merge #1

honjow · 2023-10-16T10:38:49Z

No description provided.

The synchronize_irq(c->irq) will not return until the IRQ handler mtk_uart_apdma_irq_handler() is completed. If the synchronize_irq() holds a spin_lock and waits the IRQ handler to complete, but the IRQ handler also needs the same spin_lock. The deadlock will happen. The process is shown below: cpu0 cpu1 mtk_uart_apdma_device_pause() | mtk_uart_apdma_irq_handler() spin_lock_irqsave() | | spin_lock_irqsave() //hold the lock to wait | synchronize_irq() | This patch reorders the synchronize_irq(c->irq) outside the spin_lock in order to mitigate the bug. Fixes: 9135408 ("dmaengine: mediatek: Add MediaTek UART APDMA support") Signed-off-by: Duoming Zhou <duoming@zju.edu.cn> Reviewed-by: Eugen Hristev <eugen.hristev@collabora.com> Link: https://lore.kernel.org/r/20230806032511.45263-1-duoming@zju.edu.cn Signed-off-by: Vinod Koul <vkoul@kernel.org>

In the initial boot stage the integrated keyboard of Fujitsu Lifebook E5411 refuses to work and it's not possible to type for example a dm-crypt passphrase without the help of an external keyboard. i8042.nomux kernel parameter resolves this issue but using that a PS/2 mouse is detected. This input device is unused even when the i2c-hid-acpi kernel module is blacklisted making the integrated ELAN touchpad (04F3:308A) not working at all. Since the integrated touchpad is managed by the i2c_designware input driver in the Linux kernel and you can't find a PS/2 mouse port on the computer I think it's safe to not use the PS/2 mouse port at all. Signed-off-by: Szilard Fabian <szfabian@bluemarch.art> Link: https://lore.kernel.org/r/20231004011749.101789-1-szfabian@bluemarch.art Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

…io_int_idx == 0 case Add a special case for gpio_count == 1 && gpio_int_idx == 0 to goodix_add_acpi_gpio_mappings(). It seems that on newer x86/ACPI devices the reset and irq GPIOs are no longer listed as GPIO resources instead there is only 1 GpioInt resource and _PS0 does the whole reset sequence for us. This means that we must call acpi_device_fix_up_power() on these devices to ensure that the chip is reset before we try to use it. This part was already fixed in commit 3de93e6 ("Input: goodix - call acpi_device_fix_up_power() in some cases") by adding a call to acpi_device_fix_up_power() to the generic "Unexpected ACPI resources" catch all. But it turns out that this case on some hw needs some more special handling. Specifically the firmware may bootup with the IRQ pin in output mode. The reset sequence from ACPI _PS0 (executed by acpi_device_fix_up_power()) should put the pin in input mode, but the GPIO subsystem has cached the direction at bootup, causing request_irq() to fail due to gpiochip_lock_as_irq() failure: [ 9.119864] Goodix-TS i2c-GDIX1002:00: Unexpected ACPI resources: gpio_count 1, gpio_int_idx 0 [ 9.317443] Goodix-TS i2c-GDIX1002:00: ID 911, version: 1060 [ 9.321902] input: Goodix Capacitive TouchScreen as /devices/pci0000:00/0000:00:17.0/i2c_designware.4/i2c-5/i2c-GDIX1002:00/input/input8 [ 9.327840] gpio gpiochip0: (INT3453:00): gpiochip_lock_as_irq: tried to flag a GPIO set as output for IRQ [ 9.327856] gpio gpiochip0: (INT3453:00): unable to lock HW IRQ 26 for IRQ [ 9.327861] genirq: Failed to request resources for GDIX1002:00 (irq 131) on irqchip intel-gpio [ 9.327912] Goodix-TS i2c-GDIX1002:00: request IRQ failed: -5 Fix this by adding a special case for gpio_count == 1 && gpio_int_idx == 0 which adds an ACPI GPIO lookup table for the int GPIO even though we cannot use it for reset purposes (as there is no reset GPIO). Adding the lookup will make the gpiod_int = gpiod_get(..., GPIOD_IN) call succeed, which will explicitly set the direction to input fixing the issue. Note this re-uses the acpi_goodix_int_first_gpios[] lookup table, since there is only 1 GPIO in the ACPI resources the reset entry in that lookup table will amount to a no-op. Reported-and-tested-by: Michael Smith <1973.mjsmith@gmail.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20231003215144.69527-1-hdegoede@redhat.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Currently, for UNBOUND wq, if the apply_wqattrs_prepare() return error, the apply_wqattr_cleanup() will be called and use the pwq_release_worker kthread to release resources asynchronously. however, the kfree(wq) is invoked directly in failure path of alloc_workqueue(), if the kfree(wq) has been executed and when the pwq_release_workfn() accesses wq, this leads to the following scenario: BUG: KASAN: slab-use-after-free in pwq_release_workfn+0x339/0x380 kernel/workqueue.c:4124 Read of size 4 at addr ffff888027b831c0 by task pool_workqueue_/3 CPU: 0 PID: 3 Comm: pool_workqueue_ Not tainted 6.5.0-rc7-next-20230825-syzkaller #0 Hardware name: Google Compute Engine/Google Compute Engine, BIOS Google 07/26/2023 Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0xd9/0x1b0 lib/dump_stack.c:106 print_address_description mm/kasan/report.c:364 [inline] print_report+0xc4/0x620 mm/kasan/report.c:475 kasan_report+0xda/0x110 mm/kasan/report.c:588 pwq_release_workfn+0x339/0x380 kernel/workqueue.c:4124 kthread_worker_fn+0x2fc/0xa80 kernel/kthread.c:823 kthread+0x33a/0x430 kernel/kthread.c:388 ret_from_fork+0x45/0x80 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x11/0x20 arch/x86/entry/entry_64.S:304 </TASK> Allocated by task 5054: kasan_save_stack+0x33/0x50 mm/kasan/common.c:45 kasan_set_track+0x25/0x30 mm/kasan/common.c:52 ____kasan_kmalloc mm/kasan/common.c:374 [inline] __kasan_kmalloc+0xa2/0xb0 mm/kasan/common.c:383 kmalloc include/linux/slab.h:599 [inline] kzalloc include/linux/slab.h:720 [inline] alloc_workqueue+0x16f/0x1490 kernel/workqueue.c:4684 kvm_mmu_init_tdp_mmu+0x23/0x100 arch/x86/kvm/mmu/tdp_mmu.c:19 kvm_mmu_init_vm+0x248/0x2e0 arch/x86/kvm/mmu/mmu.c:6180 kvm_arch_init_vm+0x39/0x720 arch/x86/kvm/x86.c:12311 kvm_create_vm arch/x86/kvm/../../../virt/kvm/kvm_main.c:1222 [inline] kvm_dev_ioctl_create_vm arch/x86/kvm/../../../virt/kvm/kvm_main.c:5089 [inline] kvm_dev_ioctl+0xa31/0x1c20 arch/x86/kvm/../../../virt/kvm/kvm_main.c:5131 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:871 [inline] __se_sys_ioctl fs/ioctl.c:857 [inline] __x64_sys_ioctl+0x18f/0x210 fs/ioctl.c:857 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x38/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd Freed by task 5054: kasan_save_stack+0x33/0x50 mm/kasan/common.c:45 kasan_set_track+0x25/0x30 mm/kasan/common.c:52 kasan_save_free_info+0x2b/0x40 mm/kasan/generic.c:522 ____kasan_slab_free mm/kasan/common.c:236 [inline] ____kasan_slab_free+0x15b/0x1b0 mm/kasan/common.c:200 kasan_slab_free include/linux/kasan.h:164 [inline] slab_free_hook mm/slub.c:1800 [inline] slab_free_freelist_hook+0x114/0x1e0 mm/slub.c:1826 slab_free mm/slub.c:3809 [inline] __kmem_cache_free+0xb8/0x2f0 mm/slub.c:3822 alloc_workqueue+0xe76/0x1490 kernel/workqueue.c:4746 kvm_mmu_init_tdp_mmu+0x23/0x100 arch/x86/kvm/mmu/tdp_mmu.c:19 kvm_mmu_init_vm+0x248/0x2e0 arch/x86/kvm/mmu/mmu.c:6180 kvm_arch_init_vm+0x39/0x720 arch/x86/kvm/x86.c:12311 kvm_create_vm arch/x86/kvm/../../../virt/kvm/kvm_main.c:1222 [inline] kvm_dev_ioctl_create_vm arch/x86/kvm/../../../virt/kvm/kvm_main.c:5089 [inline] kvm_dev_ioctl+0xa31/0x1c20 arch/x86/kvm/../../../virt/kvm/kvm_main.c:5131 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:871 [inline] __se_sys_ioctl fs/ioctl.c:857 [inline] __x64_sys_ioctl+0x18f/0x210 fs/ioctl.c:857 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x38/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd This commit therefore flush pwq_release_worker in the alloc_and_link_pwqs() before invoke kfree(wq). Reported-by: syzbot+60db9f652c92d5bacba4@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=60db9f652c92d5bacba4 Signed-off-by: Zqiang <qiang.zhang1211@gmail.com> Signed-off-by: Tejun Heo <tj@kernel.org>

Per "dt-bindings/firmware/imx/rsrc.h", `IMX_SC_R_DMA_2_CH0 + 5` not equals to IMX_SC_R_DMA_2_CH5, so there should be two entries in imx8qxp_scu_pd_ranges, otherwise the imx_scu_add_pm_domain may filter out wrong power domains. Fixes: 927b7d1 ("genpd: imx: scu-pd: enlarge PD range") Reported-by: Dong Aisheng <Aisheng.dong@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com> Link: https://lore.kernel.org/r/20231001123853.200773-1-peng.fan@oss.nxp.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

When calling mcb_bus_add_devices(), both mcb devices and the mcb bus will attempt to attach a device to a driver because they share the same bus_type. This causes an issue when trying to cast the container of the device to mcb_device struct using to_mcb_device(), leading to a wrong cast when the mcb_bus is added. A crash occurs when freing the ida resources as the bus numbering of mcb_bus gets confused with the is_added flag on the mcb_device struct. The only reason for this cast was to keep an is_added flag on the mcb_device struct that does not seem necessary. The function device_attach() handles already bound devices and the mcb subsystem does nothing special with this is_added flag so remove it completely. Fixes: 18d2881 ("mcb: Correctly initialize the bus's device") Cc: stable <stable@kernel.org> Signed-off-by: Jorge Sanjuan Garcia <jorge.sanjuangarcia@duagon.com> Co-developed-by: Jose Javier Rodriguez Barbarin <JoseJavier.Rodriguez@duagon.com> Signed-off-by: Jose Javier Rodriguez Barbarin <JoseJavier.Rodriguez@duagon.com> Link: https://lore.kernel.org/r/20230906114901.63174-2-JoseJavier.Rodriguez@duagon.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

When a fence signals there is a very small race window where the timestamp isn't updated yet. sync_file solves this by busy waiting for the timestamp to appear, but on other ocassions didn't handled this correctly. Provide a dma_fence_timestamp() helper function for this and use it in all appropriate cases. Another alternative would be to grab the spinlock when that happens. v2 by teddy: add a wait parameter to wait for the timestamp to show up, in case the accurate timestamp is needed and/or the timestamp is not based on ktime (e.g. hw timestamp) v3 chk: drop the parameter again for unified handling Signed-off-by: Yunxiang Li <Yunxiang.Li@amd.com> Signed-off-by: Christian König <christian.koenig@amd.com> Fixes: 1774baa ("drm/scheduler: Change scheduled fence track v2") Reviewed-by: Alex Deucher <alexander.deucher@amd.com> CC: stable@vger.kernel.org Link: https://patchwork.freedesktop.org/patch/msgid/20230929104725.2358-1-christian.koenig@amd.com

There has been a repeated misunderstanding about what the hardware embargo list is for. Clarify the language in the process so that it is clear that only fixes are coordinated. There is explicitly no prenotification process. The list members are also expected to keep total radio silence during embargoes. Cc: Thomas Gleixner <tglx@linutronix.de> Cc: workflows@vger.kernel.org Cc: linux-doc@vger.kernel.org Signed-off-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/20231004004959.work.258-kees@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Update the firmware_loader documentation and corresponding section in the MAINTAINERs file with a new email address. Signed-off-by: Russ Weight <russell.h.weight@intel.com> Link: https://lore.kernel.org/r/20230929151326.311959-1-russell.h.weight@intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

A transaction complete work is allocated and queued for each transaction. Under certain conditions the work->type might be marked as BINDER_WORK_TRANSACTION_ONEWAY_SPAM_SUSPECT to notify userspace about potential spamming threads or as BINDER_WORK_TRANSACTION_PENDING when the target is currently frozen. However, these work types are not being handled in binder_release_work() so they will leak during a cleanup. This was reported by syzkaller with the following kmemleak dump: BUG: memory leak unreferenced object 0xffff88810e2d6de0 (size 32): comm "syz-executor338", pid 5046, jiffies 4294968230 (age 13.590s) hex dump (first 32 bytes): e0 6d 2d 0e 81 88 ff ff e0 6d 2d 0e 81 88 ff ff .m-......m-..... 04 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<ffffffff81573b75>] kmalloc_trace+0x25/0x90 mm/slab_common.c:1114 [<ffffffff83d41873>] kmalloc include/linux/slab.h:599 [inline] [<ffffffff83d41873>] kzalloc include/linux/slab.h:720 [inline] [<ffffffff83d41873>] binder_transaction+0x573/0x4050 drivers/android/binder.c:3152 [<ffffffff83d45a05>] binder_thread_write+0x6b5/0x1860 drivers/android/binder.c:4010 [<ffffffff83d486dc>] binder_ioctl_write_read drivers/android/binder.c:5066 [inline] [<ffffffff83d486dc>] binder_ioctl+0x1b2c/0x3cf0 drivers/android/binder.c:5352 [<ffffffff816b25f2>] vfs_ioctl fs/ioctl.c:51 [inline] [<ffffffff816b25f2>] __do_sys_ioctl fs/ioctl.c:871 [inline] [<ffffffff816b25f2>] __se_sys_ioctl fs/ioctl.c:857 [inline] [<ffffffff816b25f2>] __x64_sys_ioctl+0xf2/0x140 fs/ioctl.c:857 [<ffffffff84b30008>] do_syscall_x64 arch/x86/entry/common.c:50 [inline] [<ffffffff84b30008>] do_syscall_64+0x38/0xb0 arch/x86/entry/common.c:80 [<ffffffff84c0008b>] entry_SYSCALL_64_after_hwframe+0x63/0xcd Fix the leaks by kfreeing these work types in binder_release_work() and handle them as a BINDER_WORK_TRANSACTION_COMPLETE cleanup. Cc: stable@vger.kernel.org Fixes: 0567461 ("binder: return pending info for frozen async txns") Fixes: a7dc1e6 ("binder: tell userspace to dump current backtrace when detected oneway spamming") Reported-by: syzbot+7f10c1653e35933c0f1e@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=7f10c1653e35933c0f1e Suggested-by: Alice Ryhl <aliceryhl@google.com> Signed-off-by: Carlos Llamas <cmllamas@google.com> Reviewed-by: Alice Ryhl <aliceryhl@google.com> Acked-by: Todd Kjos <tkjos@google.com> Link: https://lore.kernel.org/r/20230922175138.230331-1-cmllamas@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Drew found "CONFIG_DMA_GLOBAL_POOL=y causes ADMA buffer alloc to fail" the log looks like: mmc0: Unable to allocate ADMA buffers - falling back to standard DMA The logic is: generic riscv defconfig selects ARCH_RENESAS then ARCH_R9A07G043 which selects DMA_GLOBAL_POOL, which assumes all non-dma-coherent riscv platforms have a dma global pool, this assumption seems not correct. And I believe DMA_GLOBAL_POOL should not be selected by ARCH_SOCFAMILIY, instead, only ARCH under some specific conditions can select it globaly, for example NOMMU ARM and so on, because it's designed for special cases such as "nommu cases where non-cacheable memory lives in a fixed place in the physical address map" as pointed out by Robin. Fix the issue by making ARCH_R9A07G043 (riscv version) depend on NONPORTABLE, thus generic defconfig won't select ARCH_R9A07G043 by default. And even for random config case, there will be less debug effort once we see NONPORTABLE is enabled. Reported-by: Drew Fustini <dfustini@baylibre.com> Closes: https://lore.kernel.org/linux-riscv/ZRuamJuShOnvP1pr@x1/ Fixes: 484861e ("soc: renesas: Kconfig: Select the required configs for RZ/Five SoC") Signed-off-by: Jisheng Zhang <jszhang@kernel.org> Reviewed-by: Robin Murphy <robin.murphy@arm.com> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Tested-by: Drew Fustini <dfustini@baylibre.com> Link: https://lore.kernel.org/r/20231004150856.2540-1-jszhang@kernel.org Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

