success=Connected device has been programmed
device.program.success.header=All Firefly Luciferin settings were automatically transferred to the connected device.
new.firmware.available=New firmware available!
cant.upgrade.too.old=Can't upgrade Glow Worm Luciferin device
manual.upgrade=Your device is running an old firmware that doesn't support automatic updates, please update it manually.
devices.updated=These devices will be updated:\n
device.updated=This device will be updated:\n
device.updated.light=This device needs to be updated:\n
update.background=update process runs in background, you'll be notified when it's finished.
update.needed=click OK to open the Web Browser installer.\nUpgrade must be done manually.
update.needed.linux=click OK to download the new firmware inside the ~/.config/FireflyLuciferin folder\nUpgrade must be done manually.
capture.mode.changed=Capture mode changed to 
no.device.found=No devices found
main.screen=Main screen ({0})
left.screen=Left screen ({0})
right.screen=Right screen ({0})
center.screen=Center screen ({0})

exceptions.win32.exception=Win32 Exception.
exceptions.select.obj=SelectObject Exception.
exceptions.delete.obj=DeleteObject Exception.
exceptions.delete.dc=Delete DC Exception.
exceptions.device.context.release=GlowWormDevice context did not release properly.
exceptions.windows=Window width and/or height were 0 even though GetWindowRect did not appear to fail.
exceptions.cant.find.gsreamer=Can't find GStreamer
exceptions.something.went.wrong=Something went wrong.

enum.default.audio.output=Default audio output
enum.default.audio.output.wasapi=Default audio output (WASAPI)
enum.default.audio.output.native=Default audio output (Native)

tc.before.text=RGB before correction ({0}, {1}, {2})
tc.after.text=RGB after correction ({0}, {1}, {2})
tc.after.text.rgwb=RGBW after correction ({0}, {1}, {2}, {3})
tc.full.saturation=Full saturation
tc.half.saturation=Half saturation
enum.color.algo.avg=Average color
enum.color.algo.avg.all=Average on all LEDs
enum.satellite.zone.entire.screen=Entire screen
enum.satellite.zone.top=Top
enum.satellite.zone.top.right=Top right
enum.satellite.zone.right=Right
enum.satellite.zone.bottom.right=Bottom right
enum.satellite.zone.bottom=Bottom
enum.satellite.zone.bottom.left=Bottom left
enum.satellite.zone.left=Left
enum.satellite.zone.top.left=Top left
enum.simd.auto=Auto
enum.simd.avx512=AVX 512
enum.simd.avx256=AVX 256
enum.simd.avx=AVX
enum.simd.disabled=Disabled

fxml.satellite.deviceip=IP
fxml.satellite.lednum=Led #
fxml.satellite.algo=Algorithm
fxml.satellite.zone=Zone
fxml.satellite.orientation=Direction
fxml.satellite.manage.sat=Manage satellites
fxml.satellite.manager.sat.ip=Satellite IP
fxml.satellite.manager.zone=Zones (Start/End)
fxml.satellite.manager.orient=Direction / Led #
fxml.satellite.manager.algo=Capture algorithm
satellite.ip.error.title=Satellite
satellite.ip.error.header=Can't add the satellite
satellite.ip.error.content=Please enter a valid IP address

