Skip to content
New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

Sign up for GitHub

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

Adding HMS434 machine #14931

Merged
merged 6 commits into from
Aug 20, 2019
Merged

Adding HMS434 machine #14931

Show file tree
Hide file tree
Changes from 5 commits
Commits
Show all changes
6 commits
Select commit Hold shift + click to select a range
4285272
Adding HMS434 machine
maukcc Aug 12, 2019
6eb507a
Update thermistor_331.h
thinkyhead Aug 14, 2019
b9ef8f3
Renumber boards, clean up pins
thinkyhead Aug 14, 2019
f2a1030
Minor config up-to-dates
thinkyhead Aug 14, 2019
4566664
Add 331 to thermistors list
thinkyhead Aug 14, 2019
f09cfae
Update thermistor_331.h
thinkyhead Aug 20, 2019
File filter

Filter by extension

Filter by extension
Conversations
Failed to load comments.
Loading
Jump to
Jump to file
Failed to load files.
Loading
Diff view
Diff view
3 changes: 2 additions & 1 deletion Marlin/Configuration.h
View file
Open in desktop
Original file line number Diff line number Diff line change
Expand Up @@ -359,6 +359,7 @@
* -1 : thermocouple with AD595
* 0 : not used
* 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup)
* 331 : (3.3V scaled thermistor 1 table)
* 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup)
* 3 : Mendel-parts thermistor (4.7k pullup)
* 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !!
Expand Down Expand Up @@ -402,7 +403,7 @@
* 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
* 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
*
* :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '512':"100k RPW-Ultra hotend thermistor", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '18':"ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327" '20':"Pt100 (Ultimainboard V2.x)", '201':"Pt100 (Overlord)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" }
* :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '331':"(3.3V thermistor 1)", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '512':"100k RPW-Ultra hotend thermistor", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '18':"ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327" '20':"Pt100 (Ultimainboard V2.x)", '201':"Pt100 (Overlord)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" }
*/
#define TEMP_SENSOR_0 1
#define TEMP_SENSOR_1 0
Expand Down
38 changes: 20 additions & 18 deletions Marlin/Makefile
View file
Open in desktop
Original file line number Diff line number Diff line change
Expand Up @@ -277,42 +277,44 @@ else ifeq ($(HARDWARE_MOTHERBOARD),1205)
else ifeq ($(HARDWARE_MOTHERBOARD),1300)
# Cartesio CN Controls V12
else ifeq ($(HARDWARE_MOTHERBOARD),1301)
# Cheaptronic v1.0
# Cartesio CN Controls V15
else ifeq ($(HARDWARE_MOTHERBOARD),1302)
# Cheaptronic v2.0
# Cheaptronic v1.0
else ifeq ($(HARDWARE_MOTHERBOARD),1303)
# Makerbot Mightyboard Revision E
# Cheaptronic v2.0
else ifeq ($(HARDWARE_MOTHERBOARD),1304)
# Megatronics
# Makerbot Mightyboard Revision E
else ifeq ($(HARDWARE_MOTHERBOARD),1305)
# Megatronics v2.0
# Megatronics
else ifeq ($(HARDWARE_MOTHERBOARD),1306)
# Megatronics v3.0
# Megatronics v2.0
else ifeq ($(HARDWARE_MOTHERBOARD),1307)
# Megatronics v3.1
# Megatronics v3.0
else ifeq ($(HARDWARE_MOTHERBOARD),1308)
# Megatronics v3.2
# Megatronics v3.1
else ifeq ($(HARDWARE_MOTHERBOARD),1309)
# Elefu Ra Board (v3)
# Megatronics v3.2
else ifeq ($(HARDWARE_MOTHERBOARD),1310)
# Leapfrog
# Elefu Ra Board (v3)
else ifeq ($(HARDWARE_MOTHERBOARD),1311)
# Mega controller
# Leapfrog
else ifeq ($(HARDWARE_MOTHERBOARD),1312)
# Geeetech GT2560 Rev B for Mecreator2
# Mega controller
else ifeq ($(HARDWARE_MOTHERBOARD),1313)
# Geeetech GT2560 Rev. A
# Geeetech GT2560 Rev B for Mecreator2
else ifeq ($(HARDWARE_MOTHERBOARD),1314)
# Geeetech GT2560 Rev. A+ (with auto level probe)
# Geeetech GT2560 Rev. A
else ifeq ($(HARDWARE_MOTHERBOARD),1315)
# Geeetech GT2560 Rev B for A10(M/D)
# Geeetech GT2560 Rev. A+ (with auto level probe)
else ifeq ($(HARDWARE_MOTHERBOARD),1316)
# Geeetech GT2560 Rev B for A20(M/D)
# Geeetech GT2560 Rev B for A10(M/D)
else ifeq ($(HARDWARE_MOTHERBOARD),1317)
# Einstart retrofit
# Geeetech GT2560 Rev B for A20(M/D)
else ifeq ($(HARDWARE_MOTHERBOARD),1318)
# Wanhao 0ne+ i3 Mini
# Einstart retrofit
else ifeq ($(HARDWARE_MOTHERBOARD),1319)
# Wanhao 0ne+ i3 Mini
else ifeq ($(HARDWARE_MOTHERBOARD),1320)