Bindings require vdd-supply but the example DTS was missing one. This fixes dt_binding_check error: Documentation/devicetree/bindings/iio/light/rohm,bu27010.example.dtb: light-sensor@38: 'vdd-supply' is a required property Fixes: ce2a8c1 ("dt-bindings: iio: ROHM BU27010 RGBC + flickering sensor") Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Acked-by: Rob Herring <robh@kernel.org> Reviewed-by: Matti Vaittinen <mazziesaccount@gmail.com> Link: https://lore.kernel.org/r/20230808063223.80431-1-krzysztof.kozlowski@linaro.org Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

When compiling with gcc 13 with -Warray-bounds enabled: In file included from drivers/iio/proximity/irsd200.c:15: In function ‘iio_push_to_buffers_with_timestamp’, inlined from ‘irsd200_trigger_handler’ at drivers/iio/proximity/irsd200.c:770:2: ./include/linux/iio/buffer.h:42:46: error: array subscript ‘int64_t {aka long long int}[0]’ is partly outside array bounds of ‘s16[1]’ {aka ‘short int[1]’} [-Werror=array-bounds=] 42 | ((int64_t *)data)[ts_offset] = timestamp; | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~ drivers/iio/proximity/irsd200.c: In function ‘irsd200_trigger_handler’: drivers/iio/proximity/irsd200.c:763:13: note: object ‘buf’ of size 2 763 | s16 buf = 0; | ^~~ The problem seems to be that irsd200_trigger_handler() is taking a s16 variable as an int64_t buffer. As Jonathan suggested [1], fix it by extending the buffer to a two-element array of s64. Link: KSPP#331 Link: https://lore.kernel.org/lkml/20230809181329.46c00a5d@jic23-huawei/ [1] Fixes: 3db3562 ("iio: Add driver for Murata IRS-D200") Signed-off-by: GONG, Ruiqi <gongruiqi1@huawei.com> Acked-by: Gustavo A. R. Silva <gustavoars@kernel.org> Reviewed-by: Waqar Hameed <waqar.hameed@axis.com> Tested-by: Waqar Hameed <waqar.hameed@axis.com> Reviewed-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/20230810035910.1334706-1-gongruiqi@huaweicloud.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

cros_ec_sensors_push_data() reads `indio_dev->active_scan_mask` and calls iio_push_to_buffers_with_timestamp() without making sure the `indio_dev` stays in buffer mode. There is a race if `indio_dev` exits buffer mode right before cros_ec_sensors_push_data() accesses them. An use-after-free on `indio_dev->active_scan_mask` was observed. The call trace: [...] _find_next_bit cros_ec_sensors_push_data cros_ec_sensorhub_event blocking_notifier_call_chain cros_ec_irq_thread It was caused by a race condition: one thread just freed `active_scan_mask` at [1]; while another thread tried to access the memory at [2]. Fix it by calling iio_device_claim_buffer_mode() to ensure the `indio_dev` can't exit buffer mode during cros_ec_sensors_push_data(). [1]: https://elixir.bootlin.com/linux/v6.5/source/drivers/iio/industrialio-buffer.c#L1189 [2]: https://elixir.bootlin.com/linux/v6.5/source/drivers/iio/common/cros_ec_sensors/cros_ec_sensors_core.c#L198 Cc: stable@vger.kernel.org Fixes: aa984f1 ("iio: cros_ec: Register to cros_ec_sensorhub when EC supports FIFO") Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org> Reviewed-by: Guenter Roeck <groeck@chromium.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Link: https://lore.kernel.org/r/20230829030622.1571852-1-tzungbi@kernel.org Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

The ADC Command Buffer Register high and low are currently pointing to the wrong address and makes it impossible to perform correct ADC measurements over all channels. According to the datasheet of the imx8qxp the ADC_CMDL register starts at address 0x100 and the ADC_CMDH register starts at address 0x104. This bug seems to be in the kernel since the introduction of this driver. This can be observed by checking all raw voltages of the adc and they are all nearly identical: cat /sys/bus/iio/devices/iio\:device0/in_voltage*_raw 3498 3494 3491 3491 3489 3490 3490 3490 Fixes: 1e23dca ("iio: imx8qxp-adc: Add driver support for NXP IMX8QXP ADC") Signed-off-by: Philipp Rossak <embed3d@gmail.com> Acked-by: Haibo Chen <haibo.chen@nxp.com> Link: https://lore.kernel.org/r/20230904220204.23841-1-embed3d@gmail.com Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

This driver uses IIO triggered buffers so it needs to select them in Kconfig. on riscv-32bit: /opt/crosstool/gcc-13.2.0-nolibc/riscv32-linux/bin/riscv32-linux-ld: drivers/iio/imu/bno055/bno055.o: in function `.L367': bno055.c:(.text+0x2c96): undefined reference to `devm_iio_triggered_buffer_setup_ext' Reported-by: Randy Dunlap <rdunlap@infradead.org> Closes: https://lore.kernel.org/linux-next/40566b4b-3950-81fe-ff14-871d8c447627@infradead.org/ Fixes: 4aefe1c ("iio: imu: add Bosch Sensortec BNO055 core driver") Cc: Andrea Merello <andrea.merello@iit.it> Acked-by: Randy Dunlap <rdunlap@infradead.org> Tested-by: Randy Dunlap <rdunlap@infradead.org> Link: https://lore.kernel.org/r/20230903113052.846298-1-jic23@kernel.org Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

The DPS310 sensor chip has been encountering intermittent errors while reading the sensor device across various system designs. This issue causes the chip to become "stuck," preventing the indication of "ready" status for pressure and temperature measurements in the MEAS_CFG register. To address this issue, this commit fixes the timeout settings to improve sensor stability: - After sending a reset command to the chip, the timeout has been extended from 2.5 ms to 15 ms, aligning with the DPS310 specification. - The read timeout value of the MEAS_CFG register has been adjusted from 20ms to 30ms to match the specification. Signed-off-by: Lakshmi Yadlapati <lakshmiy@us.ibm.com> Fixes: 7b4ab4a ("iio: pressure: dps310: Reset chip after timeout") Link: https://lore.kernel.org/r/20230829180222.3431926-2-lakshmiy@us.ibm.com Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Building ad74413r without selecting IIO_BUFFER and IIO_TRIGGERED_BUFFER generates error with respect to the iio trigger functions that are used within the driver. Update the Kconfig accordingly. Fixes: fea251b ("iio: addac: add AD74413R driver") Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com> Link: https://lore.kernel.org/r/20230912085421.51102-1-antoniu.miclaus@analog.com Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

After enabling/disabling interrupts on the vcnl4040 chip the als and/or ps sensor is powered on or off depending on the interrupt enable bits. This is made as a last step in write_event_config. But there is no reason to do this as the runtime PM handles the power state of the sensors. Interfering with this may impact sensor readings. Consider the following: 1. Userspace makes sensor data reading which triggers RPM resume (sensor powered on) and a RPM suspend timeout. The timeout is 2000ms before RPM suspend powers the sensor off if no new reading is made within the timeout period. 2. Userspace disables interrupts => powers sensor off 3. Userspace reads sensor data = 0 because sensor is off and the suspend timeout has not passed. For each new reading made within the timeout period the timeout is renewed with 2000ms and RPM will not make a new resume (device was not suspended). So the sensor will not be powered on. 4. No further userspace reading for 2000ms ends RPM suspend timeout and triggers suspend (powers off already powered off sensor). Powering sensor off in (2) makes all consecutive readings made within 2000ms to the previous reading (3) return invalid data. Skip setting power state when writing new event config. Fixes: 5466761 ("iio: light: vcnl4000: Add interrupt support for vcnl4040") Fixes: bc292aa ("iio: light: vcnl4000: add illuminance irq vcnl4040/4200") Signed-off-by: Mårten Lindahl <marten.lindahl@axis.com> Link: https://lore.kernel.org/r/20230907-vcnl4000-pm-fix-v2-1-298e01f54db4@axis.com Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

The avdd and the reference voltage are two different sources but the reference voltage was assigned according to the avdd supply. Add vref regulator structure and set the reference voltage according to the vref supply from the devicetree. In case vref supply is missing, reference voltage is set according to the avdd supply for compatibility with old devicetrees. Fixes: b581f74 ("staging: iio: adc: ad7192: move out of staging") Signed-off-by: Alisa-Dariana Roman <alisa.roman@analog.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20230924152149.41884-1-alisadariana@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

…l nodes "additionalProperties: true" is only for incomplete schemas such as bus child nodes in a bus's schema. That doesn't apply to the "channel" nodes in the adi,ad7292 binding, so fix additionalProperties to be false. Signed-off-by: Rob Herring <robh@kernel.org> Acked-by: Conor Dooley <conor.dooley@microchip.com> Acked-by: Marcelo Schmitt <marcelo.schmitt1@gmail.com> Link: https://lore.kernel.org/r/20230926164357.100325-1-robh@kernel.org Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

The ms5611 driver falsely rejects lots of MS5607-02BA03-50 chips with "PROM integrity check failed" because it doesn't accept a prom crc value of zero as legitimate. According to the datasheet for this chip (and the manufacturer's application note about the PROM CRC), none of the possible values for the CRC are excluded - but the current code in ms5611_prom_is_valid() ends with return crc_orig != 0x0000 && crc == crc_orig Discussed with the driver author (Tomasz Duszynski) and he indicated that at that time (2015) he was dealing with some faulty chip samples which returned blank data under some circumstances and/or followed example code which indicated CRC zero being bad. As far as I can tell this exception should not be applied anymore; We've got a few hundred custom boards here with this chip where large numbers of the prom have a legitimate CRC value 0, and do work fine, but which the current driver code wrongly rejects. Signed-off-by: Alexander Zangerl <az@breathe-safe.com> Fixes: c064416 ("iio: pressure: add support for MS5611 pressure and temperature sensor") Link: https://lore.kernel.org/r/2535-1695168070.831792@Ze3y.dhYT.s3fx Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Currently, dpu_plane_atomic_check() does not check whether the plane can process the image without exceeding the per chipset limits for MDP clock. This leads to underflow issues because the SSPP is not able to complete the processing for the data rate of the display. Fail the dpu_plane_atomic_check() if the SSPP cannot process the image without exceeding the MDP clock limits. changes in v2: - use crtc_state's adjusted_mode instead of mode Fixes: 25fdd59 ("drm/msm: Add SDM845 DPU support") Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/556819/ Link: https://lore.kernel.org/r/20230911221627.9569-1-quic_abhinavk@quicinc.com

A skcipher_request object is made up of struct skcipher_request followed by a variable-sized trailer. The allocation of the skcipher_request and IV in crypt_iv_eboiv_gen is missing the memory for struct skcipher_request. Fix it by adding it to reqsize. Fixes: e302309 ("dm crypt: Avoid using MAX_CIPHER_BLOCKSIZE") Cc: <stable@vger.kernel.org> #6.5+ Reported-by: Tatu Heikkilä <tatu.heikkila@gmail.com> Reviewed-by: Mike Snitzer <snitzer@kernel.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

A recent commit reordered probe so that the interrupt line is now requested before making sure that the device exists. This breaks machines like the Lenovo ThinkPad X13s which rely on the HID driver to probe second-source devices and only register the variant that is actually populated. Specifically, the interrupt line may now already be (temporarily) claimed when doing asynchronous probing of the touchpad: genirq: Flags mismatch irq 191. 00082008 (hid-over-i2c) vs. 00082008 (hid-over-i2c) i2c_hid_of 21-0015: Could not register for hid-over-i2c interrupt, irq = 191, ret = -16 i2c_hid_of: probe of 21-0015 failed with error -16 Fix this by restoring the old behaviour of first making sure the device exists before requesting the interrupt line. Note that something like this should probably be implemented also for "panel followers", whose actual probe is currently effectively deferred until the DRM panel is probed (e.g. by powering down the device after making sure it exists and only then register it as a follower). Fixes: 675cd87 ("HID: i2c-hid: Rearrange probe() to power things up later") Cc: Douglas Anderson <dianders@chromium.org> Cc: Maxime Ripard <mripard@kernel.org> Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Tested-by: Dennis Gilmore <dgilmore@redhat.com> Reviewed-by: Douglas Anderson <dianders@chromium.org> Tested-by: Douglas Anderson <dianders@chromium.org> Link: https://lore.kernel.org/r/20231002155857.24584-1-johan+linaro@kernel.org Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>

Eric has reported that commit dabc8b2 ("quota: fix dqput() to follow the guarantees dquot_srcu should provide") heavily increases runtime of generic/270 xfstest for ext4 in nojournal mode. The reason for this is that ext4 in nojournal mode leaves dquots dirty until the last dqput() and thus the cleanup done in quota_release_workfn() has to write them all. Due to the way quota_release_workfn() is written this results in synchronize_srcu() call for each dirty dquot which makes the dquot cleanup when turning quotas off extremely slow. To be able to avoid synchronize_srcu() for each dirty dquot we need to rework how we track dquots to be cleaned up. Instead of keeping the last dquot reference while it is on releasing_dquots list, we drop it right away and mark the dquot with new DQ_RELEASING_B bit instead. This way we can we can remove dquot from releasing_dquots list when new reference to it is acquired and thus there's no need to call synchronize_srcu() each time we drop dq_list_lock. References: https://lore.kernel.org/all/ZRytn6CxFK2oECUt@debian-BULLSEYE-live-builder-AMD64 Reported-by: Eric Whitney <enwlinux@gmail.com> Fixes: dabc8b2 ("quota: fix dqput() to follow the guarantees dquot_srcu should provide") CC: stable@vger.kernel.org Signed-off-by: Jan Kara <jack@suse.cz>

There is an unlikely but possible double free when loading firmware, and a missing free calls if a firmware is successfully requested but the coefficient file request fails, leading to the fallback firmware request occurring without clearing the previously loaded firmware. Fixes: cd40dad ("ALSA: hda: cs35l41: Ensure firmware/tuning pairs are always loaded") Reported-by: kernel test robot <lkp@intel.com> Reported-by: Dan Carpenter <dan.carpenter@linaro.org> Closes: https://lore.kernel.org/r/202309291331.0JUUQnPT-lkp@intel.com/ Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com> Link: https://lore.kernel.org/r/20231003142138.180108-1-sbinding@opensource.cirrus.com Signed-off-by: Takashi Iwai <tiwai@suse.de>

When a Opencomm2 Headset is connected to a Bluetooth USB dongle, the audio playback functions properly, but the microphone does not work. In the dmesg logs, there are messages indicating that the init_pitch function fails when the capture process begins. The microphone only functions when the ep pitch control is not set. Toggling the pitch control off bypasses the init_piatch function and allows the microphone to work. Signed-off-by: WhaleChang <whalechang@google.com> Link: https://lore.kernel.org/r/20231006044852.4181022-1-whalechang@google.com Signed-off-by: Takashi Iwai <tiwai@suse.de>

Intel RVP board (0x12cc) has Headset Mic issue for reboot. If system plugged headset when system reboot the headset Mic was gone. Fixes: 1a93f10 ("ALSA: hda/realtek: Add "Intel Reference board" and "NUC 13" SSID in the ALC256") Signed-off-by: Kailang Yang <kailang@realtek.com> Link: https://lore.kernel.org/r/28112f54c0c6496f97ac845645bc0256@realtek.com Signed-off-by: Takashi Iwai <tiwai@suse.de>

The blamed commit added the CDR check work item but didn't cancel it on the remove path. Fix this by adding a remove function which takes care of it. Fixes: 8f73b37 ("phy: add support for the Layerscape SerDes 28G") Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>