tooltip.reset.wayland=Reset screen recording permission
tooltip.topled=# of LEDs in the top row
tooltip.leftled=# of LEDs in the left column
tooltip.rightled=# of LEDs in the right column
tooltip.bottomleftled=# of LEDs in bottom left row
tooltip.bottomrightled=# of LEDs in the bottom right row
tooltip.bottomrowled=# of LEDs in the bottom row
tooltip.orientation=Orientation of your LED strip
tooltip.screenwidth=Monitor resolution
tooltip.screenheight=Monitor resolution
tooltip.ledstartoffset=First LED offset
tooltip.scaling=OS scaling feature, you should not change this setting
tooltip.white.temp=The marker in the center disables white balance.
tooltip.color.mode=Use RGB for WS2812B or similar and RGBW for SK6812B or similar.
tooltip.gamma=Smaller values results in brighter LEDs but less accurate colors. 2.2 is generally good for SDR contents, 6.0 is generally good for HDR contents.
tooltip.capturemethod=If you have a GPU, Desktop Duplication API (DDUPL) is faster than other methods
tooltip.linuxcapturemethod=If you use Wayland you must use the PIPEWIRE acquisition method.
tooltip.maccapturemethod=Capture method
tooltip.numberofthreads=1 thread is enough when using DDUPL, 3 or more threads are recommended for other capture methods
tooltip.simd=Auto: Detects CPU capabilities and uses the best ones available\n
tooltip.serialport=Output device to use for this display. If you are behind a VLAN/Subnet or prefer to use a static IP address, enter the IP address of your Glow Worm device.
tooltip.aspectratio=Select letterbox if your video content presents horizontal black bars or pillarbox if you see vertical black bars
tooltip.language=Choose language
tooltip.framerate=30 FPS is the recommended framerate. This setting is specific to the bias light function.
tooltip.mqtthost=OPTIONAL: MQTT protocol://host
tooltip.power.saving=Turn off the LEDs if there is no activity for the configured number of minutes. If active, turn off the LEDs when closing Firefly Luciferin or turning off your computer.
tooltip.sat.btn=Add or remove satellites for surround lighting, requires full firmware.
tooltip.multimonitor=One microcontroller per monitor is required
tooltip.monitornumber=Choose a monitor for the screen capture
tooltip.mqttport=OPTIONAL: MQTT port
tooltip.mqtttopic=OPTIONAL: MQTT topic, change it if you want to run Luciferin on more than one computer over MQTT.
tooltip.mqttdiscoverytopic=OPTIONAL: Glow Worm device will be automatically added to Smart systems like Home Assistant.
tooltip.mqttdiscoverytopic.add=OPTIONAL: Glow Worm device will be automatically added to Smart systems like Home Assistant.
tooltip.mqttdiscoverytopic.remove=Remove Glow Worm entities from your Smart system.
tooltip.mqttuser=OPTIONAL: MQTT username
tooltip.mqttpwd=OPTIONAL: MQTT password
tooltip.mqttenable=Enable MQTT. Requires FULL firmware. If you enable MQTT, please be sure that MQTT is enabled on Glow Worm Firmware.
tooltip.wifienable=FULL firmware requires WiFi/Ethernet.
tooltip.eye.care=If enabled LEDs will never turn off in black scenes, a soft and gentle light is used instead.
tooltip.mqttstream=This method does not require a USB cable. Disable it if you want to use USB to drive the LEDs.
tooltip.streamtype=UDP is the fastest one
tooltip.start.with.system=Launch Firefly Luciferin when system starts
tooltip.check.updates=Set and forget it to update Firefly Luciferin and Glow Worm Luciferin when updates are available. Automatic firmware upgrade is available on FULL version only
tooltip.playbutton.null=Please configure and save before capturing
tooltip.sync.check=Check if Firefly Luciferin is in sync with the Glow Worm Luciferin firmware
tooltip.brightness=Set the brightness of the LED strip
tooltip.split.bottom.row=Split/Merge bottom LEDs row
tooltip.saveledbutton.null=You can change this options later
tooltip.savemqttbutton.null=You can change this options later
tooltip.savesettingsbutton.null=You can change this options later
tooltip.savedevicebutton.null=You can change this options later
tooltip.playbutton=START/STOP capturing
tooltip.saveledbutton=Changes to settings requires restarting the application
tooltip.savemqttbutton=Changes to settings requires restarting the application
tooltip.savesettingsbutton=Changes to settings requires restarting the application
