Fix mdc_kuc_fops and cleanup libcfs_kkuc_msg_put a bit #10

bergwolf · 2013-06-05T10:24:59Z

mdc_kuc_fops is missing open/release handlers. I fixed it before but somehow forgot to amend to the patch sent out. Sorry...

Also fix libcfs_kkuc_msg_put as suggested by Dan Carpenter.

mdc_kuc_fops is missing open/release handlers. I fixed it before but somehow forgot to amend to the patch sent out. Sorry... Signed-off-by: Peng Tao <tao.peng@emc.com>

No need to cast count since it is already ssize_t. No need to cast payload to const, but need __force instead to avoid Sparse complaining. Reported-and-Suggested-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Peng Tao <tao.peng@emc.com>

Daniel Petre reported crashes in icmp_dst_unreach() with following call graph: #3 [ffff88003fc03938] __stack_chk_fail at ffffffff81037f77 #4 [ffff88003fc03948] icmp_send at ffffffff814d5fec #5 [ffff88003fc03ae8] ipv4_link_failure at ffffffff814a1795 #6 [ffff88003fc03af8] ipgre_tunnel_xmit at ffffffff814e7965 #7 [ffff88003fc03b78] dev_hard_start_xmit at ffffffff8146e032 #8 [ffff88003fc03bc8] sch_direct_xmit at ffffffff81487d66 #9 [ffff88003fc03c08] __qdisc_run at ffffffff81487efd #10 [ffff88003fc03c48] dev_queue_xmit at ffffffff8146e5a7 #11 [ffff88003fc03c88] ip_finish_output at ffffffff814ab596 Daniel found a similar problem mentioned in http://lkml.indiana.edu/hypermail/linux/kernel/1007.0/00961.html And indeed this is the root cause : skb->cb[] contains data fooling IP stack. We must clear IPCB in ip_tunnel_xmit() sooner in case dst_link_failure() is called. Or else skb->cb[] might contain garbage from GSO segmentation layer. A similar fix was tested on linux-3.9, but gre code was refactored in linux-3.10. I'll send patches for stable kernels as well. Many thanks to Daniel for providing reports, patches and testing ! Reported-by: Daniel Petre <daniel.petre@rcs-rds.ro> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>

Jiri Kosina <jkosina@suse.cz> and Borislav Petkov <bp@alien8.de> reported the warning: [ 51.616759] ------------[ cut here ]------------ [ 51.621460] WARNING: at arch/x86/kernel/smp.c:123 native_smp_send_reschedule+0x58/0x60() [ 51.629638] Modules linked in: ext2 vfat fat loop snd_hda_codec_hdmi usbhid snd_hda_codec_realtek coretemp kvm_intel kvm snd_hda_intel snd_hda_codec crc32_pclmul crc32c_intel ghash_clmulni_intel snd_hwdep snd_pcm aesni_intel sb_edac aes_x86_64 ehci_pci snd_page_alloc glue_helper snd_timer xhci_hcd snd iTCO_wdt iTCO_vendor_support ehci_hcd edac_core lpc_ich acpi_cpufreq lrw gf128mul ablk_helper cryptd mperf usbcore usb_common soundcore mfd_core dcdbas evdev pcspkr processor i2c_i801 button microcode [ 51.675581] CPU: 0 PID: 244 Comm: kworker/1:1 Tainted: G W 3.10.0-rc1+ #10 [ 51.683407] Hardware name: Dell Inc. Precision T3600/0PTTT9, BIOS A08 01/24/2013 [ 51.690901] Workqueue: events od_dbs_timer [ 51.695069] 0000000000000009 ffff88043a2f5b68 ffffffff8161441c ffff88043a2f5ba8 [ 51.702602] ffffffff8103e540 0000000000000033 0000000000000001 ffff88043d5f8000 [ 51.710136] 00000000ffff0ce1 0000000000000001 ffff88044fc4fc08 ffff88043a2f5bb8 [ 51.717691] Call Trace: [ 51.720191] [<ffffffff8161441c>] dump_stack+0x19/0x1b [ 51.725396] [<ffffffff8103e540>] warn_slowpath_common+0x70/0xa0 [ 51.731473] [<ffffffff8103e58a>] warn_slowpath_null+0x1a/0x20 [ 51.737378] [<ffffffff81025628>] native_smp_send_reschedule+0x58/0x60 [ 51.744013] [<ffffffff81072cfd>] wake_up_nohz_cpu+0x2d/0xa0 [ 51.749745] [<ffffffff8104f6bf>] add_timer_on+0x8f/0x110 [ 51.755214] [<ffffffff8105f6fe>] __queue_delayed_work+0x16e/0x1a0 [ 51.761470] [<ffffffff8105f251>] ? try_to_grab_pending+0xd1/0x1a0 [ 51.767724] [<ffffffff8105f78a>] mod_delayed_work_on+0x5a/0xa0 [ 51.773719] [<ffffffff814f6b5d>] gov_queue_work+0x4d/0xc0 [ 51.779271] [<ffffffff814f60cb>] od_dbs_timer+0xcb/0x170 [ 51.784734] [<ffffffff8105e75d>] process_one_work+0x1fd/0x540 [ 51.790634] [<ffffffff8105e6f2>] ? process_one_work+0x192/0x540 [ 51.796711] [<ffffffff8105ef22>] worker_thread+0x122/0x380 [ 51.802350] [<ffffffff8105ee00>] ? rescuer_thread+0x320/0x320 [ 51.808264] [<ffffffff8106634a>] kthread+0xea/0xf0 [ 51.813200] [<ffffffff81066260>] ? flush_kthread_worker+0x150/0x150 [ 51.819644] [<ffffffff81623d5c>] ret_from_fork+0x7c/0xb0 [ 51.918165] nouveau E[ DRM] GPU lockup - switching to software fbcon [ 51.930505] [<ffffffff81066260>] ? flush_kthread_worker+0x150/0x150 [ 51.936994] ---[ end trace f419538ada83b5c5 ]--- It was caused by the policy->cpus changed during the process of __gov_queue_work(), in other word, cpu offline happened. Use get/put_online_cpus() to prevent the offline from happening while __gov_queue_work() is running. [rjw: The problem has been present since recent commit 031299b (cpufreq: governors: Avoid unnecessary per cpu timer interrupts)] References: https://lkml.org/lkml/2013/6/5/88 Reported-by: Borislav Petkov <bp@alien8.de> Reported-and-tested-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Michael Wang <wangyun@linux.vnet.ibm.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Several people reported the warning: "kernel BUG at kernel/timer.c:729!" and the stack trace is: #7 [ffff880214d25c10] mod_timer+501 at ffffffff8106d905 #8 [ffff880214d25c50] br_multicast_del_pg.isra.20+261 at ffffffffa0731d25 [bridge] #9 [ffff880214d25c80] br_multicast_disable_port+88 at ffffffffa0732948 [bridge] #10 [ffff880214d25cb0] br_stp_disable_port+154 at ffffffffa072bcca [bridge] #11 [ffff880214d25ce8] br_device_event+520 at ffffffffa072a4e8 [bridge] #12 [ffff880214d25d18] notifier_call_chain+76 at ffffffff8164aafc #13 [ffff880214d25d50] raw_notifier_call_chain+22 at ffffffff810858f6 #14 [ffff880214d25d60] call_netdevice_notifiers+45 at ffffffff81536aad #15 [ffff880214d25d80] dev_close_many+183 at ffffffff81536d17 #16 [ffff880214d25dc0] rollback_registered_many+168 at ffffffff81537f68 #17 [ffff880214d25de8] rollback_registered+49 at ffffffff81538101 #18 [ffff880214d25e10] unregister_netdevice_queue+72 at ffffffff815390d8 #19 [ffff880214d25e30] __tun_detach+272 at ffffffffa074c2f0 [tun] #20 [ffff880214d25e88] tun_chr_close+45 at ffffffffa074c4bd [tun] #21 [ffff880214d25ea8] __fput+225 at ffffffff8119b1f1 #22 [ffff880214d25ef0] ____fput+14 at ffffffff8119b3fe #23 [ffff880214d25f00] task_work_run+159 at ffffffff8107cf7f #24 [ffff880214d25f30] do_notify_resume+97 at ffffffff810139e1 #25 [ffff880214d25f50] int_signal+18 at ffffffff8164f292 this is due to I forgot to check if mp->timer is armed in br_multicast_del_pg(). This bug is introduced by commit 9f00b2e (bridge: only expire the mdb entry when query is received). Same for __br_mdb_del(). Tested-by: poma <pomidorabelisima@gmail.com> Reported-by: LiYonghua <809674045@qq.com> Reported-by: Robert Hancock <hancockrwd@gmail.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: Stephen Hemminger <stephen@networkplumber.org> Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by: Cong Wang <amwang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>