Syzkaller reports the following bug: BUG: spinlock bad magic on CPU#1, syz-executor.0/7995 lock: 0xffff88805303f3e0, .magic: 00000000, .owner: <none>/-1, .owner_cpu: 0 CPU: 1 PID: 7995 Comm: syz-executor.0 Tainted: G E 5.10.209+ #1 Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 11/12/2020 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x119/0x179 lib/dump_stack.c:118 debug_spin_lock_before kernel/locking/spinlock_debug.c:83 [inline] do_raw_spin_lock+0x1f6/0x270 kernel/locking/spinlock_debug.c:112 __raw_spin_lock_irqsave include/linux/spinlock_api_smp.h:117 [inline] _raw_spin_lock_irqsave+0x50/0x70 kernel/locking/spinlock.c:159 reset_per_cpu_data+0xe6/0x240 [drop_monitor] net_dm_cmd_trace+0x43d/0x17a0 [drop_monitor] genl_family_rcv_msg_doit+0x22f/0x330 net/netlink/genetlink.c:739 genl_family_rcv_msg net/netlink/genetlink.c:783 [inline] genl_rcv_msg+0x341/0x5a0 net/netlink/genetlink.c:800 netlink_rcv_skb+0x14d/0x440 net/netlink/af_netlink.c:2497 genl_rcv+0x29/0x40 net/netlink/genetlink.c:811 netlink_unicast_kernel net/netlink/af_netlink.c:1322 [inline] netlink_unicast+0x54b/0x800 net/netlink/af_netlink.c:1348 netlink_sendmsg+0x914/0xe00 net/netlink/af_netlink.c:1916 sock_sendmsg_nosec net/socket.c:651 [inline] __sock_sendmsg+0x157/0x190 net/socket.c:663 ____sys_sendmsg+0x712/0x870 net/socket.c:2378 ___sys_sendmsg+0xf8/0x170 net/socket.c:2432 __sys_sendmsg+0xea/0x1b0 net/socket.c:2461 do_syscall_64+0x30/0x40 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x62/0xc7 RIP: 0033:0x7f3f9815aee9 Code: ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b0 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f3f972bf0c8 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 00007f3f9826d050 RCX: 00007f3f9815aee9 RDX: 0000000020000000 RSI: 0000000020001300 RDI: 0000000000000007 RBP: 00007f3f981b63bd R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 000000000000006e R14: 00007f3f9826d050 R15: 00007ffe01ee6768 If drop_monitor is built as a kernel module, syzkaller may have time to send a netlink NET_DM_CMD_START message during the module loading. This will call the net_dm_monitor_start() function that uses a spinlock that has not yet been initialized. To fix this, let's place resource initialization above the registration of a generic netlink family. Found by InfoTeCS on behalf of Linux Verification Center (linuxtesting.org) with Syzkaller. Fixes: 9a8afc8 ("Network Drop Monitor: Adding drop monitor implementation & Netlink protocol") Cc: stable@vger.kernel.org Signed-off-by: Ilia Gavrilov <Ilia.Gavrilov@infotecs.ru> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Link: https://patch.msgid.link/20250213152054.2785669-1-Ilia.Gavrilov@infotecs.ru Signed-off-by: Jakub Kicinski <kuba@kernel.org>

A softlockup issue was found with stress test: watchdog: BUG: soft lockup - CPU#27 stuck for 26s! [migration/27:181] CPU: 27 UID: 0 PID: 181 Comm: migration/27 6.14.0-rc2-next-20250210 #1 Stopper: multi_cpu_stop <- stop_machine_from_inactive_cpu RIP: 0010:stop_machine_yield+0x2/0x10 RSP: 0000:ff4a0dcecd19be48 EFLAGS: 00000246 RAX: ffffffff89c0108f RBX: ff4a0dcec03afe44 RCX: 0000000000000000 RDX: ff1cdaaf6eba5808 RSI: 0000000000000282 RDI: ff1cda80c1775a40 RBP: 0000000000000001 R08: 00000011620096c6 R09: 7fffffffffffffff R10: 0000000000000001 R11: 0000000000000100 R12: ff1cda80c1775a40 R13: 0000000000000000 R14: 0000000000000001 R15: ff4a0dcec03afe20 FS: 0000000000000000(0000) GS:ff1cdaaf6eb80000(0000) CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 00000025e2c2a001 CR4: 0000000000773ef0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: multi_cpu_stop+0x8f/0x100 cpu_stopper_thread+0x90/0x140 smpboot_thread_fn+0xad/0x150 kthread+0xc2/0x100 ret_from_fork+0x2d/0x50 The stress test involves CPU hotplug operations and memory control group (memcg) operations. The scenario can be described as follows: echo xx > memory.max cache_ap_online oom_reaper (CPU23) (CPU50) xx < usage stop_machine_from_inactive_cpu for(;;) // all active cpus trigger OOM queue_stop_cpus_work // waiting oom_reaper multi_cpu_stop(migration/xx) // sync all active cpus ack // waiting cpu23 ack // CPU50 loops in multi_cpu_stop waiting cpu50 Detailed explanation: 1. When the usage is larger than xx, an OOM may be triggered. If the process does not handle with ths kill signal immediately, it will loop in the memory_max_write. 2. When cache_ap_online is triggered, the multi_cpu_stop is queued to the active cpus. Within the multi_cpu_stop function, it attempts to synchronize the CPU states. However, the CPU23 didn't acknowledge because it is stuck in a loop within the for(;;). 3. The oom_reaper process is blocked because CPU50 is in a loop, waiting for CPU23 to acknowledge the synchronization request. 4. Finally, it formed cyclic dependency and lead to softlockup and dead loop. To fix this issue, add cond_resched() in the memory_max_write, so that it will not block migration task. Link: https://lkml.kernel.org/r/20250211081819.33307-1-chenridong@huaweicloud.com Fixes: b6e6edc ("mm: memcontrol: reclaim and OOM kill when shrinking memory.max below usage") Signed-off-by: Chen Ridong <chenridong@huawei.com> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Roman Gushchin <roman.gushchin@linux.dev> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Shakeel Butt <shakeel.butt@linux.dev> Cc: Muchun Song <songmuchun@bytedance.com> Cc: Wang Weiyang <wangweiyang2@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

The namespace percpu counter protects pending I/O, and we can only safely diable the namespace once the counter drop to zero. Otherwise we end up with a crash when running blktests/nvme/058 (eg for loop transport): [ 2352.930426] [ T53909] Oops: general protection fault, probably for non-canonical address 0xdffffc0000000005: 0000 [#1] PREEMPT SMP KASAN PTI [ 2352.930431] [ T53909] KASAN: null-ptr-deref in range [0x0000000000000028-0x000000000000002f] [ 2352.930434] [ T53909] CPU: 3 UID: 0 PID: 53909 Comm: kworker/u16:5 Tainted: G W 6.13.0-rc6 torvalds#232 [ 2352.930438] [ T53909] Tainted: [W]=WARN [ 2352.930440] [ T53909] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-3.fc41 04/01/2014 [ 2352.930443] [ T53909] Workqueue: nvmet-wq nvme_loop_execute_work [nvme_loop] [ 2352.930449] [ T53909] RIP: 0010:blkcg_set_ioprio+0x44/0x180 as the queue is already torn down when calling submit_bio(); So we need to init the percpu counter in nvmet_ns_enable(), and wait for it to drop to zero in nvmet_ns_disable() to avoid having I/O pending after the namespace has been disabled. Fixes: 74d1696 ("nvmet-loop: avoid using mutex in IO hotpath") Signed-off-by: Hannes Reinecke <hare@kernel.org> Reviewed-by: Nilay Shroff <nilay@linux.ibm.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Tested-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com> Signed-off-by: Keith Busch <kbusch@kernel.org>

The delayed work item function nvmet_pci_epf_poll_sqs_work() polls all submission queues and keeps running in a loop as long as commands are being submitted by the host. Depending on the preemption configuration of the kernel, under heavy command workload, this function can thus run for more than RCU_CPU_STALL_TIMEOUT seconds, leading to a RCU stall: rcu: INFO: rcu_sched self-detected stall on CPU rcu: 5-....: (20998 ticks this GP) idle=4244/1/0x4000000000000000 softirq=301/301 fqs=5132 rcu: (t=21000 jiffies g=-443 q=12 ncpus=8) CPU: 5 UID: 0 PID: 82 Comm: kworker/5:1 Not tainted 6.14.0-rc2 #1 Hardware name: Radxa ROCK 5B (DT) Workqueue: events nvmet_pci_epf_poll_sqs_work [nvmet_pci_epf] pstate: 60400009 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : dw_edma_device_tx_status+0xb8/0x130 lr : dw_edma_device_tx_status+0x9c/0x130 sp : ffff800080b5bbb0 x29: ffff800080b5bbb0 x28: ffff0331c5c78400 x27: ffff0331c1cd1960 x26: ffff0331c0e39010 x25: ffff0331c20e4000 x24: ffff0331c20e4a90 x23: 0000000000000000 x22: 0000000000000001 x21: 00000000005aca33 x20: ffff800080b5bc30 x19: ffff0331c123e370 x18: 000000000ab29e62 x17: ffffb2a878c9c118 x16: ffff0335bde82040 x15: 0000000000000000 x14: 000000000000017b x13: 00000000ee601780 x12: 0000000000000018 x11: 0000000000000000 x10: 0000000000000001 x9 : 0000000000000040 x8 : 00000000ee601780 x7 : 0000000105c785c0 x6 : ffff0331c1027d80 x5 : 0000000001ee7ad6 x4 : ffff0335bdea16c0 x3 : ffff0331c123e438 x2 : 00000000005aca33 x1 : 0000000000000000 x0 : ffff0331c123e410 Call trace: dw_edma_device_tx_status+0xb8/0x130 (P) dma_sync_wait+0x60/0xbc nvmet_pci_epf_dma_transfer+0x128/0x264 [nvmet_pci_epf] nvmet_pci_epf_poll_sqs_work+0x2a0/0x2e0 [nvmet_pci_epf] process_one_work+0x144/0x390 worker_thread+0x27c/0x458 kthread+0xe8/0x19c ret_from_fork+0x10/0x20 The solution for this is simply to explicitly allow rescheduling using cond_resched(). However, since doing so for every loop of nvmet_pci_epf_poll_sqs_work() significantly degrades performance (for 4K random reads using 4 I/O queues, the maximum IOPS goes down from 137 KIOPS to 110 KIOPS), call cond_resched() every second to avoid the RCU stalls. Fixes: 0faa0fe ("nvmet: New NVMe PCI endpoint function target driver") Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Keith Busch <kbusch@kernel.org>

For the ACPI backend of UCSI the UCSI "registers" are just a memory copy of the register values in an opregion. The ACPI implementation in the BIOS ensures that the opregion contents are synced to the embedded controller and it ensures that the registers (in particular CCI) are synced back to the opregion on notifications. While there is an ACPI call that syncs the actual registers to the opregion there is rarely a need to do this and on some ACPI implementations it actually breaks in various interesting ways. The only reason to force a sync from the embedded controller is to poll CCI while notifications are disabled. Only the ucsi core knows if this is the case and guessing based on the current command is suboptimal, i.e. leading to the following spurious assertion splat: WARNING: CPU: 3 PID: 76 at drivers/usb/typec/ucsi/ucsi.c:1388 ucsi_reset_ppm+0x1b4/0x1c0 [typec_ucsi] CPU: 3 UID: 0 PID: 76 Comm: kworker/3:0 Not tainted 6.12.11-200.fc41.x86_64 #1 Hardware name: LENOVO 21D0/LNVNB161216, BIOS J6CN45WW 03/17/2023 Workqueue: events_long ucsi_init_work [typec_ucsi] RIP: 0010:ucsi_reset_ppm+0x1b4/0x1c0 [typec_ucsi] Call Trace: <TASK> ucsi_init_work+0x3c/0xac0 [typec_ucsi] process_one_work+0x179/0x330 worker_thread+0x252/0x390 kthread+0xd2/0x100 ret_from_fork+0x34/0x50 ret_from_fork_asm+0x1a/0x30 </TASK> Thus introduce a ->poll_cci() method that works like ->read_cci() with an additional forced sync and document that this should be used when polling with notifications disabled. For all other backends that presumably don't have this issue use the same implementation for both methods. Fixes: fa48d7e ("usb: typec: ucsi: Do not call ACPI _DSM method for UCSI read operations") Cc: stable <stable@kernel.org> Signed-off-by: Christian A. Ehrhardt <lk@c--e.de> Tested-by: Fedor Pchelkin <boddah8794@gmail.com> Signed-off-by: Fedor Pchelkin <boddah8794@gmail.com> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/20250217105442.113486-2-boddah8794@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Brad Spengler reported the list_del() corruption splat in gtp_net_exit_batch_rtnl(). [0] Commit eb28fd7 ("gtp: Destroy device along with udp socket's netns dismantle.") added the for_each_netdev() loop in gtp_net_exit_batch_rtnl() to destroy devices in each netns as done in geneve and ip tunnels. However, this could trigger ->dellink() twice for the same device during ->exit_batch_rtnl(). Say we have two netns A & B and gtp device B that resides in netns B but whose UDP socket is in netns A. 1. cleanup_net() processes netns A and then B. 2. gtp_net_exit_batch_rtnl() finds the device B while iterating netns A's gn->gtp_dev_list and calls ->dellink(). [ device B is not yet unlinked from netns B as unregister_netdevice_many() has not been called. ] 3. gtp_net_exit_batch_rtnl() finds the device B while iterating netns B's for_each_netdev() and calls ->dellink(). gtp_dellink() cleans up the device's hash table, unlinks the dev from gn->gtp_dev_list, and calls unregister_netdevice_queue(). Basically, calling gtp_dellink() multiple times is fine unless CONFIG_DEBUG_LIST is enabled. Let's remove for_each_netdev() in gtp_net_exit_batch_rtnl() and delegate the destruction to default_device_exit_batch() as done in bareudp. [0]: list_del corruption, ffff8880aaa62c00->next (autoslab_size_M_dev_P_net_core_dev_11127_8_1328_8_S_4096_A_64_n_139+0xc00/0x1000 [slab object]) is LIST_POISON1 (ffffffffffffff02) (prev is 0xffffffffffffff04) kernel BUG at lib/list_debug.c:58! Oops: invalid opcode: 0000 [#1] PREEMPT SMP KASAN CPU: 1 UID: 0 PID: 1804 Comm: kworker/u8:7 Tainted: G T 6.12.13-grsec-full-20250211091339 #1 Tainted: [T]=RANDSTRUCT Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014 Workqueue: netns cleanup_net RIP: 0010:[<ffffffff84947381>] __list_del_entry_valid_or_report+0x141/0x200 lib/list_debug.c:58 Code: c2 76 91 31 c0 e8 9f b1 f7 fc 0f 0b 4d 89 f0 48 c7 c1 02 ff ff ff 48 89 ea 48 89 ee 48 c7 c7 e0 c2 76 91 31 c0 e8 7f b1 f7 fc <0f> 0b 4d 89 e8 48 c7 c1 04 ff ff ff 48 89 ea 48 89 ee 48 c7 c7 60 RSP: 0018:fffffe8040b4fbd0 EFLAGS: 00010283 RAX: 00000000000000cc RBX: dffffc0000000000 RCX: ffffffff818c4054 RDX: ffffffff84947381 RSI: ffffffff818d1512 RDI: 0000000000000000 RBP: ffff8880aaa62c00 R08: 0000000000000001 R09: fffffbd008169f32 R10: fffffe8040b4f997 R11: 0000000000000001 R12: a1988d84f24943e4 R13: ffffffffffffff02 R14: ffffffffffffff04 R15: ffff8880aaa62c08 RBX: kasan shadow of 0x0 RCX: __wake_up_klogd.part.0+0x74/0xe0 kernel/printk/printk.c:4554 RDX: __list_del_entry_valid_or_report+0x141/0x200 lib/list_debug.c:58 RSI: vprintk+0x72/0x100 kernel/printk/printk_safe.c:71 RBP: autoslab_size_M_dev_P_net_core_dev_11127_8_1328_8_S_4096_A_64_n_139+0xc00/0x1000 [slab object] RSP: process kstack fffffe8040b4fbd0+0x7bd0/0x8000 [kworker/u8:7+netns 1804 ] R09: kasan shadow of process kstack fffffe8040b4f990+0x7990/0x8000 [kworker/u8:7+netns 1804 ] R10: process kstack fffffe8040b4f997+0x7997/0x8000 [kworker/u8:7+netns 1804 ] R15: autoslab_size_M_dev_P_net_core_dev_11127_8_1328_8_S_4096_A_64_n_139+0xc08/0x1000 [slab object] FS: 0000000000000000(0000) GS:ffff888116000000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000748f5372c000 CR3: 0000000015408000 CR4: 00000000003406f0 shadow CR4: 00000000003406f0 Stack: 0000000000000000 ffffffff8a0c35e7 ffffffff8a0c3603 ffff8880aaa62c00 ffff8880aaa62c00 0000000000000004 ffff88811145311c 0000000000000005 0000000000000001 ffff8880aaa62000 fffffe8040b4fd40 ffffffff8a0c360d Call Trace: <TASK> [<ffffffff8a0c360d>] __list_del_entry_valid include/linux/list.h:131 [inline] fffffe8040b4fc28 [<ffffffff8a0c360d>] __list_del_entry include/linux/list.h:248 [inline] fffffe8040b4fc28 [<ffffffff8a0c360d>] list_del include/linux/list.h:262 [inline] fffffe8040b4fc28 [<ffffffff8a0c360d>] gtp_dellink+0x16d/0x360 drivers/net/gtp.c:1557 fffffe8040b4fc28 [<ffffffff8a0d0404>] gtp_net_exit_batch_rtnl+0x124/0x2c0 drivers/net/gtp.c:2495 fffffe8040b4fc88 [<ffffffff8e705b24>] cleanup_net+0x5a4/0xbe0 net/core/net_namespace.c:635 fffffe8040b4fcd0 [<ffffffff81754c97>] process_one_work+0xbd7/0x2160 kernel/workqueue.c:3326 fffffe8040b4fd88 [<ffffffff81757195>] process_scheduled_works kernel/workqueue.c:3407 [inline] fffffe8040b4fec0 [<ffffffff81757195>] worker_thread+0x6b5/0xfa0 kernel/workqueue.c:3488 fffffe8040b4fec0 [<ffffffff817782a0>] kthread+0x360/0x4c0 kernel/kthread.c:397 fffffe8040b4ff78 [<ffffffff814d8594>] ret_from_fork+0x74/0xe0 arch/x86/kernel/process.c:172 fffffe8040b4ffb8 [<ffffffff8110f509>] ret_from_fork_asm+0x29/0xc0 arch/x86/entry/entry_64.S:399 fffffe8040b4ffe8 </TASK> Modules linked in: Fixes: eb28fd7 ("gtp: Destroy device along with udp socket's netns dismantle.") Reported-by: Brad Spengler <spender@grsecurity.net> Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Link: https://patch.msgid.link/20250217203705.40342-2-kuniyu@amazon.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Devices created through binderfs are added to the global binder_devices list but are not removed before being destroyed. This leads to dangling pointers in the list and subsequent use-after-free errors: ================================================================== BUG: KASAN: slab-use-after-free in binder_add_device+0x5c/0x9c Write of size 8 at addr ffff0000c258d708 by task mount/653 CPU: 7 UID: 0 PID: 653 Comm: mount Not tainted 6.13.0-09030-g6d61a53dd6f5 #1 Hardware name: linux,dummy-virt (DT) Call trace: binder_add_device+0x5c/0x9c binderfs_binder_device_create+0x690/0x84c [...] __arm64_sys_mount+0x324/0x3bc Allocated by task 632: binderfs_binder_device_create+0x168/0x84c binder_ctl_ioctl+0xfc/0x184 [...] __arm64_sys_ioctl+0x110/0x150 Freed by task 649: kfree+0xe0/0x338 binderfs_evict_inode+0x138/0x1dc [...] ================================================================== Remove devices from binder_devices before destroying them. Cc: Li Li <dualli@google.com> Reported-by: syzbot+7015dcf45953112c8b45@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=7015dcf45953112c8b45 Fixes: 12d909c ("binderfs: add new binder devices to binder_devices") Signed-off-by: Carlos Llamas <cmllamas@google.com> Tested-by: syzbot+7015dcf45953112c8b45@syzkaller.appspotmail.com Link: https://lore.kernel.org/r/20250130215823.1518990-1-cmllamas@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