#
# ATmega1281, ATmega2561
Expand Down
37 changes: 19 additions & 18 deletions Marlin/src/core/boards.h
View file
Open in desktop
Original file line number Diff line number Diff line change
Expand Up @@ -113,24 +113,25 @@

#define BOARD_CNCONTROLS_11 1300 // Cartesio CN Controls V11
#define BOARD_CNCONTROLS_12 1301 // Cartesio CN Controls V12
#define BOARD_CHEAPTRONIC 1302 // Cheaptronic v1.0
#define BOARD_CHEAPTRONIC_V2 1303 // Cheaptronic v2.0
#define BOARD_MIGHTYBOARD_REVE 1304 // Makerbot Mightyboard Revision E
#define BOARD_MEGATRONICS 1305 // Megatronics
#define BOARD_MEGATRONICS_2 1306 // Megatronics v2.0
#define BOARD_MEGATRONICS_3 1307 // Megatronics v3.0
#define BOARD_MEGATRONICS_31 1308 // Megatronics v3.1
#define BOARD_MEGATRONICS_32 1309 // Megatronics v3.2
#define BOARD_ELEFU_3 1310 // Elefu Ra Board (v3)
#define BOARD_LEAPFROG 1311 // Leapfrog
#define BOARD_MEGACONTROLLER 1312 // Mega controller
#define BOARD_GT2560_REV_A 1313 // Geeetech GT2560 Rev. A
#define BOARD_GT2560_REV_A_PLUS 1314 // Geeetech GT2560 Rev. A+ (with auto level probe)
#define BOARD_GT2560_V3 1315 // Geeetech GT2560 Rev B for A10(M/D)
#define BOARD_GT2560_V3_MC2 1316 // Geeetech GT2560 Rev B for Mecreator2
#define BOARD_GT2560_V3_A20 1317 // Geeetech GT2560 Rev B for A20(M/D)
#define BOARD_EINSTART_S 1318 // Einstart retrofit
#define BOARD_WANHAO_ONEPLUS 1319 // Wanhao 0ne+ i3 Mini
#define BOARD_CNCONTROLS_15 1302 // Cartesio CN Controls V15
#define BOARD_CHEAPTRONIC 1303 // Cheaptronic v1.0
#define BOARD_CHEAPTRONIC_V2 1304 // Cheaptronic v2.0
#define BOARD_MIGHTYBOARD_REVE 1305 // Makerbot Mightyboard Revision E
#define BOARD_MEGATRONICS 1306 // Megatronics
#define BOARD_MEGATRONICS_2 1307 // Megatronics v2.0
#define BOARD_MEGATRONICS_3 1308 // Megatronics v3.0
#define BOARD_MEGATRONICS_31 1309 // Megatronics v3.1
#define BOARD_MEGATRONICS_32 1310 // Megatronics v3.2
#define BOARD_ELEFU_3 1311 // Elefu Ra Board (v3)
#define BOARD_LEAPFROG 1312 // Leapfrog
#define BOARD_MEGACONTROLLER 1313 // Mega controller
#define BOARD_GT2560_REV_A 1314 // Geeetech GT2560 Rev. A
#define BOARD_GT2560_REV_A_PLUS 1315 // Geeetech GT2560 Rev. A+ (with auto level probe)
#define BOARD_GT2560_V3 1316 // Geeetech GT2560 Rev B for A10(M/D)
#define BOARD_GT2560_V3_MC2 1317 // Geeetech GT2560 Rev B for Mecreator2
#define BOARD_GT2560_V3_A20 1318 // Geeetech GT2560 Rev B for A20(M/D)
#define BOARD_EINSTART_S 1319 // Einstart retrofit
#define BOARD_WANHAO_ONEPLUS 1320 // Wanhao 0ne+ i3 Mini