…s struct file The following call chain: ------------------------------------------------------------ nfs4_get_vfs_file - nfsd_open - dentry_open - do_dentry_open - __get_file_write_access - get_write_access - return atomic_inc_unless_negative(&inode->i_writecount) ? 0 : -ETXTBSY; ------------------------------------------------------------ can result in the following state: ------------------------------------------------------------ struct nfs4_file { ... fi_fds = {0xffff880c1fa65c80, 0xffffffffffffffe6, 0x0}, fi_access = {{ counter = 0x1 }, { counter = 0x0 }}, ... ------------------------------------------------------------ 1) First time around, in nfs4_get_vfs_file() fp->fi_fds[O_WRONLY] is NULL, hence nfsd_open() is called where we get status set to an error and fp->fi_fds[O_WRONLY] to -ETXTBSY. Thus we do not reach nfs4_file_get_access() and fi_access[O_WRONLY] is not incremented. 2) Second time around, in nfs4_get_vfs_file() fp->fi_fds[O_WRONLY] is NOT NULL (-ETXTBSY), so nfsd_open() is NOT called, but nfs4_file_get_access() IS called and fi_access[O_WRONLY] is incremented. Thus we leave a landmine in the form of the nfs4_file data structure in an incorrect state. 3) Eventually, when __nfs4_file_put_access() is called it finds fi_access[O_WRONLY] being non-zero, it decrements it and calls nfs4_file_put_fd() which tries to fput -ETXTBSY. ------------------------------------------------------------ ... [exception RIP: fput+0x9] RIP: ffffffff81177fa9 RSP: ffff88062e365c90 RFLAGS: 00010282 RAX: ffff880c2b3d99cc RBX: ffff880c2b3d9978 RCX: 0000000000000002 RDX: dead000000100101 RSI: 0000000000000001 RDI: ffffffffffffffe6 RBP: ffff88062e365c90 R8: ffff88041fe797d8 R9: ffff88062e365d58 R10: 0000000000000008 R11: 0000000000000000 R12: 0000000000000001 R13: 0000000000000007 R14: 0000000000000000 R15: 0000000000000000 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 #9 [ffff88062e365c98] __nfs4_file_put_access at ffffffffa0562334 [nfsd] #10 [ffff88062e365cc8] nfs4_file_put_access at ffffffffa05623ab [nfsd] #11 [ffff88062e365ce8] free_generic_stateid at ffffffffa056634d [nfsd] #12 [ffff88062e365d18] release_open_stateid at ffffffffa0566e4b [nfsd] #13 [ffff88062e365d38] nfsd4_close at ffffffffa0567401 [nfsd] #14 [ffff88062e365d88] nfsd4_proc_compound at ffffffffa0557f28 [nfsd] #15 [ffff88062e365dd8] nfsd_dispatch at ffffffffa054543e [nfsd] #16 [ffff88062e365e18] svc_process_common at ffffffffa04ba5a4 [sunrpc] #17 [ffff88062e365e98] svc_process at ffffffffa04babe0 [sunrpc] #18 [ffff88062e365eb8] nfsd at ffffffffa0545b62 [nfsd] #19 [ffff88062e365ee8] kthread at ffffffff81090886 #20 [ffff88062e365f48] kernel_thread at ffffffff8100c14a ------------------------------------------------------------ Cc: stable@vger.kernel.org Signed-off-by: Harshula Jayasuriya <harshula@redhat.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>