…umers While using nvme target with use_srq on, below kernel panic is noticed. [ 549.698111] bnxt_en 0000:41:00.0 enp65s0np0: FEC autoneg off encoding: Clause 91 RS(544,514) [ 566.393619] Oops: divide error: 0000 [#1] PREEMPT SMP NOPTI .. [ 566.393799] <TASK> [ 566.393807] ? __die_body+0x1a/0x60 [ 566.393823] ? die+0x38/0x60 [ 566.393835] ? do_trap+0xe4/0x110 [ 566.393847] ? bnxt_qplib_alloc_init_hwq+0x1d4/0x580 [bnxt_re] [ 566.393867] ? bnxt_qplib_alloc_init_hwq+0x1d4/0x580 [bnxt_re] [ 566.393881] ? do_error_trap+0x7c/0x120 [ 566.393890] ? bnxt_qplib_alloc_init_hwq+0x1d4/0x580 [bnxt_re] [ 566.393911] ? exc_divide_error+0x34/0x50 [ 566.393923] ? bnxt_qplib_alloc_init_hwq+0x1d4/0x580 [bnxt_re] [ 566.393939] ? asm_exc_divide_error+0x16/0x20 [ 566.393966] ? bnxt_qplib_alloc_init_hwq+0x1d4/0x580 [bnxt_re] [ 566.393997] bnxt_qplib_create_srq+0xc9/0x340 [bnxt_re] [ 566.394040] bnxt_re_create_srq+0x335/0x3b0 [bnxt_re] [ 566.394057] ? srso_return_thunk+0x5/0x5f [ 566.394068] ? __init_swait_queue_head+0x4a/0x60 [ 566.394090] ib_create_srq_user+0xa7/0x150 [ib_core] [ 566.394147] nvmet_rdma_queue_connect+0x7d0/0xbe0 [nvmet_rdma] [ 566.394174] ? lock_release+0x22c/0x3f0 [ 566.394187] ? srso_return_thunk+0x5/0x5f Page size and shift info is set only for the user space SRQs. Set page size and page shift for kernel space SRQs also. Fixes: 0c4dcd6 ("RDMA/bnxt_re: Refactor hardware queue memory allocation") Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com> Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com> Link: https://patch.msgid.link/1740237621-29291-1-git-send-email-selvin.xavier@broadcom.com Signed-off-by: Leon Romanovsky <leon@kernel.org>

into HEAD KVM/riscv fixes for 6.14, take #1 - Fix hart status check in SBI HSM extension - Fix hart suspend_type usage in SBI HSM extension - Fix error returned by SBI IPI and TIME extensions for unsupported function IDs - Fix suspend_type usage in SBI SUSP extension - Remove unnecessary vcpu kick after injecting interrupt via IMSIC guest file

nvme_tcp_poll() may race with the send path error handler because it may complete the request while it is actively being polled for completion, resulting in a UAF panic [1]: We should make sure to stop polling when we see an error when trying to read from the socket. Hence make sure to propagate the error so that the block layer breaks the polling cycle. [1]: -- [35665.692310] nvme nvme2: failed to send request -13 [35665.702265] nvme nvme2: unsupported pdu type (3) [35665.702272] BUG: kernel NULL pointer dereference, address: 0000000000000000 [35665.702542] nvme nvme2: queue 1 receive failed: -22 [35665.703209] #PF: supervisor write access in kernel mode [35665.703213] #PF: error_code(0x0002) - not-present page [35665.703214] PGD 8000003801cce067 P4D 8000003801cce067 PUD 37e6f79067 PMD 0 [35665.703220] Oops: 0002 [#1] SMP PTI [35665.703658] nvme nvme2: starting error recovery [35665.705809] Hardware name: Inspur aaabbb/YZMB-00882-104, BIOS 4.1.26 09/22/2022 [35665.705812] Workqueue: kblockd blk_mq_requeue_work [35665.709172] RIP: 0010:_raw_spin_lock+0xc/0x30 [35665.715788] Call Trace: [35665.716201] <TASK> [35665.716613] ? show_trace_log_lvl+0x1c1/0x2d9 [35665.717049] ? show_trace_log_lvl+0x1c1/0x2d9 [35665.717457] ? blk_mq_request_bypass_insert+0x2c/0xb0 [35665.717950] ? __die_body.cold+0x8/0xd [35665.718361] ? page_fault_oops+0xac/0x140 [35665.718749] ? blk_mq_start_request+0x30/0xf0 [35665.719144] ? nvme_tcp_queue_rq+0xc7/0x170 [nvme_tcp] [35665.719547] ? exc_page_fault+0x62/0x130 [35665.719938] ? asm_exc_page_fault+0x22/0x30 [35665.720333] ? _raw_spin_lock+0xc/0x30 [35665.720723] blk_mq_request_bypass_insert+0x2c/0xb0 [35665.721101] blk_mq_requeue_work+0xa5/0x180 [35665.721451] process_one_work+0x1e8/0x390 [35665.721809] worker_thread+0x53/0x3d0 [35665.722159] ? process_one_work+0x390/0x390 [35665.722501] kthread+0x124/0x150 [35665.722849] ? set_kthread_struct+0x50/0x50 [35665.723182] ret_from_fork+0x1f/0x30 Reported-by: Zhang Guanghui <zhang.guanghui@cestc.cn> Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Signed-off-by: Keith Busch <kbusch@kernel.org>

We have recently seen reports of lockdep circular lock dependency warnings when loading the iAVF driver: [ 1504.790308] ====================================================== [ 1504.790309] WARNING: possible circular locking dependency detected [ 1504.790310] 6.13.0 #net_next_rt.c2933b2befe2.el9 Not tainted [ 1504.790311] ------------------------------------------------------ [ 1504.790312] kworker/u128:0/13566 is trying to acquire lock: [ 1504.790313] ffff97d0e4738f18 (&dev->lock){+.+.}-{4:4}, at: register_netdevice+0x52c/0x710 [ 1504.790320] [ 1504.790320] but task is already holding lock: [ 1504.790321] ffff97d0e47392e8 (&adapter->crit_lock){+.+.}-{4:4}, at: iavf_finish_config+0x37/0x240 [iavf] [ 1504.790330] [ 1504.790330] which lock already depends on the new lock. [ 1504.790330] [ 1504.790330] [ 1504.790330] the existing dependency chain (in reverse order) is: [ 1504.790331] [ 1504.790331] -> #1 (&adapter->crit_lock){+.+.}-{4:4}: [ 1504.790333] __lock_acquire+0x52d/0xbb0 [ 1504.790337] lock_acquire+0xd9/0x330 [ 1504.790338] mutex_lock_nested+0x4b/0xb0 [ 1504.790341] iavf_finish_config+0x37/0x240 [iavf] [ 1504.790347] process_one_work+0x248/0x6d0 [ 1504.790350] worker_thread+0x18d/0x330 [ 1504.790352] kthread+0x10e/0x250 [ 1504.790354] ret_from_fork+0x30/0x50 [ 1504.790357] ret_from_fork_asm+0x1a/0x30 [ 1504.790361] [ 1504.790361] -> #0 (&dev->lock){+.+.}-{4:4}: [ 1504.790364] check_prev_add+0xf1/0xce0 [ 1504.790366] validate_chain+0x46a/0x570 [ 1504.790368] __lock_acquire+0x52d/0xbb0 [ 1504.790370] lock_acquire+0xd9/0x330 [ 1504.790371] mutex_lock_nested+0x4b/0xb0 [ 1504.790372] register_netdevice+0x52c/0x710 [ 1504.790374] iavf_finish_config+0xfa/0x240 [iavf] [ 1504.790379] process_one_work+0x248/0x6d0 [ 1504.790381] worker_thread+0x18d/0x330 [ 1504.790383] kthread+0x10e/0x250 [ 1504.790385] ret_from_fork+0x30/0x50 [ 1504.790387] ret_from_fork_asm+0x1a/0x30 [ 1504.790389] [ 1504.790389] other info that might help us debug this: [ 1504.790389] [ 1504.790389] Possible unsafe locking scenario: [ 1504.790389] [ 1504.790390] CPU0 CPU1 [ 1504.790391] ---- ---- [ 1504.790391] lock(&adapter->crit_lock); [ 1504.790393] lock(&dev->lock); [ 1504.790394] lock(&adapter->crit_lock); [ 1504.790395] lock(&dev->lock); [ 1504.790397] [ 1504.790397] *** DEADLOCK *** This appears to be caused by the change in commit 5fda3f3 ("net: make netdev_lock() protect netdev->reg_state"), which added a netdev_lock() in register_netdevice. The iAVF driver calls register_netdevice() from iavf_finish_config(), as a final stage of its state machine post-probe. It currently takes the RTNL lock, then the netdev lock, and then the device critical lock. This pattern is used throughout the driver. Thus there is a strong dependency that the crit_lock should not be acquired before the net device lock. The change to register_netdevice creates an ABBA lock order violation because the iAVF driver is holding the crit_lock while calling register_netdevice, which then takes the netdev_lock. It seems likely that future refactors could result in netdev APIs which hold the netdev_lock while calling into the driver. This means that we should not re-order the locks so that netdev_lock is acquired after the device private crit_lock. Instead, notice that we already release the netdev_lock prior to calling the register_netdevice. This flow only happens during the early driver initialization as we transition through the __IAVF_STARTUP, __IAVF_INIT_VERSION_CHECK, __IAVF_INIT_GET_RESOURCES, etc. Analyzing the places where we take crit_lock in the driver there are two sources: a) several of the work queue tasks including adminq_task, watchdog_task, reset_task, and the finish_config task. b) various callbacks which ultimately stem back to .ndo operations or ethtool operations. The latter cannot be triggered until after the netdevice registration is completed successfully. The iAVF driver uses alloc_ordered_workqueue, which is an unbound workqueue that has a max limit of 1, and thus guarantees that only a single work item on the queue is executing at any given time, so none of the other work threads could be executing due to the ordered workqueue guarantees. The iavf_finish_config() function also does not do anything else after register_netdevice, unless it fails. It seems unlikely that the driver private crit_lock is protecting anything that register_netdevice() itself touches. Thus, to fix this ABBA lock violation, lets simply release the adapter->crit_lock as well as netdev_lock prior to calling register_netdevice(). We do still keep holding the RTNL lock as required by the function. If we do fail to register the netdevice, then we re-acquire the adapter critical lock to finish the transition back to __IAVF_INIT_CONFIG_ADAPTER. This ensures every call where both netdev_lock and the adapter->crit_lock are acquired under the same ordering. Fixes: afc6649 ("eth: iavf: extend the netdev_lock usage") Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Reviewed-by: Jakub Kicinski <kuba@kernel.org> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://patch.msgid.link/20250224190647.3601930-5-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>

The customer reports that there is a soft lockup issue related to the i2c driver. After checking, the i2c module was doing a tx transfer and the bmc machine reboots in the middle of the i2c transaction, the i2c module keeps the status without being reset. Due to such an i2c module status, the i2c irq handler keeps getting triggered since the i2c irq handler is registered in the kernel booting process after the bmc machine is doing a warm rebooting. The continuous triggering is stopped by the soft lockup watchdog timer. Disable the interrupt enable bit in the i2c module before calling devm_request_irq to fix this issue since the i2c relative status bit is read-only. Here is the soft lockup log. [ 28.176395] watchdog: BUG: soft lockup - CPU#0 stuck for 26s! [swapper/0:1] [ 28.183351] Modules linked in: [ 28.186407] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.15.120-yocto-s-dirty-bbebc78 #1 [ 28.201174] pstate: 40000005 (nZcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 28.208128] pc : __do_softirq+0xb0/0x368 [ 28.212055] lr : __do_softirq+0x70/0x368 [ 28.215972] sp : ffffff8035ebca00 [ 28.219278] x29: ffffff8035ebca00 x28: 0000000000000002 x27: ffffff80071a3780 [ 28.226412] x26: ffffffc008bdc000 x25: ffffffc008bcc640 x24: ffffffc008be50c0 [ 28.233546] x23: ffffffc00800200c x22: 0000000000000000 x21: 000000000000001b [ 28.240679] x20: 0000000000000000 x19: ffffff80001c3200 x18: ffffffffffffffff [ 28.247812] x17: ffffffc02d2e0000 x16: ffffff8035eb8b40 x15: 00001e8480000000 [ 28.254945] x14: 02c3647e37dbfcb6 x13: 02c364f2ab14200c x12: 0000000002c364f2 [ 28.262078] x11: 00000000fa83b2da x10: 000000000000b67e x9 : ffffffc008010250 [ 28.269211] x8 : 000000009d983d00 x7 : 7fffffffffffffff x6 : 0000036d74732434 [ 28.276344] x5 : 00ffffffffffffff x4 : 0000000000000015 x3 : 0000000000000198 [ 28.283476] x2 : ffffffc02d2e0000 x1 : 00000000000000e0 x0 : ffffffc008bdcb40 [ 28.290611] Call trace: [ 28.293052] __do_softirq+0xb0/0x368 [ 28.296625] __irq_exit_rcu+0xe0/0x100 [ 28.300374] irq_exit+0x14/0x20 [ 28.303513] handle_domain_irq+0x68/0x90 [ 28.307440] gic_handle_irq+0x78/0xb0 [ 28.311098] call_on_irq_stack+0x20/0x38 [ 28.315019] do_interrupt_handler+0x54/0x5c [ 28.319199] el1_interrupt+0x2c/0x4c [ 28.322777] el1h_64_irq_handler+0x14/0x20 [ 28.326872] el1h_64_irq+0x74/0x78 [ 28.330269] __setup_irq+0x454/0x780 [ 28.333841] request_threaded_irq+0xd0/0x1b4 [ 28.338107] devm_request_threaded_irq+0x84/0x100 [ 28.342809] npcm_i2c_probe_bus+0x188/0x3d0 [ 28.346990] platform_probe+0x6c/0xc4 [ 28.350653] really_probe+0xcc/0x45c [ 28.354227] __driver_probe_device+0x8c/0x160 [ 28.358578] driver_probe_device+0x44/0xe0 [ 28.362670] __driver_attach+0x124/0x1d0 [ 28.366589] bus_for_each_dev+0x7c/0xe0 [ 28.370426] driver_attach+0x28/0x30 [ 28.373997] bus_add_driver+0x124/0x240 [ 28.377830] driver_register+0x7c/0x124 [ 28.381662] __platform_driver_register+0x2c/0x34 [ 28.386362] npcm_i2c_init+0x3c/0x5c [ 28.389937] do_one_initcall+0x74/0x230 [ 28.393768] kernel_init_freeable+0x24c/0x2b4 [ 28.398126] kernel_init+0x28/0x130 [ 28.401614] ret_from_fork+0x10/0x20 [ 28.405189] Kernel panic - not syncing: softlockup: hung tasks [ 28.411011] SMP: stopping secondary CPUs [ 28.414933] Kernel Offset: disabled [ 28.418412] CPU features: 0x00000000,00000802 [ 28.427644] Rebooting in 20 seconds.. Fixes: 56a1485 ("i2c: npcm7xx: Add Nuvoton NPCM I2C controller driver") Signed-off-by: Tyrone Ting <kfting@nuvoton.com> Cc: <stable@vger.kernel.org> # v5.8+ Reviewed-by: Tali Perry <tali.perry1@gmail.com> Signed-off-by: Andi Shyti <andi.shyti@kernel.org> Link: https://lore.kernel.org/r/20250220040029.27596-2-kfting@nuvoton.com

