PT100 & Hemera setup

Author: petrzmax

Marlin/Configuration.h

@@ -406,7 +406,7 @@
  *   998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
  *   999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
  */
-#define TEMP_SENSOR_0 1
+#define TEMP_SENSOR_0 147 // I'm using PT100. Set 1 for stock thermistor
 #define TEMP_SENSOR_1 0
 #define TEMP_SENSOR_2 0
 #define TEMP_SENSOR_3 0
@@ -735,7 +735,7 @@
  * Override with M92
  *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
-#define DEFAULT_AXIS_STEPS_PER_UNIT   { 80.3, 80.3, 1600, 402 } // XYZ - from stock firmware, E - Calibrated
+#define DEFAULT_AXIS_STEPS_PER_UNIT   { 80.3, 80.3, 1600, 409 } // XYZ - from stock firmware, E - Calibrated stock extruder - 402 (I'm using Hemera so now it's 409)
 
 /**
  * Default Max Feed Rate (mm/s)