When a not fully started aggregation session is destroyed and flushed, we get a warning, e.g. WARNING: at drivers/net/wireless/iwlwifi/pcie/tx.c:1142 iwl_trans_pcie_txq_disable+0x11c/0x160 queue 16 not used Modules linked in: [...] Pid: 5135, comm: hostapd Tainted: G W O 3.5.0 #10 Call Trace: wlan0: driver sets block=0 for sta 00:03:7f:10:44:d3 [<ffffffff81036492>] warn_slowpath_common+0x72/0xa0 [<ffffffff81036577>] warn_slowpath_fmt+0x47/0x50 [<ffffffffa0368d6c>] iwl_trans_pcie_txq_disable+0x11c/0x160 [iwlwifi] [<ffffffffa03a2099>] iwl_mvm_sta_tx_agg_flush+0xe9/0x150 [iwlmvm] [<ffffffffa0396c43>] iwl_mvm_mac_ampdu_action+0xf3/0x1e0 [iwlmvm] [<ffffffffa0293ad3>] ___ieee80211_stop_tx_ba_session+0x193/0x920 [mac80211] [<ffffffffa0294ed8>] __ieee80211_stop_tx_ba_session+0x48/0x70 [mac80211] [<ffffffffa029159f>] ieee80211_sta_tear_down_BA_sessions+0x4f/0x80 [mac80211] [<ffffffffa028a686>] __sta_info_destroy+0x66/0x370 [mac80211] [<ffffffffa028abb4>] sta_info_destroy_addr_bss+0x44/0x70 [mac80211] [<ffffffffa02a3e26>] ieee80211_del_station+0x26/0x50 [mac80211] [<ffffffffa01e6395>] nl80211_del_station+0x85/0x200 [cfg80211] when a station deauthenticated from us without fully setting up the aggregation session. Fix this by checking the aggregation state before removing the hardware queue. Cc: stable@vger.kernel.org Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>

In several places, this snippet is used when removing neigh entries: list_del(&neigh->list); ipoib_neigh_free(neigh); The list_del() removes neigh from the associated struct ipoib_path, while ipoib_neigh_free() removes neigh from the device's neigh entry lookup table. Both of these operations are protected by the priv->lock spinlock. The table however is also protected via RCU, and so naturally the lock is not held when doing reads. This leads to a race condition, in which a thread may successfully look up a neigh entry that has already been deleted from neigh->list. Since the previous deletion will have marked the entry with poison, a second list_del() on the object will cause a panic: #5 [ffff8802338c3c70] general_protection at ffffffff815108c5 [exception RIP: list_del+16] RIP: ffffffff81289020 RSP: ffff8802338c3d20 RFLAGS: 00010082 RAX: dead000000200200 RBX: ffff880433e60c88 RCX: 0000000000009e6c RDX: 0000000000000246 RSI: ffff8806012ca298 RDI: ffff880433e60c88 RBP: ffff8802338c3d30 R8: ffff8806012ca2e8 R9: 00000000ffffffff R10: 0000000000000001 R11: 0000000000000000 R12: ffff8804346b2020 R13: ffff88032a3e7540 R14: ffff8804346b26e0 R15: 0000000000000246 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0000 #6 [ffff8802338c3d38] ipoib_cm_tx_handler at ffffffffa066fe0a [ib_ipoib] #7 [ffff8802338c3d98] cm_process_work at ffffffffa05149a7 [ib_cm] #8 [ffff8802338c3de8] cm_work_handler at ffffffffa05161aa [ib_cm] #9 [ffff8802338c3e38] worker_thread at ffffffff81090e10 #10 [ffff8802338c3ee8] kthread at ffffffff81096c66 #11 [ffff8802338c3f48] kernel_thread at ffffffff8100c0ca We move the list_del() into ipoib_neigh_free(), so that deletion happens only once, after the entry has been successfully removed from the lookup table. This same behavior is already used in ipoib_del_neighs_by_gid() and __ipoib_reap_neigh(). Signed-off-by: Jim Foraker <foraker1@llnl.gov> Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com> Reviewed-by: Jack Wang <jinpu.wang@profitbricks.com> Reviewed-by: Shlomo Pongratz <shlomop@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>

…tions "cat /sys/devices/system/memory/memory*/removable" crashed the system. The problem is that show_mem_removable() is passing a bad pfn to is_mem_section_removable(), which causes if (!node_online(page_to_nid(page))) to blow up. Why is it passing in a bad pfn? The reason is that show_mem_removable() will loop sections_per_block times. sections_per_block is 16, but mem->section_count is 8, indicating holes in this memory block. Checking that the memory section is present before checking to see if the memory section is removable fixes the problem. harp5-sys:~ # cat /sys/devices/system/memory/memory*/removable 0 1 1 1 1 1 1 1 1 1 1 1 1 1 BUG: unable to handle kernel paging request at ffffea00c3200000 IP: [<ffffffff81117ed1>] is_pageblock_removable_nolock+0x1/0x90 PGD 83ffd4067 PUD 37bdfce067 PMD 0 Oops: 0000 [#1] SMP Modules linked in: autofs4 binfmt_misc rdma_ucm rdma_cm iw_cm ib_addr ib_srp scsi_transport_srp scsi_tgt ib_ipoib ib_cm ib_uverbs ib_umad iw_cxgb3 cxgb3 mdio mlx4_en mlx4_ib ib_sa mlx4_core ib_mthca ib_mad ib_core fuse nls_iso8859_1 nls_cp437 vfat fat joydev loop hid_generic usbhid hid hwperf(O) numatools(O) dm_mod iTCO_wdt ipv6 iTCO_vendor_support igb i2c_i801 ioatdma i2c_algo_bit ehci_pci pcspkr lpc_ich i2c_core ehci_hcd ptp sg mfd_core dca rtc_cmos pps_core mperf button xhci_hcd sd_mod crc_t10dif usbcore usb_common scsi_dh_emc scsi_dh_hp_sw scsi_dh_alua scsi_dh_rdac scsi_dh gru(O) xvma(O) xfs crc32c libcrc32c thermal sata_nv processor piix mptsas mptscsih scsi_transport_sas mptbase megaraid_sas fan thermal_sys hwmon ext3 jbd ata_piix ahci libahci libata scsi_mod CPU: 4 PID: 5991 Comm: cat Tainted: G O 3.11.0-rc5-rja-uv+ #10 Hardware name: SGI UV2000/ROMLEY, BIOS SGI UV 2000/3000 series BIOS 01/15/2013 task: ffff88081f034580 ti: ffff880820022000 task.ti: ffff880820022000 RIP: 0010:[<ffffffff81117ed1>] [<ffffffff81117ed1>] is_pageblock_removable_nolock+0x1/0x90 RSP: 0018:ffff880820023df8 EFLAGS: 00010287 RAX: 0000000000040000 RBX: ffffea00c3200000 RCX: 0000000000000004 RDX: ffffea00c30b0000 RSI: 00000000001c0000 RDI: ffffea00c3200000 RBP: ffff880820023e38 R08: 0000000000000000 R09: 0000000000000001 R10: 0000000000000000 R11: 0000000000000001 R12: ffffea00c33c0000 R13: 0000160000000000 R14: 6db6db6db6db6db7 R15: 0000000000000001 FS: 00007ffff7fb2700(0000) GS:ffff88083fc80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffea00c3200000 CR3: 000000081b954000 CR4: 00000000000407e0 Call Trace: show_mem_removable+0x41/0x70 dev_attr_show+0x2a/0x60 sysfs_read_file+0xf7/0x1c0 vfs_read+0xc8/0x130 SyS_read+0x5d/0xa0 system_call_fastpath+0x16/0x1b Signed-off-by: Russ Anderson <rja@sgi.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com> Cc: Yinghai Lu <yinghai@kernel.org> Reviewed-by: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

