Skip to content
New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

Sign up for GitHub

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

Jump to bottom

Part cooling fan support #8

Open
KenyeresTalpas opened this issue Sep 2, 2022 · 0 comments
Open

Part cooling fan support #8

KenyeresTalpas opened this issue Sep 2, 2022 · 0 comments

Comments

@KenyeresTalpas
Copy link

KenyeresTalpas commented Sep 2, 2022 •
edited
Loading

I redesigned the hotend and fan holder.
I Simply turned the heatsink with the stock 3010 fan 180°. In the front I made a 5015 fan connector with a separate dact.
The stock fan has temperature controll so it turns on after 50C°. I plugged the part cooling there and the board cooling and heatsink cooling goes to the same plug. I tried everything with the firmware... changed the controllable fan name from AFAN_PIN to FAN_PIN but it is blowing and spinning continuously the M106/M107 gcode not working how it should.

IMG_20220901_230637.jpg
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
Assignees
No one assigned
Labels
None yet
Projects
None yet
Milestone
No milestone
Development

No branches or pull requests
1 participant
@KenyeresTalpas