Commit <d74169ceb0d2> ("iommu/vt-d: Allocate DMAR fault interrupts locally") moved the call to enable_drhd_fault_handling() to a code path that does not hold any lock while traversing the drhd list. Fix it by ensuring the dmar_global_lock lock is held when traversing the drhd list. Without this fix, the following warning is triggered: ============================= WARNING: suspicious RCU usage 6.14.0-rc3 torvalds#55 Not tainted ----------------------------- drivers/iommu/intel/dmar.c:2046 RCU-list traversed in non-reader section!! other info that might help us debug this: rcu_scheduler_active = 1, debug_locks = 1 2 locks held by cpuhp/1/23: #0: ffffffff84a67c50 (cpu_hotplug_lock){++++}-{0:0}, at: cpuhp_thread_fun+0x87/0x2c0 #1: ffffffff84a6a380 (cpuhp_state-up){+.+.}-{0:0}, at: cpuhp_thread_fun+0x87/0x2c0 stack backtrace: CPU: 1 UID: 0 PID: 23 Comm: cpuhp/1 Not tainted 6.14.0-rc3 torvalds#55 Call Trace: <TASK> dump_stack_lvl+0xb7/0xd0 lockdep_rcu_suspicious+0x159/0x1f0 ? __pfx_enable_drhd_fault_handling+0x10/0x10 enable_drhd_fault_handling+0x151/0x180 cpuhp_invoke_callback+0x1df/0x990 cpuhp_thread_fun+0x1ea/0x2c0 smpboot_thread_fn+0x1f5/0x2e0 ? __pfx_smpboot_thread_fn+0x10/0x10 kthread+0x12a/0x2d0 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x4a/0x60 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1a/0x30 </TASK> Holding the lock in enable_drhd_fault_handling() triggers a lockdep splat about a possible deadlock between dmar_global_lock and cpu_hotplug_lock. This is avoided by not holding dmar_global_lock when calling iommu_device_register(), which initiates the device probe process. Fixes: d74169c ("iommu/vt-d: Allocate DMAR fault interrupts locally") Reported-and-tested-by: Ido Schimmel <idosch@nvidia.com> Closes: https://lore.kernel.org/linux-iommu/Zx9OwdLIc_VoQ0-a@shredder.mtl.com/ Tested-by: Breno Leitao <leitao@debian.org> Cc: stable@vger.kernel.org Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Reviewed-by: Kevin Tian <kevin.tian@intel.com> Link: https://lore.kernel.org/r/20250218022422.2315082-1-baolu.lu@linux.intel.com Tested-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>

syzbot is able to crash hosts [1], using llc and devices not supporting IFF_TX_SKB_SHARING. In this case, e1000 driver calls eth_skb_pad(), while the skb is shared. Simply replace skb_get() by skb_clone() in net/llc/llc_s_ac.c Note that e1000 driver might have an issue with pktgen, because it does not clear IFF_TX_SKB_SHARING, this is an orthogonal change. We need to audit other skb_get() uses in net/llc. [1] kernel BUG at net/core/skbuff.c:2178 ! Oops: invalid opcode: 0000 [#1] PREEMPT SMP KASAN NOPTI CPU: 0 UID: 0 PID: 16371 Comm: syz.2.2764 Not tainted 6.14.0-rc4-syzkaller-00052-gac9c34d1e45a #0 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014 RIP: 0010:pskb_expand_head+0x6ce/0x1240 net/core/skbuff.c:2178 Call Trace: <TASK> __skb_pad+0x18a/0x610 net/core/skbuff.c:2466 __skb_put_padto include/linux/skbuff.h:3843 [inline] skb_put_padto include/linux/skbuff.h:3862 [inline] eth_skb_pad include/linux/etherdevice.h:656 [inline] e1000_xmit_frame+0x2d99/0x5800 drivers/net/ethernet/intel/e1000/e1000_main.c:3128 __netdev_start_xmit include/linux/netdevice.h:5151 [inline] netdev_start_xmit include/linux/netdevice.h:5160 [inline] xmit_one net/core/dev.c:3806 [inline] dev_hard_start_xmit+0x9a/0x7b0 net/core/dev.c:3822 sch_direct_xmit+0x1ae/0xc30 net/sched/sch_generic.c:343 __dev_xmit_skb net/core/dev.c:4045 [inline] __dev_queue_xmit+0x13d4/0x43e0 net/core/dev.c:4621 dev_queue_xmit include/linux/netdevice.h:3313 [inline] llc_sap_action_send_test_c+0x268/0x320 net/llc/llc_s_ac.c:144 llc_exec_sap_trans_actions net/llc/llc_sap.c:153 [inline] llc_sap_next_state net/llc/llc_sap.c:182 [inline] llc_sap_state_process+0x239/0x510 net/llc/llc_sap.c:209 llc_ui_sendmsg+0xd0d/0x14e0 net/llc/af_llc.c:993 sock_sendmsg_nosec net/socket.c:718 [inline] Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Reported-by: syzbot+da65c993ae113742a25f@syzkaller.appspotmail.com Closes: https://lore.kernel.org/netdev/67c020c0.050a0220.222324.0011.GAE@google.com/T/#u Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>

Currently kvfree_rcu() APIs use a system workqueue which is "system_unbound_wq" to driver RCU machinery to reclaim a memory. Recently, it has been noted that the following kernel warning can be observed: <snip> workqueue: WQ_MEM_RECLAIM nvme-wq:nvme_scan_work is flushing !WQ_MEM_RECLAIM events_unbound:kfree_rcu_work WARNING: CPU: 21 PID: 330 at kernel/workqueue.c:3719 check_flush_dependency+0x112/0x120 Modules linked in: intel_uncore_frequency(E) intel_uncore_frequency_common(E) skx_edac(E) ... CPU: 21 UID: 0 PID: 330 Comm: kworker/u144:6 Tainted: G E 6.13.2-0_g925d379822da #1 Hardware name: Wiwynn Twin Lakes MP/Twin Lakes Passive MP, BIOS YMM20 02/01/2023 Workqueue: nvme-wq nvme_scan_work RIP: 0010:check_flush_dependency+0x112/0x120 Code: 05 9a 40 14 02 01 48 81 c6 c0 00 00 00 48 8b 50 18 48 81 c7 c0 00 00 00 48 89 f9 48 ... RSP: 0018:ffffc90000df7bd8 EFLAGS: 00010082 RAX: 000000000000006a RBX: ffffffff81622390 RCX: 0000000000000027 RDX: 00000000fffeffff RSI: 000000000057ffa8 RDI: ffff88907f960c88 RBP: 0000000000000000 R08: ffffffff83068e50 R09: 000000000002fffd R10: 0000000000000004 R11: 0000000000000000 R12: ffff8881001a4400 R13: 0000000000000000 R14: ffff88907f420fb8 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffff88907f940000(0000) knlGS:0000000000000000 CR2: 00007f60c3001000 CR3: 000000107d010005 CR4: 00000000007726f0 PKRU: 55555554 Call Trace: <TASK> ? __warn+0xa4/0x140 ? check_flush_dependency+0x112/0x120 ? report_bug+0xe1/0x140 ? check_flush_dependency+0x112/0x120 ? handle_bug+0x5e/0x90 ? exc_invalid_op+0x16/0x40 ? asm_exc_invalid_op+0x16/0x20 ? timer_recalc_next_expiry+0x190/0x190 ? check_flush_dependency+0x112/0x120 ? check_flush_dependency+0x112/0x120 __flush_work.llvm.1643880146586177030+0x174/0x2c0 flush_rcu_work+0x28/0x30 kvfree_rcu_barrier+0x12f/0x160 kmem_cache_destroy+0x18/0x120 bioset_exit+0x10c/0x150 disk_release.llvm.6740012984264378178+0x61/0xd0 device_release+0x4f/0x90 kobject_put+0x95/0x180 nvme_put_ns+0x23/0xc0 nvme_remove_invalid_namespaces+0xb3/0xd0 nvme_scan_work+0x342/0x490 process_scheduled_works+0x1a2/0x370 worker_thread+0x2ff/0x390 ? pwq_release_workfn+0x1e0/0x1e0 kthread+0xb1/0xe0 ? __kthread_parkme+0x70/0x70 ret_from_fork+0x30/0x40 ? __kthread_parkme+0x70/0x70 ret_from_fork_asm+0x11/0x20 </TASK> ---[ end trace 0000000000000000 ]--- <snip> To address this switch to use of independent WQ_MEM_RECLAIM workqueue, so the rules are not violated from workqueue framework point of view. Apart of that, since kvfree_rcu() does reclaim memory it is worth to go with WQ_MEM_RECLAIM type of wq because it is designed for this purpose. Fixes: 6c6c47b ("mm, slab: call kvfree_rcu_barrier() from kmem_cache_destroy()"), Reported-by: Keith Busch <kbusch@kernel.org> Closes: https://lore.kernel.org/all/Z7iqJtCjHKfo8Kho@kbusch-mbp/ Cc: stable@vger.kernel.org Signed-off-by: Uladzislau Rezki (Sony) <urezki@gmail.com> Reviewed-by: Joel Fernandes <joelagnelf@nvidia.com> Signed-off-by: Vlastimil Babka <vbabka@suse.cz>

Use raw_spinlock in order to fix spurious messages about invalid context when spinlock debugging is enabled. The lock is only used to serialize register access. [ 4.239592] ============================= [ 4.239595] [ BUG: Invalid wait context ] [ 4.239599] 6.13.0-rc7-arm64-renesas-05496-gd088502a519f torvalds#35 Not tainted [ 4.239603] ----------------------------- [ 4.239606] kworker/u8:5/76 is trying to lock: [ 4.239609] ffff0000091898a0 (&p->lock){....}-{3:3}, at: gpio_rcar_config_interrupt_input_mode+0x34/0x164 [ 4.239641] other info that might help us debug this: [ 4.239643] context-{5:5} [ 4.239646] 5 locks held by kworker/u8:5/76: [ 4.239651] #0: ffff0000080fb148 ((wq_completion)async){+.+.}-{0:0}, at: process_one_work+0x190/0x62c [ 4.250180] OF: /soc/sound@ec500000/ports/port@0/endpoint: Read of boolean property 'frame-master' with a value. [ 4.254094] #1: ffff80008299bd80 ((work_completion)(&entry->work)){+.+.}-{0:0}, at: process_one_work+0x1b8/0x62c [ 4.254109] #2: ffff00000920c8f8 [ 4.258345] OF: /soc/sound@ec500000/ports/port@1/endpoint: Read of boolean property 'bitclock-master' with a value. [ 4.264803] (&dev->mutex){....}-{4:4}, at: __device_attach_async_helper+0x3c/0xdc [ 4.264820] ChimeraOS#3: ffff00000a50ca40 (request_class#2){+.+.}-{4:4}, at: __setup_irq+0xa0/0x690 [ 4.264840] ChimeraOS#4: [ 4.268872] OF: /soc/sound@ec500000/ports/port@1/endpoint: Read of boolean property 'frame-master' with a value. [ 4.273275] ffff00000a50c8c8 (lock_class){....}-{2:2}, at: __setup_irq+0xc4/0x690 [ 4.296130] renesas_sdhi_internal_dmac ee100000.mmc: mmc1 base at 0x00000000ee100000, max clock rate 200 MHz [ 4.304082] stack backtrace: [ 4.304086] CPU: 1 UID: 0 PID: 76 Comm: kworker/u8:5 Not tainted 6.13.0-rc7-arm64-renesas-05496-gd088502a519f torvalds#35 [ 4.304092] Hardware name: Renesas Salvator-X 2nd version board based on r8a77965 (DT) [ 4.304097] Workqueue: async async_run_entry_fn [ 4.304106] Call trace: [ 4.304110] show_stack+0x14/0x20 (C) [ 4.304122] dump_stack_lvl+0x6c/0x90 [ 4.304131] dump_stack+0x14/0x1c [ 4.304138] __lock_acquire+0xdfc/0x1584 [ 4.426274] lock_acquire+0x1c4/0x33c [ 4.429942] _raw_spin_lock_irqsave+0x5c/0x80 [ 4.434307] gpio_rcar_config_interrupt_input_mode+0x34/0x164 [ 4.440061] gpio_rcar_irq_set_type+0xd4/0xd8 [ 4.444422] __irq_set_trigger+0x5c/0x178 [ 4.448435] __setup_irq+0x2e4/0x690 [ 4.452012] request_threaded_irq+0xc4/0x190 [ 4.456285] devm_request_threaded_irq+0x7c/0xf4 [ 4.459398] ata1: link resume succeeded after 1 retries [ 4.460902] mmc_gpiod_request_cd_irq+0x68/0xe0 [ 4.470660] mmc_start_host+0x50/0xac [ 4.474327] mmc_add_host+0x80/0xe4 [ 4.477817] tmio_mmc_host_probe+0x2b0/0x440 [ 4.482094] renesas_sdhi_probe+0x488/0x6f4 [ 4.486281] renesas_sdhi_internal_dmac_probe+0x60/0x78 [ 4.491509] platform_probe+0x64/0xd8 [ 4.495178] really_probe+0xb8/0x2a8 [ 4.498756] __driver_probe_device+0x74/0x118 [ 4.503116] driver_probe_device+0x3c/0x154 [ 4.507303] __device_attach_driver+0xd4/0x160 [ 4.511750] bus_for_each_drv+0x84/0xe0 [ 4.515588] __device_attach_async_helper+0xb0/0xdc [ 4.520470] async_run_entry_fn+0x30/0xd8 [ 4.524481] process_one_work+0x210/0x62c [ 4.528494] worker_thread+0x1ac/0x340 [ 4.532245] kthread+0x10c/0x110 [ 4.535476] ret_from_fork+0x10/0x20 Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Tested-by: Geert Uytterhoeven <geert+renesas@glider.be> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20250121135833.3769310-1-niklas.soderlund+renesas@ragnatech.se Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>

Currently, we are unnecessarily holding a regulator_ww_class_mutex lock when creating debugfs entries for a newly created regulator. This was brought up as a concern in the discussion in commit cba6cfd ("regulator: core: Avoid lockdep reports when resolving supplies"). This causes the following lockdep splat after executing `ls /sys/kernel/debug` on my platform: ====================================================== WARNING: possible circular locking dependency detected 5.15.167-axis9-devel #1 Tainted: G O ------------------------------------------------------ ls/2146 is trying to acquire lock: ffffff803a562918 (&mm->mmap_lock){++++}-{3:3}, at: __might_fault+0x40/0x88 but task is already holding lock: ffffff80014497f8 (&sb->s_type->i_mutex_key#3){++++}-{3:3}, at: iterate_dir+0x50/0x1f4 which lock already depends on the new lock. [...] Chain exists of: &mm->mmap_lock --> regulator_ww_class_mutex --> &sb->s_type->i_mutex_key#3 Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&sb->s_type->i_mutex_key#3); lock(regulator_ww_class_mutex); lock(&sb->s_type->i_mutex_key#3); lock(&mm->mmap_lock); *** DEADLOCK *** This lock dependency still exists on the latest kernel and using a newer non-tainted kernel would still cause this problem. Fix by moving sysfs symlinking and creation of debugfs entries to after the release of the regulator lock. Fixes: cba6cfd ("regulator: core: Avoid lockdep reports when resolving supplies") Fixes: eaa7995 ("regulator: core: avoid regulator_resolve_supply() race condition") Signed-off-by: Ludvig Pärsson <ludvig.parsson@axis.com> Link: https://patch.msgid.link/20250305-regulator_lockdep_fix-v1-1-ab938b12e790@axis.com Signed-off-by: Mark Brown <broonie@kernel.org>