When booting secondary CPUs, announce_cpu() is called to show which cpu has been brought up. For example: [ 0.402751] smpboot: Booting Node 0, Processors #1 #2 #3 #4 #5 OK [ 0.525667] smpboot: Booting Node 1, Processors #6 #7 #8 #9 #10 #11 OK [ 0.755592] smpboot: Booting Node 0, Processors #12 #13 #14 #15 #16 #17 OK [ 0.890495] smpboot: Booting Node 1, Processors #18 #19 #20 #21 #22 #23 But the last "OK" is lost, because 'nr_cpu_ids-1' represents the maximum possible cpu id. It should use the maximum present cpu id in case not all CPUs booted up. Signed-off-by: Libin <huawei.libin@huawei.com> Cc: <guohanjun@huawei.com> Cc: <wangyijing@huawei.com> Cc: <fenghua.yu@intel.com> Cc: <paul.gortmaker@windriver.com> Link: http://lkml.kernel.org/r/1378378676-18276-1-git-send-email-huawei.libin@huawei.com [ tweaked the changelog, removed unnecessary line break, tweaked the format to align the fields vertically. ] Signed-off-by: Ingo Molnar <mingo@kernel.org>

When parsing lines from objdump a line containing source code starting with a numeric label is mistaken for a line of disassembly starting with a memory address. Current validation fails to recognise that the "memory address" is out of range and calculates an invalid offset which later causes this segfault: Program received signal SIGSEGV, Segmentation fault. 0x0000000000457315 in disasm__calc_percent (notes=0xc98970, evidx=0, offset=143705, end=2127526177, path=0x7fffffffbf50) at util/annotate.c:631 631 hits += h->addr[offset++]; (gdb) bt #0 0x0000000000457315 in disasm__calc_percent (notes=0xc98970, evidx=0, offset=143705, end=2127526177, path=0x7fffffffbf50) at util/annotate.c:631 #1 0x00000000004d65e3 in annotate_browser__calc_percent (browser=0x7fffffffd130, evsel=0xa01da0) at ui/browsers/annotate.c:364 #2 0x00000000004d7433 in annotate_browser__run (browser=0x7fffffffd130, evsel=0xa01da0, hbt=0x0) at ui/browsers/annotate.c:672 #3 0x00000000004d80c9 in symbol__tui_annotate (sym=0xc989a0, map=0xa02660, evsel=0xa01da0, hbt=0x0) at ui/browsers/annotate.c:962 #4 0x00000000004d7aa0 in hist_entry__tui_annotate (he=0xdf73f0, evsel=0xa01da0, hbt=0x0) at ui/browsers/annotate.c:823 #5 0x00000000004dd648 in perf_evsel__hists_browse (evsel=0xa01da0, nr_events=1, helpline= 0x58b768 "For a higher level overview, try: perf report --sort comm,dso", ev_name=0xa02cd0 "cycles", left_exits=false, hbt= 0x0, min_pcnt=0, env=0xa011e0) at ui/browsers/hists.c:1659 #6 0x00000000004de372 in perf_evlist__tui_browse_hists (evlist=0xa01520, help= 0x58b768 "For a higher level overview, try: perf report --sort comm,dso", hbt=0x0, min_pcnt=0, env=0xa011e0) at ui/browsers/hists.c:1950 #7 0x000000000042cf6b in __cmd_report (rep=0x7fffffffd6c0) at builtin-report.c:581 #8 0x000000000042e25d in cmd_report (argc=0, argv=0x7fffffffe4b0, prefix=0x0) at builtin-report.c:965 #9 0x000000000041a0e1 in run_builtin (p=0x801548, argc=1, argv=0x7fffffffe4b0) at perf.c:319 #10 0x000000000041a319 in handle_internal_command (argc=1, argv=0x7fffffffe4b0) at perf.c:376 #11 0x000000000041a465 in run_argv (argcp=0x7fffffffe38c, argv=0x7fffffffe380) at perf.c:420 #12 0x000000000041a707 in main (argc=1, argv=0x7fffffffe4b0) at perf.c:521 After the fix is applied the symbol can be annotated showing the problematic line "1: rep" copy_user_generic_string /usr/lib/debug/lib/modules/3.9.10-100.fc17.x86_64/vmlinux */ ENTRY(copy_user_generic_string) CFI_STARTPROC ASM_STAC andl %edx,%edx and %edx,%edx jz 4f je 37 cmpl $8,%edx cmp $0x8,%edx jb 2f /* less than 8 bytes, go to byte copy loop */ jb 33 ALIGN_DESTINATION mov %edi,%ecx and $0x7,%ecx je 28 sub $0x8,%ecx neg %ecx sub %ecx,%edx 1a: mov (%rsi),%al mov %al,(%rdi) inc %rsi inc %rdi dec %ecx jne 1a movl %edx,%ecx 28: mov %edx,%ecx shrl $3,%ecx shr $0x3,%ecx andl $7,%edx and $0x7,%edx 1: rep 100.00 rep movsq %ds:(%rsi),%es:(%rdi) movsq 2: movl %edx,%ecx 33: mov %edx,%ecx 3: rep rep movsb %ds:(%rsi),%es:(%rdi) movsb 4: xorl %eax,%eax 37: xor %eax,%eax data32 xchg %ax,%ax ASM_CLAC ret retq Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1379009721-27667-1-git-send-email-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

…ux/kernel/git/tip/tip Pull x86 boot changes from Ingo Molnar: "Two changes that prettify and compactify the SMP bootup output from: smpboot: Booting Node 0, Processors #1 #2 #3 OK smpboot: Booting Node 1, Processors #4 #5 #6 #7 OK smpboot: Booting Node 2, Processors #8 #9 #10 #11 OK smpboot: Booting Node 3, Processors #12 #13 #14 #15 OK Brought up 16 CPUs to something like: x86: Booting SMP configuration: .... node #0, CPUs: #1 #2 #3 .... node #1, CPUs: #4 #5 #6 #7 .... node #2, CPUs: #8 #9 #10 #11 .... node #3, CPUs: #12 #13 #14 #15 x86: Booted up 4 nodes, 16 CPUs" * 'x86-boot-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/boot: Further compress CPUs bootup message x86: Improve the printout of the SMP bootup CPU table