//
// ATmega1281, ATmega2561
Expand Down
92 changes: 92 additions & 0 deletions Marlin/src/module/thermistor/thermistor_331.h
View file
Open in desktop
Original file line number Diff line number Diff line change
@@ -0,0 +1,92 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
#pragma once

#define OVM(V) OV((V)*0.654)

// R25 = 100 kOhm, beta25 = 4092 K, 4.7 kOhm pull-up, bed thermistor
const short temptable_331[][2] PROGMEM = {
{ OVM( 23), 300 },
{ OVM( 25), 295 },
{ OVM( 27), 290 },
{ OVM( 28), 285 },
{ OVM( 31), 280 },
{ OVM( 33), 275 },
{ OVM( 35), 270 },
{ OVM( 38), 265 },
{ OVM( 41), 260 },
{ OVM( 44), 255 },
{ OVM( 48), 250 },
{ OVM( 52), 245 },
{ OVM( 56), 240 },
{ OVM( 61), 235 },
{ OVM( 66), 230 },
{ OVM( 71), 225 },
{ OVM( 78), 220 },
{ OVM( 84), 215 },
{ OVM( 92), 210 },
{ OVM( 100), 205 },
{ OVM( 109), 200 },
{ OVM( 120), 195 },
{ OVM( 131), 190 },
{ OVM( 143), 185 },
{ OVM( 156), 180 },
{ OVM( 171), 175 },
{ OVM( 187), 170 },
{ OVM( 205), 165 },
{ OVM( 224), 160 },
{ OVM( 245), 155 },
{ OVM( 268), 150 },
{ OVM( 293), 145 },
{ OVM( 320), 140 },
{ OVM( 348), 135 },
{ OVM( 379), 130 },
{ OVM( 411), 125 },
{ OVM( 445), 120 },
{ OVM( 480), 115 },
{ OVM( 516), 110 },
{ OVM( 553), 105 },
{ OVM( 591), 100 },
{ OVM( 628), 95 },
{ OVM( 665), 90 },
{ OVM( 702), 85 },
{ OVM( 737), 80 },
{ OVM( 770), 75 },
{ OVM( 801), 70 },
{ OVM( 830), 65 },
{ OVM( 857), 60 },
{ OVM( 881), 55 },
{ OVM( 903), 50 },
{ OVM( 922), 45 },
{ OVM( 939), 40 },
{ OVM( 954), 35 },
{ OVM( 966), 30 },
{ OVM( 977), 25 },
{ OVM( 985), 20 },
{ OVM( 993), 15 },
{ OVM( 999), 10 },
{ OVM(1004), 5 },
{ OVM(1008), 0 },
{ OVM(1012), -5 },
{ OVM(1016), -10 },
{ OVM(1020), -15 }
};
3 changes: 3 additions & 0 deletions Marlin/src/module/thermistor/thermistors.h
View file
Open in desktop
Original file line number Diff line number Diff line change
Expand Up @@ -131,6 +131,9 @@
#if ANY_THERMISTOR_IS(201) // Pt100 with LMV324 Overlord
#include "thermistor_201.h"
#endif
#if ANY_THERMISTOR_IS(331) // Like table 1, but with 3V3 as input voltage
#include "thermistor_331.h"
#endif
#if ANY_THERMISTOR_IS(666) // beta25 = UNK, R25 = 200K, Pull-up = 10 kOhm, "Unidentified 200K NTC thermistor (Einstart S)"
#include "thermistor_666.h"
#endif
Expand Down
86 changes: 86 additions & 0 deletions Marlin/src/pins/mega/pins_CNCONTROLS_15.h
View file
Open in desktop
Original file line number Diff line number Diff line change
@@ -0,0 +1,86 @@
/**
* CNControls V15 for HMS434 pin assignments
*/