Commit b15c872 ("hwpoison, memory_hotplug: allow hwpoisoned pages to be offlined) add page poison checks in do_migrate_range in order to make offline hwpoisoned page possible by introducing isolate_lru_page and try_to_unmap for hwpoisoned page. However folio lock must be held before calling try_to_unmap. Add it to fix this problem. Warning will be produced if folio is not locked during unmap: ------------[ cut here ]------------ kernel BUG at ./include/linux/swapops.h:400! Internal error: Oops - BUG: 00000000f2000800 [#1] PREEMPT SMP Modules linked in: CPU: 4 UID: 0 PID: 411 Comm: bash Tainted: G W 6.13.0-rc1-00016-g3c434c7ee82a-dirty torvalds#41 Tainted: [W]=WARN Hardware name: QEMU QEMU Virtual Machine, BIOS 0.0.0 02/06/2015 pstate: 40400005 (nZcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : try_to_unmap_one+0xb08/0xd3c lr : try_to_unmap_one+0x3dc/0xd3c Call trace: try_to_unmap_one+0xb08/0xd3c (P) try_to_unmap_one+0x3dc/0xd3c (L) rmap_walk_anon+0xdc/0x1f8 rmap_walk+0x3c/0x58 try_to_unmap+0x88/0x90 unmap_poisoned_folio+0x30/0xa8 do_migrate_range+0x4a0/0x568 offline_pages+0x5a4/0x670 memory_block_action+0x17c/0x374 memory_subsys_offline+0x3c/0x78 device_offline+0xa4/0xd0 state_store+0x8c/0xf0 dev_attr_store+0x18/0x2c sysfs_kf_write+0x44/0x54 kernfs_fop_write_iter+0x118/0x1a8 vfs_write+0x3a8/0x4bc ksys_write+0x6c/0xf8 __arm64_sys_write+0x1c/0x28 invoke_syscall+0x44/0x100 el0_svc_common.constprop.0+0x40/0xe0 do_el0_svc+0x1c/0x28 el0_svc+0x30/0xd0 el0t_64_sync_handler+0xc8/0xcc el0t_64_sync+0x198/0x19c Code: f9407be0 b5fff320 d4210000 17ffff97 (d4210000) ---[ end trace 0000000000000000 ]--- Link: https://lkml.kernel.org/r/20250217014329.3610326-4-mawupeng1@huawei.com Fixes: b15c872 ("hwpoison, memory_hotplug: allow hwpoisoned pages to be offlined") Signed-off-by: Ma Wupeng <mawupeng1@huawei.com> Acked-by: David Hildenbrand <david@redhat.com> Acked-by: Miaohe Lin <linmiaohe@huawei.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Naoya Horiguchi <nao.horiguchi@gmail.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Add a NULL check on the return value of swp_swap_info in __swap_duplicate to prevent crashes caused by NULL pointer dereference. The reason why swp_swap_info() returns NULL is unclear; it may be due to CPU cache issues or DDR bit flips. The probability of this issue is very small - it has been observed to occur approximately 1 in 500,000 times per week. The stack info we encountered is as follows: Unable to handle kernel NULL pointer dereference at virtual address 0000000000000058 [RB/E]rb_sreason_str_set: sreason_str set null_pointer Mem abort info: ESR = 0x0000000096000005 EC = 0x25: DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 FSC = 0x05: level 1 translation fault Data abort info: ISV = 0, ISS = 0x00000005, ISS2 = 0x00000000 CM = 0, WnR = 0, TnD = 0, TagAccess = 0 GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 user pgtable: 4k pages, 39-bit VAs, pgdp=00000008a80e5000 [0000000000000058] pgd=0000000000000000, p4d=0000000000000000, pud=0000000000000000 Internal error: Oops: 0000000096000005 [#1] PREEMPT SMP Skip md ftrace buffer dump for: 0x1609e0 ... pc : swap_duplicate+0x44/0x164 lr : copy_page_range+0x508/0x1e78 sp : ffffffc0f2a699e0 x29: ffffffc0f2a699e0 x28: ffffff8a5b28d388 x27: ffffff8b06603388 x26: ffffffdf7291fe70 x25: 0000000000000006 x24: 0000000000100073 x23: 00000000002d2d2f x22: 0000000000000008 x21: 0000000000000000 x20: 00000000002d2d2f x19: 18000000002d2d2f x18: ffffffdf726faec0 x17: 0000000000000000 x16: 0010000000000001 x15: 0040000000000001 x14: 0400000000000001 x13: ff7ffffffffffb7f x12: ffeffffffffffbff x11: ffffff8a5c7e1898 x10: 0000000000000018 x9 : 0000000000000006 x8 : 1800000000000000 x7 : 0000000000000000 x6 : ffffff8057c01f10 x5 : 000000000000a318 x4 : 0000000000000000 x3 : 0000000000000000 x2 : 0000006daf200000 x1 : 0000000000000001 x0 : 18000000002d2d2f Call trace: swap_duplicate+0x44/0x164 copy_page_range+0x508/0x1e78 copy_process+0x1278/0x21cc kernel_clone+0x90/0x438 __arm64_sys_clone+0x5c/0x8c invoke_syscall+0x58/0x110 do_el0_svc+0x8c/0xe0 el0_svc+0x38/0x9c el0t_64_sync_handler+0x44/0xec el0t_64_sync+0x1a8/0x1ac Code: 9139c35a 71006f3f 54000568 f8797b55 (f9402ea8) ---[ end trace 0000000000000000 ]--- Kernel panic - not syncing: Oops: Fatal exception SMP: stopping secondary CPUs The patch seems to only provide a workaround, but there are no more effective software solutions to handle the bit flips problem. This path will change the issue from a system crash to a process exception, thereby reducing the impact on the entire machine. akpm: this is probably a kernel bug, but this patch keeps the system running and doesn't reduce that bug's debuggability. Link: https://lkml.kernel.org/r/e223b0e6ba2f4924984b1917cc717bd5@honor.com Signed-off-by: gao xu <gaoxu2@honor.com> Reviewed-by: Barry Song <baohua@kernel.org> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Yosry Ahmed <yosry.ahmed@linux.dev> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

userfaultfd_move() checks whether the PTE entry is present or a swap entry. - If the PTE entry is present, move_present_pte() handles folio migration by setting: src_folio->index = linear_page_index(dst_vma, dst_addr); - If the PTE entry is a swap entry, move_swap_pte() simply copies the PTE to the new dst_addr. This approach is incorrect because, even if the PTE is a swap entry, it can still reference a folio that remains in the swap cache. This creates a race window between steps 2 and 4. 1. add_to_swap: The folio is added to the swapcache. 2. try_to_unmap: PTEs are converted to swap entries. 3. pageout: The folio is written back. 4. Swapcache is cleared. If userfaultfd_move() occurs in the window between steps 2 and 4, after the swap PTE has been moved to the destination, accessing the destination triggers do_swap_page(), which may locate the folio in the swapcache. However, since the folio's index has not been updated to match the destination VMA, do_swap_page() will detect a mismatch. This can result in two critical issues depending on the system configuration. If KSM is disabled, both small and large folios can trigger a BUG during the add_rmap operation due to: page_pgoff(folio, page) != linear_page_index(vma, address) [ 13.336953] page: refcount:6 mapcount:1 mapping:00000000f43db19c index:0xffffaf150 pfn:0x4667c [ 13.337520] head: order:2 mapcount:1 entire_mapcount:0 nr_pages_mapped:1 pincount:0 [ 13.337716] memcg:ffff00000405f000 [ 13.337849] anon flags: 0x3fffc0000020459(locked|uptodate|dirty|owner_priv_1|head|swapbacked|node=0|zone=0|lastcpupid=0xffff) [ 13.338630] raw: 03fffc0000020459 ffff80008507b538 ffff80008507b538 ffff000006260361 [ 13.338831] raw: 0000000ffffaf150 0000000000004000 0000000600000000 ffff00000405f000 [ 13.339031] head: 03fffc0000020459 ffff80008507b538 ffff80008507b538 ffff000006260361 [ 13.339204] head: 0000000ffffaf150 0000000000004000 0000000600000000 ffff00000405f000 [ 13.339375] head: 03fffc0000000202 fffffdffc0199f01 ffffffff00000000 0000000000000001 [ 13.339546] head: 0000000000000004 0000000000000000 00000000ffffffff 0000000000000000 [ 13.339736] page dumped because: VM_BUG_ON_PAGE(page_pgoff(folio, page) != linear_page_index(vma, address)) [ 13.340190] ------------[ cut here ]------------ [ 13.340316] kernel BUG at mm/rmap.c:1380! [ 13.340683] Internal error: Oops - BUG: 00000000f2000800 [#1] PREEMPT SMP [ 13.340969] Modules linked in: [ 13.341257] CPU: 1 UID: 0 PID: 107 Comm: a.out Not tainted 6.14.0-rc3-gcf42737e247a-dirty torvalds#299 [ 13.341470] Hardware name: linux,dummy-virt (DT) [ 13.341671] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 13.341815] pc : __page_check_anon_rmap+0xa0/0xb0 [ 13.341920] lr : __page_check_anon_rmap+0xa0/0xb0 [ 13.342018] sp : ffff80008752bb20 [ 13.342093] x29: ffff80008752bb20 x28: fffffdffc0199f00 x27: 0000000000000001 [ 13.342404] x26: 0000000000000000 x25: 0000000000000001 x24: 0000000000000001 [ 13.342575] x23: 0000ffffaf0d0000 x22: 0000ffffaf0d0000 x21: fffffdffc0199f00 [ 13.342731] x20: fffffdffc0199f00 x19: ffff000006210700 x18: 00000000ffffffff [ 13.342881] x17: 6c203d2120296567 x16: 6170202c6f696c6f x15: 662866666f67705f [ 13.343033] x14: 6567617028454741 x13: 2929737365726464 x12: ffff800083728ab0 [ 13.343183] x11: ffff800082996bf8 x10: 0000000000000fd7 x9 : ffff80008011bc40 [ 13.343351] x8 : 0000000000017fe8 x7 : 00000000fffff000 x6 : ffff8000829eebf8 [ 13.343498] x5 : c0000000fffff000 x4 : 0000000000000000 x3 : 0000000000000000 [ 13.343645] x2 : 0000000000000000 x1 : ffff0000062db980 x0 : 000000000000005f [ 13.343876] Call trace: [ 13.344045] __page_check_anon_rmap+0xa0/0xb0 (P) [ 13.344234] folio_add_anon_rmap_ptes+0x22c/0x320 [ 13.344333] do_swap_page+0x1060/0x1400 [ 13.344417] __handle_mm_fault+0x61c/0xbc8 [ 13.344504] handle_mm_fault+0xd8/0x2e8 [ 13.344586] do_page_fault+0x20c/0x770 [ 13.344673] do_translation_fault+0xb4/0xf0 [ 13.344759] do_mem_abort+0x48/0xa0 [ 13.344842] el0_da+0x58/0x130 [ 13.344914] el0t_64_sync_handler+0xc4/0x138 [ 13.345002] el0t_64_sync+0x1ac/0x1b0 [ 13.345208] Code: aa1503e0 f000f801 910f6021 97ff5779 (d4210000) [ 13.345504] ---[ end trace 0000000000000000 ]--- [ 13.345715] note: a.out[107] exited with irqs disabled [ 13.345954] note: a.out[107] exited with preempt_count 2 If KSM is enabled, Peter Xu also discovered that do_swap_page() may trigger an unexpected CoW operation for small folios because ksm_might_need_to_copy() allocates a new folio when the folio index does not match linear_page_index(vma, addr). This patch also checks the swapcache when handling swap entries. If a match is found in the swapcache, it processes it similarly to a present PTE. However, there are some differences. For example, the folio is no longer exclusive because folio_try_share_anon_rmap_pte() is performed during unmapping. Furthermore, in the case of swapcache, the folio has already been unmapped, eliminating the risk of concurrent rmap walks and removing the need to acquire src_folio's anon_vma or lock. Note that for large folios, in the swapcache handling path, we directly return -EBUSY since split_folio() will return -EBUSY regardless if the folio is under writeback or unmapped. This is not an urgent issue, so a follow-up patch may address it separately. [v-songbaohua@oppo.com: minor cleanup according to Peter Xu] Link: https://lkml.kernel.org/r/20250226024411.47092-1-21cnbao@gmail.com Link: https://lkml.kernel.org/r/20250226001400.9129-1-21cnbao@gmail.com Fixes: adef440 ("userfaultfd: UFFDIO_MOVE uABI") Signed-off-by: Barry Song <v-songbaohua@oppo.com> Acked-by: Peter Xu <peterx@redhat.com> Reviewed-by: Suren Baghdasaryan <surenb@google.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Axel Rasmussen <axelrasmussen@google.com> Cc: Brian Geffon <bgeffon@google.com> Cc: Christian Brauner <brauner@kernel.org> Cc: David Hildenbrand <david@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jann Horn <jannh@google.com> Cc: Kalesh Singh <kaleshsingh@google.com> Cc: Liam R. Howlett <Liam.Howlett@oracle.com> Cc: Lokesh Gidra <lokeshgidra@google.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Mike Rapoport (IBM) <rppt@kernel.org> Cc: Nicolas Geoffray <ngeoffray@google.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: Shuah Khan <shuah@kernel.org> Cc: ZhangPeng <zhangpeng362@huawei.com> Cc: Tangquan Zheng <zhengtangquan@oppo.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

…cal section A circular lock dependency splat has been seen involving down_trylock(): ====================================================== WARNING: possible circular locking dependency detected 6.12.0-41.el10.s390x+debug ------------------------------------------------------ dd/32479 is trying to acquire lock: 0015a20accd0d4f8 ((console_sem).lock){-.-.}-{2:2}, at: down_trylock+0x26/0x90 but task is already holding lock: 000000017e461698 (&zone->lock){-.-.}-{2:2}, at: rmqueue_bulk+0xac/0x8f0 the existing dependency chain (in reverse order) is: -> ChimeraOS#4 (&zone->lock){-.-.}-{2:2}: -> ChimeraOS#3 (hrtimer_bases.lock){-.-.}-{2:2}: -> #2 (&rq->__lock){-.-.}-{2:2}: -> #1 (&p->pi_lock){-.-.}-{2:2}: -> #0 ((console_sem).lock){-.-.}-{2:2}: The console_sem -> pi_lock dependency is due to calling try_to_wake_up() while holding the console_sem raw_spinlock. This dependency can be broken by using wake_q to do the wakeup instead of calling try_to_wake_up() under the console_sem lock. This will also make the semaphore's raw_spinlock become a terminal lock without taking any further locks underneath it. The hrtimer_bases.lock is a raw_spinlock while zone->lock is a spinlock. The hrtimer_bases.lock -> zone->lock dependency happens via the debug_objects_fill_pool() helper function in the debugobjects code. -> ChimeraOS#4 (&zone->lock){-.-.}-{2:2}: __lock_acquire+0xe86/0x1cc0 lock_acquire.part.0+0x258/0x630 lock_acquire+0xb8/0xe0 _raw_spin_lock_irqsave+0xb4/0x120 rmqueue_bulk+0xac/0x8f0 __rmqueue_pcplist+0x580/0x830 rmqueue_pcplist+0xfc/0x470 rmqueue.isra.0+0xdec/0x11b0 get_page_from_freelist+0x2ee/0xeb0 __alloc_pages_noprof+0x2c2/0x520 alloc_pages_mpol_noprof+0x1fc/0x4d0 alloc_pages_noprof+0x8c/0xe0 allocate_slab+0x320/0x460 ___slab_alloc+0xa58/0x12b0 __slab_alloc.isra.0+0x42/0x60 kmem_cache_alloc_noprof+0x304/0x350 fill_pool+0xf6/0x450 debug_object_activate+0xfe/0x360 enqueue_hrtimer+0x34/0x190 __run_hrtimer+0x3c8/0x4c0 __hrtimer_run_queues+0x1b2/0x260 hrtimer_interrupt+0x316/0x760 do_IRQ+0x9a/0xe0 do_irq_async+0xf6/0x160 Normally a raw_spinlock to spinlock dependency is not legitimate and will be warned if CONFIG_PROVE_RAW_LOCK_NESTING is enabled, but debug_objects_fill_pool() is an exception as it explicitly allows this dependency for non-PREEMPT_RT kernel without causing PROVE_RAW_LOCK_NESTING lockdep splat. As a result, this dependency is legitimate and not a bug. Anyway, semaphore is the only locking primitive left that is still using try_to_wake_up() to do wakeup inside critical section, all the other locking primitives had been migrated to use wake_q to do wakeup outside of the critical section. It is also possible that there are other circular locking dependencies involving printk/console_sem or other existing/new semaphores lurking somewhere which may show up in the future. Let just do the migration now to wake_q to avoid headache like this. Reported-by: yzbot+ed801a886dfdbfe7136d@syzkaller.appspotmail.com Signed-off-by: Waiman Long <longman@redhat.com> Signed-off-by: Boqun Feng <boqun.feng@gmail.com> Signed-off-by: Ingo Molnar <mingo@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Link: https://lore.kernel.org/r/20250307232717.1759087-3-boqun.feng@gmail.com