…culation Currently mx53 (CortexA8) running at 1GHz reports: Calibrating delay loop... 663.55 BogoMIPS (lpj=3317760) Tom Evans verified that alignments of 0x0 and 0x8 run the two instructions of __loop_delay in one clock cycle (1 clock/loop), while alignments of 0x4 and 0xc take 3 clocks to run the loop twice. (1.5 clock/loop) The original object code looks like this: 00000010 <__loop_const_udelay>: 10: e3e01000 mvn r1, #0 14: e51f201c ldr r2, [pc, #-28] ; 0 <__loop_udelay-0x8> 18: e5922000 ldr r2, [r2] 1c: e0800921 add r0, r0, r1, lsr #18 20: e1a00720 lsr r0, r0, #14 24: e0822b21 add r2, r2, r1, lsr #22 28: e1a02522 lsr r2, r2, #10 2c: e0000092 mul r0, r2, r0 30: e0800d21 add r0, r0, r1, lsr #26 34: e1b00320 lsrs r0, r0, #6 38: 01a0f00e moveq pc, lr 0000003c <__loop_delay>: 3c: e2500001 subs r0, r0, #1 40: 8afffffe bhi 3c <__loop_delay> 44: e1a0f00e mov pc, lr After adding the 'align 3' directive to __loop_delay (align to 8 bytes): 00000010 <__loop_const_udelay>: 10: e3e01000 mvn r1, #0 14: e51f201c ldr r2, [pc, #-28] ; 0 <__loop_udelay-0x8> 18: e5922000 ldr r2, [r2] 1c: e0800921 add r0, r0, r1, lsr #18 20: e1a00720 lsr r0, r0, #14 24: e0822b21 add r2, r2, r1, lsr #22 28: e1a02522 lsr r2, r2, #10 2c: e0000092 mul r0, r2, r0 30: e0800d21 add r0, r0, r1, lsr #26 34: e1b00320 lsrs r0, r0, #6 38: 01a0f00e moveq pc, lr 3c: e320f000 nop {0} 00000040 <__loop_delay>: 40: e2500001 subs r0, r0, #1 44: 8afffffe bhi 40 <__loop_delay> 48: e1a0f00e mov pc, lr 4c: e320f000 nop {0} , which now reports: Calibrating delay loop... 996.14 BogoMIPS (lpj=4980736) Some more test results: On mx31 (ARM1136) running at 532 MHz, before the patch: Calibrating delay loop... 351.43 BogoMIPS (lpj=1757184) On mx31 (ARM1136) running at 532 MHz after the patch: Calibrating delay loop... 528.79 BogoMIPS (lpj=2643968) Also tested on mx6 (CortexA9) and on mx27 (ARM926), which shows the same BogoMIPS value before and after this patch. Reported-by: Tom Evans <tom_usenet@optusnet.com.au> Suggested-by: Tom Evans <tom_usenet@optusnet.com.au> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