tooltip.savedevicebutton=Changes to settings requires restarting the application
tooltip.showtestimagebutton=Show a test image, first and last LEDs are shown in orange. Unsaved settings will not be displayed here.
tooltip.baud.rate=Change it wisely
tooltip.theme=Change theme
tooltip.audio.channels=Numbers of supported audio channels
tooltip.audio.gain=Audio gain
tooltip.audio.device=Audio device to capture
tooltip.effect=Ambient light effect, music mode, colors
tooltip.colors=Color to use when using the Solid effect
tooltip.night.mode.from=Night mode will be enabled at this time
tooltip.night.mode.to=Night mode will end at this time
tooltip.night.mode.bright=Reduce brightness when in night mode, 0% disables night mode
tooltip.grabber.area.top.bottom=Top and bottom grab area width
tooltip.grabber.area.side=Side grab area width
tooltip.corner.gap=Interval between corners
tooltip.corner.group.by=Group the LEDs together
tooltip.profiles=Add and remove profiles for fast switching between modes via tray icon
tooltip.profiles.add=Save profile
tooltip.profiles.remove=Remove profile
tooltip.profiles.apply=Apply profile
tooltip.color.correction.red=Adjust red saturation
tooltip.color.correction.yellow=Adjust yellow saturation
tooltip.color.correction.green=Adjust green saturation
tooltip.color.correction.cyan=Adjust cyan saturation
tooltip.color.correction.blue=Adjust blue saturation
tooltip.color.correction.magenta=Adjust magenta saturation
tooltip.color.correction.saturation=Adjust saturation for all colors
tooltip.color.correction.lightness.red=Adjust red lightness
tooltip.color.correction.lightness.yellow=Adjust yellow lightness
tooltip.color.correction.lightness.green=Adjust green lightness
tooltip.color.correction.lightness.cyan=Adjust cyan lightness
tooltip.color.correction.lightness.blue=Adjust blue lightness
tooltip.color.correction.lightness.magenta=Adjust magenta lightness
tooltip.color.correction.lightness.saturation=Adjust lightness for all colors
tooltip.color.correction.hue.red=Adjust red hue
tooltip.color.correction.hue.yellow=Adjust yellow hue
tooltip.color.correction.hue.green=Adjust green hue
tooltip.color.correction.hue.cyan=Adjust cyan hue
tooltip.color.correction.hue.blue=Adjust blue hue
tooltip.color.correction.hue.magenta=Adjust magenta hue
tooltip.color.correction.hue.monitor.slider=Adjust the hue of the selected channel. This affects test image only and not on the calibration of the RGB strip
tooltip.color.correction.half.saturation=Adjust the saturation of the test image, it does not affect the calibration of the RGB strip
tooltip.color.correction.grey.correction=Greyscale calibration helps in making grey tones brighter or darker. This can cause flickering. 
tooltip.ldr.enableldr=Please be sure to have a LDR attached to your PCB once enabling this setting
tooltip.ldr.turnoff=Turn off LEDs between readings, this is useful if you have the LDR near the LEDs
tooltip.ldr.interval=How often the LDR reads the values
tooltip.ldr.minbright=Use a minimum brightness level when the room is very dark
tooltip.ldr.calibrateldr=Current brightness level of the room will be used as the maximum level from which to start adjusting the brightness of the LED strip. Calibration takes up to 5 seconds. 
tooltip.ldr.resetldr=Reset LDR calibration
tooltip.ldr.ldrlabel=Current brightness level in the room
tooltip.brightness.limiter=Limit peak brightness without affecting lower brightness scenes. 
tooltip.frame.insertion=Higher levels will smooth transitions from one color to another but LEDs will be less responsive to quick changes.
tooltip.colorcorrection.latency.test=This test displays colors in rapid succession and helps you check if the latency between the image shown on your monitor and the color displayed on the led strip is acceptable to you.
tooltip.colorcorrection.latency.test.speed=You can run the latency test at 10 different speed
tooltip.sat.manager.ip=Please choose which satellite to add from the list or enter its IP address
tooltip.sat.manager.zone=Screen capture zone to send to the satellite
tooltip.sat.manager.orientation=LED direction
tooltip.sat.manager.num.led=Led #
tooltip.sat.manager.algo=Capture algorithm
tooltip.sat.manager.add=Press this button to add a satellite