#if !defined(__AVR_ATmega1280__) && !defined(__AVR_ATmega2560__)
#error "Oops! Select 'Arduino/Genuino Mega or Mega 2560' in 'Tools > Board.'"
#endif

#define BOARD_NAME "CN Controls V15"

//
// Servos
//
#define SERVO0_PIN 6

//
// Limit Switches
//
#define X_STOP_PIN 34
#define Y_STOP_PIN 39
#define Z_STOP_PIN 62

#ifndef Z_MIN_PROBE_PIN
#define Z_MIN_PROBE_PIN 49
#endif

//
// Steppers
//
#define X_STEP_PIN 14
#define X_DIR_PIN 25
#define X_ENABLE_PIN 26

#define Y_STEP_PIN 11
#define Y_DIR_PIN 12
#define Y_ENABLE_PIN 15

#define Z_STEP_PIN 24
#define Z_DIR_PIN 27
#define Z_ENABLE_PIN 28

#define E0_STEP_PIN 64
#define E0_DIR_PIN 65
#define E0_ENABLE_PIN 63

//
// Temperature Sensors
// Analog Inputs
//
#define TEMP_0_PIN 2 // Analog Input
#define TEMP_BED_PIN 4 // Analog Input
#define TEMP_CHAMBER_PIN 5 // Analog Input

//
// Heaters
//
#define HEATER_0_PIN 4
#define HEATER_BED_PIN 32
#define HEATER_CHAMBER_PIN 33

//
// Fans
//
#define FAN0_PIN 8
#define ORIG_E0_AUTO_FAN_PIN 30
#define ORIG_E1_AUTO_FAN_PIN 30
#define ORIG_E2_AUTO_FAN_PIN 30
#define ORIG_E3_AUTO_FAN_PIN 30
//#define ORIG_CHAMBER_AUTO_FAN_PIN 10

//
// Misc. Functions
//
#define SDSS 53
#define SD_DETECT_PIN 40

// Common I/O

#define FIL_RUNOUT_PIN 9
//#define FIL_RUNOUT_PIN 29 // encoder sensor
//#define PWM_1_PIN 12
//#define PWM_2_PIN 13
//#define SPARE_IO 17
#define BEEPER_PIN 13
#define STAT_LED_BLUE_PIN -1
#define STAT_LED_RED_PIN 10 // 31
2 changes: 2 additions & 0 deletions Marlin/src/pins/pins.h
View file
Open in desktop
Original file line number Diff line number Diff line change
Expand Up @@ -202,6 +202,8 @@
#include "mega/pins_CNCONTROLS_11.h" // ATmega1280, ATmega2560 env:megaatmega1280 env:megaatmega2560
#elif MB(CNCONTROLS_12)
#include "mega/pins_CNCONTROLS_12.h" // ATmega1280, ATmega2560 env:megaatmega1280 env:megaatmega2560
#elif MB(CNCONTROLS_15)
#include "mega/pins_CNCONTROLS_15.h" // ATmega1280, ATmega2560 env:megaatmega1280 env:megaatmega2560
#elif MB(MIGHTYBOARD_REVE)
#include "mega/pins_MIGHTYBOARD_REVE.h" // ATmega1280, ATmega2560 env:megaatmega1280 env:megaatmega2560
#elif MB(CHEAPTRONIC)
Expand Down
3 changes: 2 additions & 1 deletion config/default/Configuration.h
View file
Open in desktop
Original file line number Diff line number Diff line change
Expand Up @@ -359,6 +359,7 @@
* -1 : thermocouple with AD595
* 0 : not used
* 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup)
* 331 : (3.3V scaled thermistor 1 table)
* 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup)
* 3 : Mendel-parts thermistor (4.7k pullup)
* 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !!
Expand Down Expand Up @@ -402,7 +403,7 @@
* 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
* 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
*
* :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '512':"100k RPW-Ultra hotend thermistor", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '18':"ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327" '20':"Pt100 (Ultimainboard V2.x)", '201':"Pt100 (Overlord)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" }
* :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '331':"(3.3V thermistor 1)", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '512':"100k RPW-Ultra hotend thermistor", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '18':"ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327" '20':"Pt100 (Ultimainboard V2.x)", '201':"Pt100 (Overlord)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" }
*/
#define TEMP_SENSOR_0 1
#define TEMP_SENSOR_1 0
Expand Down
Loading