commit ec183d2 upstream. Fixes segmentation fault using, for instance: (gdb) run record -I -e intel_pt/tsc=1,noretcomp=1/u /bin/ls Starting program: /home/acme/bin/perf record -I -e intel_pt/tsc=1,noretcomp=1/u /bin/ls Missing separate debuginfos, use: dnf debuginfo-install glibc-2.22-7.fc23.x86_64 [Thread debugging using libthread_db enabled] Using host libthread_db library "/lib64/libthread_db.so.1". Program received signal SIGSEGV, Segmentation fault. 0 x00000000004b9ea5 in tracepoint_error (e=0x0, err=13, sys=0x19b1370 "sched", name=0x19a5d00 "sched_switch") at util/parse-events.c:410 (gdb) bt #0 0x00000000004b9ea5 in tracepoint_error (e=0x0, err=13, sys=0x19b1370 "sched", name=0x19a5d00 "sched_switch") at util/parse-events.c:410 #1 0x00000000004b9fc5 in add_tracepoint (list=0x19a5d20, idx=0x7fffffffb8c0, sys_name=0x19b1370 "sched", evt_name=0x19a5d00 "sched_switch", err=0x0, head_config=0x0) at util/parse-events.c:433 #2 0x00000000004ba334 in add_tracepoint_event (list=0x19a5d20, idx=0x7fffffffb8c0, sys_name=0x19b1370 "sched", evt_name=0x19a5d00 "sched_switch", err=0x0, head_config=0x0) at util/parse-events.c:498 #3 0x00000000004bb699 in parse_events_add_tracepoint (list=0x19a5d20, idx=0x7fffffffb8c0, sys=0x19b1370 "sched", event=0x19a5d00 "sched_switch", err=0x0, head_config=0x0) at util/parse-events.c:936 #4 0x00000000004f6eda in parse_events_parse (_data=0x7fffffffb8b0, scanner=0x19a49d0) at util/parse-events.y:391 #5 0x00000000004bc8e5 in parse_events__scanner (str=0x663ff2 "sched:sched_switch", data=0x7fffffffb8b0, start_token=258) at util/parse-events.c:1361 #6 0x00000000004bca57 in parse_events (evlist=0x19a5220, str=0x663ff2 "sched:sched_switch", err=0x0) at util/parse-events.c:1401 #7 0x0000000000518d5f in perf_evlist__can_select_event (evlist=0x19a3b90, str=0x663ff2 "sched:sched_switch") at util/record.c:253 #8 0x0000000000553c42 in intel_pt_track_switches (evlist=0x19a3b90) at arch/x86/util/intel-pt.c:364 #9 0x00000000005549d1 in intel_pt_recording_options (itr=0x19a2c40, evlist=0x19a3b90, opts=0x8edf68 <record+232>) at arch/x86/util/intel-pt.c:664 #10 0x000000000051e076 in auxtrace_record__options (itr=0x19a2c40, evlist=0x19a3b90, opts=0x8edf68 <record+232>) at util/auxtrace.c:539 #11 0x0000000000433368 in cmd_record (argc=1, argv=0x7fffffffde60, prefix=0x0) at builtin-record.c:1264 #12 0x000000000049bec2 in run_builtin (p=0x8fa2a8 <commands+168>, argc=5, argv=0x7fffffffde60) at perf.c:390 #13 0x000000000049c12a in handle_internal_command (argc=5, argv=0x7fffffffde60) at perf.c:451 #14 0x000000000049c278 in run_argv (argcp=0x7fffffffdcbc, argv=0x7fffffffdcb0) at perf.c:495 #15 0x000000000049c60a in main (argc=5, argv=0x7fffffffde60) at perf.c:618 (gdb) Intel PT attempts to find the sched:sched_switch tracepoint but that seg faults if tracefs is not readable, because the error reporting structure is null, as errors are not reported when automatically adding tracepoints. Fix by checking before using. Committer note: This doesn't take place in a kernel that supports perf_event_attr.context_switch, that is the default way that will be used for tracking context switches, only in older kernels, like 4.2, in a machine with Intel PT (e.g. Broadwell) for non-priviledged users. Further info from a similar patch by Wang: The error is in tracepoint_error: it assumes the 'e' parameter is valid. However, there are many situation a parse_event() can be called without parse_events_error. See result of $ grep 'parse_events(.*NULL)' ./tools/perf/ -r' Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Tong Zhang <ztong@vt.edu> Cc: Wang Nan <wangnan0@huawei.com> Fixes: 1965817 ("perf tools: Enhance parsing events tracepoint error output") Link: http://lkml.kernel.org/r/1453809921-24596-2-git-send-email-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit b6bc1c7 upstream. Function ib_create_qp() was failing to return an error when rdma_rw_init_mrs() fails, causing a crash further down in ib_create_qp() when trying to dereferece the qp pointer which was actually a negative errno. The crash: crash> log|grep BUG [ 136.458121] BUG: unable to handle kernel NULL pointer dereference at 0000000000000098 crash> bt PID: 3736 TASK: ffff8808543215c0 CPU: 2 COMMAND: "kworker/u64:2" #0 [ffff88084d323340] machine_kexec at ffffffff8105fbb0 #1 [ffff88084d3233b0] __crash_kexec at ffffffff81116758 #2 [ffff88084d323480] crash_kexec at ffffffff8111682d #3 [ffff88084d3234b0] oops_end at ffffffff81032bd6 #4 [ffff88084d3234e0] no_context at ffffffff8106e431 #5 [ffff88084d323530] __bad_area_nosemaphore at ffffffff8106e610 #6 [ffff88084d323590] bad_area_nosemaphore at ffffffff8106e6f4 #7 [ffff88084d3235a0] __do_page_fault at ffffffff8106ebdc #8 [ffff88084d323620] do_page_fault at ffffffff8106f057 #9 [ffff88084d323660] page_fault at ffffffff816e3148 [exception RIP: ib_create_qp+427] RIP: ffffffffa02554fb RSP: ffff88084d323718 RFLAGS: 00010246 RAX: 0000000000000004 RBX: fffffffffffffff4 RCX: 000000018020001f RDX: ffff880830997fc0 RSI: 0000000000000001 RDI: ffff88085f407200 RBP: ffff88084d323778 R8: 0000000000000001 R9: ffffea0020bae210 R10: ffffea0020bae218 R11: 0000000000000001 R12: ffff88084d3237c8 R13: 00000000fffffff4 R14: ffff880859fa5000 R15: ffff88082eb89800 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 #10 [ffff88084d323780] rdma_create_qp at ffffffffa0782681 [rdma_cm] #11 [ffff88084d3237b0] nvmet_rdma_create_queue_ib at ffffffffa07c43f3 [nvmet_rdma] #12 [ffff88084d323860] nvmet_rdma_alloc_queue at ffffffffa07c5ba9 [nvmet_rdma] #13 [ffff88084d323900] nvmet_rdma_queue_connect at ffffffffa07c5c96 [nvmet_rdma] #14 [ffff88084d323980] nvmet_rdma_cm_handler at ffffffffa07c6450 [nvmet_rdma] #15 [ffff88084d3239b0] iw_conn_req_handler at ffffffffa0787480 [rdma_cm] #16 [ffff88084d323a60] cm_conn_req_handler at ffffffffa0775f06 [iw_cm] #17 [ffff88084d323ab0] process_event at ffffffffa0776019 [iw_cm] #18 [ffff88084d323af0] cm_work_handler at ffffffffa0776170 [iw_cm] #19 [ffff88084d323cb0] process_one_work at ffffffff810a1483 #20 [ffff88084d323d90] worker_thread at ffffffff810a211d #21 [ffff88084d323ec0] kthread at ffffffff810a6c5c #22 [ffff88084d323f50] ret_from_fork at ffffffff816e1ebf Fixes: 632bc3f ("IB/core, RDMA RW API: Do not exceed QP SGE send limit") Signed-off-by: Steve Wise <swise@opengridcomputing.com> Reviewed-by: Bart Van Assche <bart.vanassche@sandisk.com> Signed-off-by: Doug Ledford <dledford@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 4dfce57 upstream. There have been several reports over the years of NULL pointer dereferences in xfs_trans_log_inode during xfs_fsr processes, when the process is doing an fput and tearing down extents on the temporary inode, something like: BUG: unable to handle kernel NULL pointer dereference at 0000000000000018 PID: 29439 TASK: ffff880550584fa0 CPU: 6 COMMAND: "xfs_fsr" [exception RIP: xfs_trans_log_inode+0x10] #9 [ffff8800a57bbbe0] xfs_bunmapi at ffffffffa037398e [xfs] #10 [ffff8800a57bbce8] xfs_itruncate_extents at ffffffffa0391b29 [xfs] #11 [ffff8800a57bbd88] xfs_inactive_truncate at ffffffffa0391d0c [xfs] #12 [ffff8800a57bbdb8] xfs_inactive at ffffffffa0392508 [xfs] #13 [ffff8800a57bbdd8] xfs_fs_evict_inode at ffffffffa035907e [xfs] #14 [ffff8800a57bbe00] evict at ffffffff811e1b67 #15 [ffff8800a57bbe28] iput at ffffffff811e23a5 #16 [ffff8800a57bbe58] dentry_kill at ffffffff811dcfc8 #17 [ffff8800a57bbe88] dput at ffffffff811dd06c #18 [ffff8800a57bbea8] __fput at ffffffff811c823b #19 [ffff8800a57bbef0] ____fput at ffffffff811c846e #20 [ffff8800a57bbf00] task_work_run at ffffffff81093b27 #21 [ffff8800a57bbf30] do_notify_resume at ffffffff81013b0c #22 [ffff8800a57bbf50] int_signal at ffffffff8161405d As it turns out, this is because the i_itemp pointer, along with the d_ops pointer, has been overwritten with zeros when we tear down the extents during truncate. When the in-core inode fork on the temporary inode used by xfs_fsr was originally set up during the extent swap, we mistakenly looked at di_nextents to determine whether all extents fit inline, but this misses extents generated by speculative preallocation; we should be using if_bytes instead. This mistake corrupts the in-memory inode, and code in xfs_iext_remove_inline eventually gets bad inputs, causing it to memmove and memset incorrect ranges; this became apparent because the two values in ifp->if_u2.if_inline_ext[1] contained what should have been in d_ops and i_itemp; they were memmoved due to incorrect array indexing and then the original locations were zeroed with memset, again due to an array overrun. Fix this by properly using i_df.if_bytes to determine the number of extents, not di_nextents. Thanks to dchinner for looking at this with me and spotting the root cause. Signed-off-by: Eric Sandeen <sandeen@redhat.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 45caeaa ] As Eric Dumazet pointed out this also needs to be fixed in IPv6. v2: Contains the IPv6 tcp/Ipv6 dccp patches as well. We have seen a few incidents lately where a dst_enty has been freed with a dangling TCP socket reference (sk->sk_dst_cache) pointing to that dst_entry. If the conditions/timings are right a crash then ensues when the freed dst_entry is referenced later on. A Common crashing back trace is: #8 [] page_fault at ffffffff8163e648 [exception RIP: __tcp_ack_snd_check+74] . . #9 [] tcp_rcv_established at ffffffff81580b64 #10 [] tcp_v4_do_rcv at ffffffff8158b54a #11 [] tcp_v4_rcv at ffffffff8158cd02 #12 [] ip_local_deliver_finish at ffffffff815668f4 #13 [] ip_local_deliver at ffffffff81566bd9 #14 [] ip_rcv_finish at ffffffff8156656d #15 [] ip_rcv at ffffffff81566f06 #16 [] __netif_receive_skb_core at ffffffff8152b3a2 #17 [] __netif_receive_skb at ffffffff8152b608 #18 [] netif_receive_skb at ffffffff8152b690 #19 [] vmxnet3_rq_rx_complete at ffffffffa015eeaf [vmxnet3] #20 [] vmxnet3_poll_rx_only at ffffffffa015f32a [vmxnet3] #21 [] net_rx_action at ffffffff8152bac2 #22 [] __do_softirq at ffffffff81084b4f #23 [] call_softirq at ffffffff8164845c #24 [] do_softirq at ffffffff81016fc5 #25 [] irq_exit at ffffffff81084ee5 #26 [] do_IRQ at ffffffff81648ff8 Of course it may happen with other NIC drivers as well. It's found the freed dst_entry here: 224 static bool tcp_in_quickack_mode(struct sock *sk)↩ 225 {↩ 226 ▹ const struct inet_connection_sock *icsk = inet_csk(sk);↩ 227 ▹ const struct dst_entry *dst = __sk_dst_get(sk);↩ 228 ↩ 229 ▹ return (dst && dst_metric(dst, RTAX_QUICKACK)) ||↩ 230 ▹ ▹ (icsk->icsk_ack.quick && !icsk->icsk_ack.pingpong);↩ 231 }↩ But there are other backtraces attributed to the same freed dst_entry in netfilter code as well. All the vmcores showed 2 significant clues: - Remote hosts behind the default gateway had always been redirected to a different gateway. A rtable/dst_entry will be added for that host. Making more dst_entrys with lower reference counts. Making this more probable. - All vmcores showed a postitive LockDroppedIcmps value, e.g: LockDroppedIcmps 267 A closer look at the tcp_v4_err() handler revealed that do_redirect() will run regardless of whether user space has the socket locked. This can result in a race condition where the same dst_entry cached in sk->sk_dst_entry can be decremented twice for the same socket via: do_redirect()->__sk_dst_check()-> dst_release(). Which leads to the dst_entry being prematurely freed with another socket pointing to it via sk->sk_dst_cache and a subsequent crash. To fix this skip do_redirect() if usespace has the socket locked. Instead let the redirect take place later when user space does not have the socket locked. The dccp/IPv6 code is very similar in this respect, so fixing it there too. As Eric Garver pointed out the following commit now invalidates routes. Which can set the dst->obsolete flag so that ipv4_dst_check() returns null and triggers the dst_release(). Fixes: ceb3320 ("ipv4: Kill routes during PMTU/redirect updates.") Cc: Eric Garver <egarver@redhat.com> Cc: Hannes Sowa <hsowa@redhat.com> Signed-off-by: Jon Maxwell <jmaxwell37@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mipsxx_pmu_handle_shared_irq() calls irq_work_run() while holding the pmuint_rwlock for read. irq_work_run() can, via perf_pending_event(), call try_to_wake_up() which can try to take rq->lock. However, perf can also call perf_pmu_enable() (and thus take the pmuint_rwlock for write) while holding the rq->lock, from finish_task_switch() via perf_event_context_sched_in(). This leads to an ABBA deadlock: PID: 3855 TASK: 8f7ce288 CPU: 2 COMMAND: "process" #0 [89c39ac8] __delay at 803b5be4 #1 [89c39ac8] do_raw_spin_lock at 8008fdcc #2 [89c39af8] try_to_wake_up at 8006e47c #3 [89c39b38] pollwake at 8018eab0 #4 [89c39b68] __wake_up_common at 800879f4 #5 [89c39b98] __wake_up at 800880e4 #6 [89c39bc8] perf_event_wakeup at 8012109c #7 [89c39be8] perf_pending_event at 80121184 #8 [89c39c08] irq_work_run_list at 801151f0 #9 [89c39c38] irq_work_run at 80115274 #10 [89c39c50] mipsxx_pmu_handle_shared_irq at 8002cc7c PID: 1481 TASK: 8eaac6a8 CPU: 3 COMMAND: "process" #0 [8de7f900] do_raw_write_lock at 800900e0 #1 [8de7f918] perf_event_context_sched_in at 80122310 #2 [8de7f938] __perf_event_task_sched_in at 80122608 #3 [8de7f958] finish_task_switch at 8006b8a4 #4 [8de7f998] __schedule at 805e4dc4 #5 [8de7f9f8] schedule at 805e5558 #6 [8de7fa10] schedule_hrtimeout_range_clock at 805e9984 #7 [8de7fa70] poll_schedule_timeout at 8018e8f8 #8 [8de7fa88] do_select at 8018f338 #9 [8de7fd88] core_sys_select at 8018f5cc #10 [8de7fee0] sys_select at 8018f854 #11 [8de7ff28] syscall_common at 80028fc8 The lock seems to be there to protect the hardware counters so there is no need to hold it across irq_work_run(). Signed-off-by: Rabin Vincent <rabinv@axis.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