With ltp test case "testcases/bin/hugefork02", there is a dmesg error report message such as: kernel BUG at mm/hugetlb.c:5550! Oops - BUG[#1]: CPU: 0 UID: 0 PID: 1517 Comm: hugefork02 Not tainted 6.14.0-rc2+ torvalds#241 Hardware name: QEMU QEMU Virtual Machine, BIOS unknown 2/2/2022 pc 90000000004eaf1c ra 9000000000485538 tp 900000010edbc000 sp 900000010edbf940 a0 900000010edbfb00 a1 9000000108d20280 a2 00007fffe9474000 a3 00007ffff3474000 a4 0000000000000000 a5 0000000000000003 a6 00000000003cadd3 a7 0000000000000000 t0 0000000001ffffff t1 0000000001474000 t2 900000010ecd7900 t3 00007fffe9474000 t4 00007fffe9474000 t5 0000000000000040 t6 900000010edbfb00 t7 0000000000000001 t8 0000000000000005 u0 90000000004849d0 s9 900000010edbfa00 s0 9000000108d20280 s1 00007fffe9474000 s2 0000000002000000 s3 9000000108d20280 s4 9000000002b38b10 s5 900000010edbfb00 s6 00007ffff3474000 s7 0000000000000406 s8 900000010edbfa08 ra: 9000000000485538 unmap_vmas+0x130/0x218 ERA: 90000000004eaf1c __unmap_hugepage_range+0x6f4/0x7d0 PRMD: 00000004 (PPLV0 +PIE -PWE) EUEN: 00000007 (+FPE +SXE +ASXE -BTE) ECFG: 00071c1d (LIE=0,2-4,10-12 VS=7) ESTAT: 000c0000 [BRK] (IS= ECode=12 EsubCode=0) PRID: 0014c010 (Loongson-64bit, Loongson-3A5000) Process hugefork02 (pid: 1517, threadinfo=00000000a670eaf4, task=000000007a95fc64) Call Trace: [<90000000004eaf1c>] __unmap_hugepage_range+0x6f4/0x7d0 [<9000000000485534>] unmap_vmas+0x12c/0x218 [<9000000000494068>] exit_mmap+0xe0/0x308 [<900000000025fdc4>] mmput+0x74/0x180 [<900000000026a284>] do_exit+0x294/0x898 [<900000000026aa30>] do_group_exit+0x30/0x98 [<900000000027bed4>] get_signal+0x83c/0x868 [<90000000002457b4>] arch_do_signal_or_restart+0x54/0xfa0 [<90000000015795e8>] irqentry_exit_to_user_mode+0xb8/0x138 [<90000000002572d0>] tlb_do_page_fault_1+0x114/0x1b4 The problem is that base address allocated from hugetlbfs is not aligned with pmd size. Here add a checking for hugetlbfs and align base address with pmd size. After this patch the test case "testcases/bin/hugefork02" passes to run. This is similar to the commit 7f24cbc ("mm/mmap: teach generic_get_unmapped_area{_topdown} to handle hugetlb mappings"). Cc: stable@vger.kernel.org # 6.13+ Signed-off-by: Bibo Mao <maobibo@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>

The bnxt_queue_mem_alloc() is called to allocate new queue memory when a queue is restarted. It internally accesses rx buffer descriptor corresponding to the index. The rx buffer descriptor is allocated and set when the interface is up and it's freed when the interface is down. So, if queue is restarted if interface is down, kernel panic occurs. Splat looks like: BUG: unable to handle page fault for address: 000000000000b240 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: Oops: 0000 [#1] PREEMPT SMP NOPTI CPU: 3 UID: 0 PID: 1563 Comm: ncdevmem2 Not tainted 6.14.0-rc2+ ChimeraOS#9 844ddba6e7c459cafd0bf4db9a3198e Hardware name: ASUS System Product Name/PRIME Z690-P D4, BIOS 0603 11/01/2021 RIP: 0010:bnxt_queue_mem_alloc+0x3f/0x4e0 [bnxt_en] Code: 41 54 4d 89 c4 4d 69 c0 c0 05 00 00 55 48 89 f5 53 48 89 fb 4c 8d b5 40 05 00 00 48 83 ec 15 RSP: 0018:ffff9dcc83fef9e8 EFLAGS: 00010202 RAX: ffffffffc0457720 RBX: ffff934ed8d40000 RCX: 0000000000000000 RDX: 000000000000001f RSI: ffff934ea508f800 RDI: ffff934ea508f808 RBP: ffff934ea508f800 R08: 000000000000b240 R09: ffff934e84f4b000 R10: ffff9dcc83fefa30 R11: ffff934e84f4b000 R12: 000000000000001f R13: ffff934ed8d40ac0 R14: ffff934ea508fd40 R15: ffff934e84f4b000 FS: 00007fa73888c740(0000) GS:ffff93559f780000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000000000000b240 CR3: 0000000145a2e000 CR4: 00000000007506f0 PKRU: 55555554 Call Trace: <TASK> ? __die+0x20/0x70 ? page_fault_oops+0x15a/0x460 ? exc_page_fault+0x6e/0x180 ? asm_exc_page_fault+0x22/0x30 ? __pfx_bnxt_queue_mem_alloc+0x10/0x10 [bnxt_en 7f85e76f4d724ba07471d7e39d9e773aea6597b7] ? bnxt_queue_mem_alloc+0x3f/0x4e0 [bnxt_en 7f85e76f4d724ba07471d7e39d9e773aea6597b7] netdev_rx_queue_restart+0xc5/0x240 net_devmem_bind_dmabuf_to_queue+0xf8/0x200 netdev_nl_bind_rx_doit+0x3a7/0x450 genl_family_rcv_msg_doit+0xd9/0x130 genl_rcv_msg+0x184/0x2b0 ? __pfx_netdev_nl_bind_rx_doit+0x10/0x10 ? __pfx_genl_rcv_msg+0x10/0x10 netlink_rcv_skb+0x54/0x100 genl_rcv+0x24/0x40 ... Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com> Reviewed-by: Jakub Kicinski <kuba@kernel.org> Fixes: 2d694c2 ("bnxt_en: implement netdev_queue_mgmt_ops") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Reviewed-by: Mina Almasry <almasrymina@google.com> Link: https://patch.msgid.link/20250309134219.91670-3-ap420073@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>

When qstats-get operation is executed, callbacks of netdev_stats_ops are called. The bnxt_get_queue_stats{rx | tx} collect per-queue stats from sw_stats in the rings. But {rx | tx | cp}_ring are allocated when the interface is up. So, these rings are not allocated when the interface is down. The qstats-get is allowed even if the interface is down. However, the bnxt_get_queue_stats{rx | tx}() accesses cp_ring and tx_ring without null check. So, it needs to avoid accessing rings if the interface is down. Reproducer: ip link set $interface down ./cli.py --spec netdev.yaml --dump qstats-get OR ip link set $interface down python ./stats.py Splat looks like: BUG: kernel NULL pointer dereference, address: 0000000000000000 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 1680fa067 P4D 1680fa067 PUD 16be3b067 PMD 0 Oops: Oops: 0000 [#1] PREEMPT SMP NOPTI CPU: 0 UID: 0 PID: 1495 Comm: python3 Not tainted 6.14.0-rc4+ torvalds#32 5cd0f999d5a15c574ac72b3e4b907341 Hardware name: ASUS System Product Name/PRIME Z690-P D4, BIOS 0603 11/01/2021 RIP: 0010:bnxt_get_queue_stats_rx+0xf/0x70 [bnxt_en] Code: c6 87 b5 18 00 00 02 eb a2 66 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 0f 1f 44 01 RSP: 0018:ffffabef43cdb7e0 EFLAGS: 00010282 RAX: 0000000000000000 RBX: ffffffffc04c8710 RCX: 0000000000000000 RDX: ffffabef43cdb858 RSI: 0000000000000000 RDI: ffff8d504e850000 RBP: ffff8d506c9f9c00 R08: 0000000000000004 R09: ffff8d506bcd901c R10: 0000000000000015 R11: ffff8d506bcd9000 R12: 0000000000000000 R13: ffffabef43cdb8c0 R14: ffff8d504e850000 R15: 0000000000000000 FS: 00007f2c5462b080(0000) GS:ffff8d575f600000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 0000000167fd0000 CR4: 00000000007506f0 PKRU: 55555554 Call Trace: <TASK> ? __die+0x20/0x70 ? page_fault_oops+0x15a/0x460 ? sched_balance_find_src_group+0x58d/0xd10 ? exc_page_fault+0x6e/0x180 ? asm_exc_page_fault+0x22/0x30 ? bnxt_get_queue_stats_rx+0xf/0x70 [bnxt_en cdd546fd48563c280cfd30e9647efa420db07bf1] netdev_nl_stats_by_netdev+0x2b1/0x4e0 ? xas_load+0x9/0xb0 ? xas_find+0x183/0x1d0 ? xa_find+0x8b/0xe0 netdev_nl_qstats_get_dumpit+0xbf/0x1e0 genl_dumpit+0x31/0x90 netlink_dump+0x1a8/0x360 Fixes: af7b3b4 ("eth: bnxt: support per-queue statistics") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com> Link: https://patch.msgid.link/20250309134219.91670-6-ap420073@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>

A blocking notification chain uses a read-write semaphore to protect the integrity of the chain. The semaphore is acquired for writing when adding / removing notifiers to / from the chain and acquired for reading when traversing the chain and informing notifiers about an event. In case of the blocking switchdev notification chain, recursive notifications are possible which leads to the semaphore being acquired twice for reading and to lockdep warnings being generated [1]. Specifically, this can happen when the bridge driver processes a SWITCHDEV_BRPORT_UNOFFLOADED event which causes it to emit notifications about deferred events when calling switchdev_deferred_process(). Fix this by converting the notification chain to a raw notification chain in a similar fashion to the netdev notification chain. Protect the chain using the RTNL mutex by acquiring it when modifying the chain. Events are always informed under the RTNL mutex, but add an assertion in call_switchdev_blocking_notifiers() to make sure this is not violated in the future. Maintain the "blocking" prefix as events are always emitted from process context and listeners are allowed to block. [1]: WARNING: possible recursive locking detected 6.14.0-rc4-custom-g079270089484 #1 Not tainted -------------------------------------------- ip/52731 is trying to acquire lock: ffffffff850918d8 ((switchdev_blocking_notif_chain).rwsem){++++}-{4:4}, at: blocking_notifier_call_chain+0x58/0xa0 but task is already holding lock: ffffffff850918d8 ((switchdev_blocking_notif_chain).rwsem){++++}-{4:4}, at: blocking_notifier_call_chain+0x58/0xa0 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock((switchdev_blocking_notif_chain).rwsem); lock((switchdev_blocking_notif_chain).rwsem); *** DEADLOCK *** May be due to missing lock nesting notation 3 locks held by ip/52731: #0: ffffffff84f795b0 (rtnl_mutex){+.+.}-{4:4}, at: rtnl_newlink+0x727/0x1dc0 #1: ffffffff8731f628 (&net->rtnl_mutex){+.+.}-{4:4}, at: rtnl_newlink+0x790/0x1dc0 #2: ffffffff850918d8 ((switchdev_blocking_notif_chain).rwsem){++++}-{4:4}, at: blocking_notifier_call_chain+0x58/0xa0 stack backtrace: ... ? __pfx_down_read+0x10/0x10 ? __pfx_mark_lock+0x10/0x10 ? __pfx_switchdev_port_attr_set_deferred+0x10/0x10 blocking_notifier_call_chain+0x58/0xa0 switchdev_port_attr_notify.constprop.0+0xb3/0x1b0 ? __pfx_switchdev_port_attr_notify.constprop.0+0x10/0x10 ? mark_held_locks+0x94/0xe0 ? switchdev_deferred_process+0x11a/0x340 switchdev_port_attr_set_deferred+0x27/0xd0 switchdev_deferred_process+0x164/0x340 br_switchdev_port_unoffload+0xc8/0x100 [bridge] br_switchdev_blocking_event+0x29f/0x580 [bridge] notifier_call_chain+0xa2/0x440 blocking_notifier_call_chain+0x6e/0xa0 switchdev_bridge_port_unoffload+0xde/0x1a0 ... Fixes: f7a70d6 ("net: bridge: switchdev: Ensure deferred event delivery on unoffload") Signed-off-by: Amit Cohen <amcohen@nvidia.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Simon Horman <horms@kernel.org> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Tested-by: Vladimir Oltean <olteanv@gmail.com> Link: https://patch.msgid.link/20250305121509.631207-1-amcohen@nvidia.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>

We were still using the trans after the unlock, leading to this bug in the retry path: 00255 ------------[ cut here ]------------ 00255 kernel BUG at fs/bcachefs/btree_iter.c:3348! 00255 Internal error: Oops - BUG: 00000000f2000800 [#1] SMP 00255 bcachefs (0ca38fe8-0a26-41f9-9b5d-6a27796c7803): /fiotest offset 86048768: no device to read from: 00255 u64s 8 type extent 4098:168192:U32_MAX len 128 ver 0: durability: 0 crc: c_size 128 size 128 offset 0 nonce 0 csum crc32c 0:8040a368 compress none ec: idx 83 block 1 ptr: 0:302:128 gen 0 00255 bcachefs (0ca38fe8-0a26-41f9-9b5d-6a27796c7803): /fiotest offset 85983232: no device to read from: 00255 u64s 8 type extent 4098:168064:U32_MAX len 128 ver 0: durability: 0 crc: c_size 128 size 128 offset 0 nonce 0 csum crc32c 0:43311336 compress none ec: idx 83 block 1 ptr: 0:302:0 gen 0 00255 Modules linked in: 00255 CPU: 5 UID: 0 PID: 304 Comm: kworker/u70:2 Not tainted 6.14.0-rc6-ktest-g526aae23d67d #16040 00255 Hardware name: linux,dummy-virt (DT) 00255 Workqueue: events_unbound bch2_rbio_retry 00255 pstate: 60001005 (nZCv daif -PAN -UAO -TCO -DIT +SSBS BTYPE=--) 00255 pc : __bch2_trans_get+0x100/0x378 00255 lr : __bch2_trans_get+0xa0/0x378 00255 sp : ffffff80c865b760 00255 x29: ffffff80c865b760 x28: 0000000000000000 x27: ffffff80d76ed880 00255 x26: 0000000000000018 x25: 0000000000000000 x24: ffffff80f4ec3760 00255 x23: ffffff80f4010140 x22: 0000000000000056 x21: ffffff80f4ec0000 00255 x20: ffffff80f4ec3788 x19: ffffff80d75f8000 x18: 00000000ffffffff 00255 x17: 2065707974203820 x16: 7334367520200a3a x15: 0000000000000008 00255 x14: 0000000000000001 x13: 0000000000000100 x12: 0000000000000006 00255 x11: ffffffc080b47a40 x10: 0000000000000000 x9 : ffffffc08038dea8 00255 x8 : ffffff80d75fc018 x7 : 0000000000000000 x6 : 0000000000003788 00255 x5 : 0000000000003760 x4 : ffffff80c922de80 x3 : ffffff80f18f0000 00255 x2 : ffffff80c922de80 x1 : 0000000000000130 x0 : 0000000000000006 00255 Call trace: 00255 __bch2_trans_get+0x100/0x378 (P) 00255 bch2_read_io_err+0x98/0x260 00255 bch2_read_endio+0xb8/0x2d0 00255 __bch2_read_extent+0xce8/0xfe0 00255 __bch2_read+0x2a8/0x978 00255 bch2_rbio_retry+0x188/0x318 00255 process_one_work+0x154/0x390 00255 worker_thread+0x20c/0x3b8 00255 kthread+0xf0/0x1b0 00255 ret_from_fork+0x10/0x20 00255 Code: 6b01001f 54ffff01 79408460 3617fec0 (d4210000) 00255 ---[ end trace 0000000000000000 ]--- 00255 Kernel panic - not syncing: Oops - BUG: Fatal exception 00255 SMP: stopping secondary CPUs 00255 Kernel Offset: disabled 00255 CPU features: 0x000,00000070,00000010,8240500b 00255 Memory Limit: none 00255 ---[ end Kernel panic - not syncing: Oops - BUG: Fatal exception ]--- Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