I compiled with AddressSanitizer and I had these memory leaks while I was using the tep_parse_format function: Direct leak of 28 byte(s) in 4 object(s) allocated from: #0 0x7fb07db49ffe in __interceptor_realloc (/lib/x86_64-linux-gnu/libasan.so.5+0x10dffe) #1 0x7fb07a724228 in extend_token /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:985 #2 0x7fb07a724c21 in __read_token /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:1140 #3 0x7fb07a724f78 in read_token /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:1206 #4 0x7fb07a725191 in __read_expect_type /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:1291 #5 0x7fb07a7251df in read_expect_type /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:1299 #6 0x7fb07a72e6c8 in process_dynamic_array_len /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:2849 #7 0x7fb07a7304b8 in process_function /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:3161 #8 0x7fb07a730900 in process_arg_token /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:3207 #9 0x7fb07a727c0b in process_arg /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:1786 #10 0x7fb07a731080 in event_read_print_args /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:3285 #11 0x7fb07a731722 in event_read_print /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:3369 #12 0x7fb07a740054 in __tep_parse_format /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:6335 #13 0x7fb07a74047a in __parse_event /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:6389 #14 0x7fb07a740536 in tep_parse_format /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:6431 #15 0x7fb07a785acf in parse_event ../../../src/fs-src/fs.c:251 #16 0x7fb07a785ccd in parse_systems ../../../src/fs-src/fs.c:284 #17 0x7fb07a786fb3 in read_metadata ../../../src/fs-src/fs.c:593 #18 0x7fb07a78760e in ftrace_fs_source_init ../../../src/fs-src/fs.c:727 #19 0x7fb07d90c19c in add_component_with_init_method_data ../../../../src/lib/graph/graph.c:1048 #20 0x7fb07d90c87b in add_source_component_with_initialize_method_data ../../../../src/lib/graph/graph.c:1127 #21 0x7fb07d90c92a in bt_graph_add_source_component ../../../../src/lib/graph/graph.c:1152 #22 0x55db11aa632e in cmd_run_ctx_create_components_from_config_components ../../../src/cli/babeltrace2.c:2252 #23 0x55db11aa6fda in cmd_run_ctx_create_components ../../../src/cli/babeltrace2.c:2347 #24 0x55db11aa780c in cmd_run ../../../src/cli/babeltrace2.c:2461 #25 0x55db11aa8a7d in main ../../../src/cli/babeltrace2.c:2673 #26 0x7fb07d5460b2 in __libc_start_main (/lib/x86_64-linux-gnu/libc.so.6+0x270b2) The token variable in the process_dynamic_array_len function is allocated in the read_expect_type function, but is not freed before calling the read_token function. Free the token variable before calling read_token in order to plug the leak. Signed-off-by: Philippe Duplessis-Guindon <pduplessis@efficios.com> Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Link: https://lore.kernel.org/linux-trace-devel/20200730150236.5392-1-pduplessis@efficios.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Disable i2c bus #9, #10 and #13 as these i2c controllers are not used on Wedge40. Signed-off-by: Tao Ren <rentao.bupt@gmail.com> Signed-off-by: Joel Stanley <joel@jms.id.au>