When removing LAG device from bridge, NETDEV_CHANGEUPPER event is triggered. Driver finds the lower devices (PFs) to flush all the offloaded entries. And mlx5_lag_is_shared_fdb is checked, it returns false if one of PF is unloaded. In such case, mlx5_esw_bridge_lag_rep_get() and its caller return NULL, instead of the alive PF, and the flush is skipped. Besides, the bridge fdb entry's lastuse is updated in mlx5 bridge event handler. But this SWITCHDEV_FDB_ADD_TO_BRIDGE event can be ignored in this case because the upper interface for bond is deleted, and the entry will never be aged because lastuse is never updated. To make things worse, as the entry is alive, mlx5 bridge workqueue keeps sending that event, which is then handled by kernel bridge notifier. It causes the following crash when accessing the passed bond netdev which is already destroyed. To fix this issue, remove such checks. LAG state is already checked in commit 15f8f16 ("net/mlx5: Bridge, verify LAG state when adding bond to bridge"), driver still need to skip offload if LAG becomes invalid state after initialization. Oops: stack segment: 0000 [#1] SMP CPU: 3 UID: 0 PID: 23695 Comm: kworker/u40:3 Tainted: G OE 6.11.0_mlnx #1 Tainted: [O]=OOT_MODULE, [E]=UNSIGNED_MODULE Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 Workqueue: mlx5_bridge_wq mlx5_esw_bridge_update_work [mlx5_core] RIP: 0010:br_switchdev_event+0x2c/0x110 [bridge] Code: 44 00 00 48 8b 02 48 f7 00 00 02 00 00 74 69 41 54 55 53 48 83 ec 08 48 8b a8 08 01 00 00 48 85 ed 74 4a 48 83 fe 02 48 89 d3 <4c> 8b 65 00 74 23 76 49 48 83 fe 05 74 7e 48 83 fe 06 75 2f 0f b7 RSP: 0018:ffffc900092cfda0 EFLAGS: 00010297 RAX: ffff888123bfe000 RBX: ffffc900092cfe08 RCX: 00000000ffffffff RDX: ffffc900092cfe08 RSI: 0000000000000001 RDI: ffffffffa0c585f0 RBP: 6669746f6e690a30 R08: 0000000000000000 R09: ffff888123ae92c8 R10: 0000000000000000 R11: fefefefefefefeff R12: ffff888123ae9c60 R13: 0000000000000001 R14: ffffc900092cfe08 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffff88852c980000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f15914c8734 CR3: 0000000002830005 CR4: 0000000000770ef0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: <TASK> ? __die_body+0x1a/0x60 ? die+0x38/0x60 ? do_trap+0x10b/0x120 ? do_error_trap+0x64/0xa0 ? exc_stack_segment+0x33/0x50 ? asm_exc_stack_segment+0x22/0x30 ? br_switchdev_event+0x2c/0x110 [bridge] ? sched_balance_newidle.isra.149+0x248/0x390 notifier_call_chain+0x4b/0xa0 atomic_notifier_call_chain+0x16/0x20 mlx5_esw_bridge_update+0xec/0x170 [mlx5_core] mlx5_esw_bridge_update_work+0x19/0x40 [mlx5_core] process_scheduled_works+0x81/0x390 worker_thread+0x106/0x250 ? bh_worker+0x110/0x110 kthread+0xb7/0xe0 ? kthread_park+0x80/0x80 ret_from_fork+0x2d/0x50 ? kthread_park+0x80/0x80 ret_from_fork_asm+0x11/0x20 </TASK> Fixes: ff9b752 ("net/mlx5: Bridge, support LAG") Signed-off-by: Jianbo Liu <jianbol@nvidia.com> Reviewed-by: Vlad Buslov <vladbu@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Link: https://patch.msgid.link/1741644104-97767-6-git-send-email-tariqt@nvidia.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>

When on a MANA VM hibernation is triggered, as part of hibernate_snapshot(), mana_gd_suspend() and mana_gd_resume() are called. If during this mana_gd_resume(), a failure occurs with HWC creation, mana_port_debugfs pointer does not get reinitialized and ends up pointing to older, cleaned-up dentry. Further in the hibernation path, as part of power_down(), mana_gd_shutdown() is triggered. This call, unaware of the failures in resume, tries to cleanup the already cleaned up mana_port_debugfs value and hits the following bug: [ 191.359296] mana 7870:00:00.0: Shutdown was called [ 191.359918] BUG: kernel NULL pointer dereference, address: 0000000000000098 [ 191.360584] #PF: supervisor write access in kernel mode [ 191.361125] #PF: error_code(0x0002) - not-present page [ 191.361727] PGD 1080ea067 P4D 0 [ 191.362172] Oops: Oops: 0002 [#1] SMP NOPTI [ 191.362606] CPU: 11 UID: 0 PID: 1674 Comm: bash Not tainted 6.14.0-rc5+ #2 [ 191.363292] Hardware name: Microsoft Corporation Virtual Machine/Virtual Machine, BIOS Hyper-V UEFI Release v4.1 11/21/2024 [ 191.364124] RIP: 0010:down_write+0x19/0x50 [ 191.364537] Code: 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 0f 1f 44 00 00 55 48 89 e5 53 48 89 fb e8 de cd ff ff 31 c0 ba 01 00 00 00 <f0> 48 0f b1 13 75 16 65 48 8b 05 88 24 4c 6a 48 89 43 08 48 8b 5d [ 191.365867] RSP: 0000:ff45fbe0c1c037b8 EFLAGS: 00010246 [ 191.366350] RAX: 0000000000000000 RBX: 0000000000000098 RCX: ffffff8100000000 [ 191.366951] RDX: 0000000000000001 RSI: 0000000000000064 RDI: 0000000000000098 [ 191.367600] RBP: ff45fbe0c1c037c0 R08: 0000000000000000 R09: 0000000000000001 [ 191.368225] R10: ff45fbe0d2b01000 R11: 0000000000000008 R12: 0000000000000000 [ 191.368874] R13: 000000000000000b R14: ff43dc27509d67c0 R15: 0000000000000020 [ 191.369549] FS: 00007dbc5001e740(0000) GS:ff43dc663f380000(0000) knlGS:0000000000000000 [ 191.370213] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 191.370830] CR2: 0000000000000098 CR3: 0000000168e8e002 CR4: 0000000000b73ef0 [ 191.371557] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 191.372192] DR3: 0000000000000000 DR6: 00000000fffe07f0 DR7: 0000000000000400 [ 191.372906] Call Trace: [ 191.373262] <TASK> [ 191.373621] ? show_regs+0x64/0x70 [ 191.374040] ? __die+0x24/0x70 [ 191.374468] ? page_fault_oops+0x290/0x5b0 [ 191.374875] ? do_user_addr_fault+0x448/0x800 [ 191.375357] ? exc_page_fault+0x7a/0x160 [ 191.375971] ? asm_exc_page_fault+0x27/0x30 [ 191.376416] ? down_write+0x19/0x50 [ 191.376832] ? down_write+0x12/0x50 [ 191.377232] simple_recursive_removal+0x4a/0x2a0 [ 191.377679] ? __pfx_remove_one+0x10/0x10 [ 191.378088] debugfs_remove+0x44/0x70 [ 191.378530] mana_detach+0x17c/0x4f0 [ 191.378950] ? __flush_work+0x1e2/0x3b0 [ 191.379362] ? __cond_resched+0x1a/0x50 [ 191.379787] mana_remove+0xf2/0x1a0 [ 191.380193] mana_gd_shutdown+0x3b/0x70 [ 191.380642] pci_device_shutdown+0x3a/0x80 [ 191.381063] device_shutdown+0x13e/0x230 [ 191.381480] kernel_power_off+0x35/0x80 [ 191.381890] hibernate+0x3c6/0x470 [ 191.382312] state_store+0xcb/0xd0 [ 191.382734] kobj_attr_store+0x12/0x30 [ 191.383211] sysfs_kf_write+0x3e/0x50 [ 191.383640] kernfs_fop_write_iter+0x140/0x1d0 [ 191.384106] vfs_write+0x271/0x440 [ 191.384521] ksys_write+0x72/0xf0 [ 191.384924] __x64_sys_write+0x19/0x20 [ 191.385313] x64_sys_call+0x2b0/0x20b0 [ 191.385736] do_syscall_64+0x79/0x150 [ 191.386146] ? __mod_memcg_lruvec_state+0xe7/0x240 [ 191.386676] ? __lruvec_stat_mod_folio+0x79/0xb0 [ 191.387124] ? __pfx_lru_add+0x10/0x10 [ 191.387515] ? queued_spin_unlock+0x9/0x10 [ 191.387937] ? do_anonymous_page+0x33c/0xa00 [ 191.388374] ? __handle_mm_fault+0xcf3/0x1210 [ 191.388805] ? __count_memcg_events+0xbe/0x180 [ 191.389235] ? handle_mm_fault+0xae/0x300 [ 191.389588] ? do_user_addr_fault+0x559/0x800 [ 191.390027] ? irqentry_exit_to_user_mode+0x43/0x230 [ 191.390525] ? irqentry_exit+0x1d/0x30 [ 191.390879] ? exc_page_fault+0x86/0x160 [ 191.391235] entry_SYSCALL_64_after_hwframe+0x76/0x7e [ 191.391745] RIP: 0033:0x7dbc4ff1c574 [ 191.392111] Code: c7 00 16 00 00 00 b8 ff ff ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 f3 0f 1e fa 80 3d d5 ea 0e 00 00 74 13 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 54 c3 0f 1f 00 55 48 89 e5 48 83 ec 20 48 89 [ 191.393412] RSP: 002b:00007ffd95a23ab8 EFLAGS: 00000202 ORIG_RAX: 0000000000000001 [ 191.393990] RAX: ffffffffffffffda RBX: 0000000000000005 RCX: 00007dbc4ff1c574 [ 191.394594] RDX: 0000000000000005 RSI: 00005a6eeadb0ce0 RDI: 0000000000000001 [ 191.395215] RBP: 00007ffd95a23ae0 R08: 00007dbc50003b20 R09: 0000000000000000 [ 191.395805] R10: 0000000000000001 R11: 0000000000000202 R12: 0000000000000005 [ 191.396404] R13: 00005a6eeadb0ce0 R14: 00007dbc500045c0 R15: 00007dbc50001ee0 [ 191.396987] </TASK> To fix this, we explicitly set such mana debugfs variables to NULL after debugfs_remove() is called. Fixes: 6607c17 ("net: mana: Enable debugfs files for MANA device") Cc: stable@vger.kernel.org Signed-off-by: Shradha Gupta <shradhagupta@linux.microsoft.com> Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com> Reviewed-by: Michal Kubiak <michal.kubiak@intel.com> Link: https://patch.msgid.link/1741688260-28922-1-git-send-email-shradhagupta@linux.microsoft.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Fix race between rmmod and /proc/XXX's inode instantiation. The bug is that pde->proc_ops don't belong to /proc, it belongs to a module, therefore dereferencing it after /proc entry has been registered is a bug unless use_pde/unuse_pde() pair has been used. use_pde/unuse_pde can be avoided (2 atomic ops!) because pde->proc_ops never changes so information necessary for inode instantiation can be saved _before_ proc_register() in PDE itself and used later, avoiding pde->proc_ops->... dereference. rmmod lookup sys_delete_module proc_lookup_de pde_get(de); proc_get_inode(dir->i_sb, de); mod->exit() proc_remove remove_proc_subtree proc_entry_rundown(de); free_module(mod); if (S_ISREG(inode->i_mode)) if (de->proc_ops->proc_read_iter) --> As module is already freed, will trigger UAF BUG: unable to handle page fault for address: fffffbfff80a702b PGD 817fc4067 P4D 817fc4067 PUD 817fc0067 PMD 102ef4067 PTE 0 Oops: Oops: 0000 [#1] PREEMPT SMP KASAN PTI CPU: 26 UID: 0 PID: 2667 Comm: ls Tainted: G Hardware name: QEMU Standard PC (i440FX + PIIX, 1996) RIP: 0010:proc_get_inode+0x302/0x6e0 RSP: 0018:ffff88811c837998 EFLAGS: 00010a06 RAX: dffffc0000000000 RBX: ffffffffc0538140 RCX: 0000000000000007 RDX: 1ffffffff80a702b RSI: 0000000000000001 RDI: ffffffffc0538158 RBP: ffff8881299a6000 R08: 0000000067bbe1e5 R09: 1ffff11023906f20 R10: ffffffffb560ca07 R11: ffffffffb2b43a58 R12: ffff888105bb78f0 R13: ffff888100518048 R14: ffff8881299a6004 R15: 0000000000000001 FS: 00007f95b9686840(0000) GS:ffff8883af100000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: fffffbfff80a702b CR3: 0000000117dd2000 CR4: 00000000000006f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> proc_lookup_de+0x11f/0x2e0 __lookup_slow+0x188/0x350 walk_component+0x2ab/0x4f0 path_lookupat+0x120/0x660 filename_lookup+0x1ce/0x560 vfs_statx+0xac/0x150 __do_sys_newstat+0x96/0x110 do_syscall_64+0x5f/0x170 entry_SYSCALL_64_after_hwframe+0x76/0x7e [adobriyan@gmail.com: don't do 2 atomic ops on the common path] Link: https://lkml.kernel.org/r/3d25ded0-1739-447e-812b-e34da7990dcf@p183 Fixes: 778f3dd ("Fix procfs compat_ioctl regression") Signed-off-by: Ye Bin <yebin10@huawei.com> Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: David S. Miller <davem@davemloft.net> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Many filesystems such as NFS and Ceph do not implement the `invalidate_cache` method. On those filesystems, if writing to the cache (`NETFS_WRITE_TO_CACHE`) fails for some reason, the kernel crashes like this: BUG: kernel NULL pointer dereference, address: 0000000000000000 #PF: supervisor instruction fetch in kernel mode #PF: error_code(0x0010) - not-present page PGD 0 P4D 0 Oops: Oops: 0010 [#1] SMP PTI CPU: 9 UID: 0 PID: 3380 Comm: kworker/u193:11 Not tainted 6.13.3-cm4all1-hp torvalds#437 Hardware name: HP ProLiant DL380 Gen9/ProLiant DL380 Gen9, BIOS P89 10/17/2018 Workqueue: events_unbound netfs_write_collection_worker RIP: 0010:0x0 Code: Unable to access opcode bytes at 0xffffffffffffffd6. RSP: 0018:ffff9b86e2ca7dc0 EFLAGS: 00010202 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 7fffffffffffffff RDX: 0000000000000001 RSI: ffff89259d576a18 RDI: ffff89259d576900 RBP: ffff89259d5769b0 R08: ffff9b86e2ca7d28 R09: 0000000000000002 R10: ffff89258ceaca80 R11: 0000000000000001 R12: 0000000000000020 R13: ffff893d158b9338 R14: ffff89259d576900 R15: ffff89259d5769b0 FS: 0000000000000000(0000) GS:ffff893c9fa40000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffffffffffffd6 CR3: 000000054442e003 CR4: 00000000001706f0 Call Trace: <TASK> ? __die+0x1f/0x60 ? page_fault_oops+0x15c/0x460 ? try_to_wake_up+0x2d2/0x530 ? exc_page_fault+0x5e/0x100 ? asm_exc_page_fault+0x22/0x30 netfs_write_collection_worker+0xe9f/0x12b0 ? xs_poll_check_readable+0x3f/0x80 ? xs_stream_data_receive_workfn+0x8d/0x110 process_one_work+0x134/0x2d0 worker_thread+0x299/0x3a0 ? __pfx_worker_thread+0x10/0x10 kthread+0xba/0xe0 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x30/0x50 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1a/0x30 </TASK> Modules linked in: CR2: 0000000000000000 This patch adds the missing `NULL` check. Fixes: 0e0f2df ("netfs: Dispatch write requests to process a writeback slice") Fixes: 288ace2 ("netfs: New writeback implementation") Signed-off-by: Max Kellermann <max.kellermann@ionos.com> Signed-off-by: David Howells <dhowells@redhat.com> Link: https://lore.kernel.org/r/20250314164201.1993231-3-dhowells@redhat.com Acked-by: "Paulo Alcantara (Red Hat)" <pc@manguebit.com> cc: netfs@lists.linux.dev cc: linux-cifs@vger.kernel.org cc: linux-fsdevel@vger.kernel.org cc: stable@vger.kernel.org Signed-off-by: Christian Brauner <brauner@kernel.org>

stonezdm and others added 30 commits October 4, 2023 19:26

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

merge #1

merge #1

honjow commented Oct 16, 2023

merge #1

merge #1

Conversation

honjow commented Oct 16, 2023