The following deadlock was captured. The first process is holding 'kernfs_mutex' and hung by io. The io was staging in 'r1conf.pending_bio_list' of raid1 device, this pending bio list would be flushed by second process 'md127_raid1', but it was hung by 'kernfs_mutex'. Using sysfs_notify_dirent_safe() to replace sysfs_notify() can fix it. There were other sysfs_notify() invoked from io path, removed all of them. PID: 40430 TASK: ffff8ee9c8c65c40 CPU: 29 COMMAND: "probe_file" #0 [ffffb87c4df37260] __schedule at ffffffff9a8678ec #1 [ffffb87c4df372f8] schedule at ffffffff9a867f06 #2 [ffffb87c4df37310] io_schedule at ffffffff9a0c73e6 #3 [ffffb87c4df37328] __dta___xfs_iunpin_wait_3443 at ffffffffc03a4057 [xfs] #4 [ffffb87c4df373a0] xfs_iunpin_wait at ffffffffc03a6c79 [xfs] #5 [ffffb87c4df373b0] __dta_xfs_reclaim_inode_3357 at ffffffffc039a46c [xfs] #6 [ffffb87c4df37400] xfs_reclaim_inodes_ag at ffffffffc039a8b6 [xfs] #7 [ffffb87c4df37590] xfs_reclaim_inodes_nr at ffffffffc039bb33 [xfs] #8 [ffffb87c4df375b0] xfs_fs_free_cached_objects at ffffffffc03af0e9 [xfs] #9 [ffffb87c4df375c0] super_cache_scan at ffffffff9a287ec7 #10 [ffffb87c4df37618] shrink_slab at ffffffff9a1efd93 #11 [ffffb87c4df37700] shrink_node at ffffffff9a1f5968 #12 [ffffb87c4df37788] do_try_to_free_pages at ffffffff9a1f5ea2 #13 [ffffb87c4df377f0] try_to_free_mem_cgroup_pages at ffffffff9a1f6445 #14 [ffffb87c4df37880] try_charge at ffffffff9a26cc5f #15 [ffffb87c4df37920] memcg_kmem_charge_memcg at ffffffff9a270f6a #16 [ffffb87c4df37958] new_slab at ffffffff9a251430 #17 [ffffb87c4df379c0] ___slab_alloc at ffffffff9a251c85 #18 [ffffb87c4df37a80] __slab_alloc at ffffffff9a25635d #19 [ffffb87c4df37ac0] kmem_cache_alloc at ffffffff9a251f89 #20 [ffffb87c4df37b00] alloc_inode at ffffffff9a2a2b10 #21 [ffffb87c4df37b20] iget_locked at ffffffff9a2a4854 #22 [ffffb87c4df37b60] kernfs_get_inode at ffffffff9a311377 #23 [ffffb87c4df37b80] kernfs_iop_lookup at ffffffff9a311e2b #24 [ffffb87c4df37ba8] lookup_slow at ffffffff9a290118 #25 [ffffb87c4df37c10] walk_component at ffffffff9a291e83 #26 [ffffb87c4df37c78] path_lookupat at ffffffff9a293619 #27 [ffffb87c4df37cd8] filename_lookup at ffffffff9a2953af #28 [ffffb87c4df37de8] user_path_at_empty at ffffffff9a295566 #29 [ffffb87c4df37e10] vfs_statx at ffffffff9a289787 #30 [ffffb87c4df37e70] SYSC_newlstat at ffffffff9a289d5d #31 [ffffb87c4df37f18] sys_newlstat at ffffffff9a28a60e #32 [ffffb87c4df37f28] do_syscall_64 at ffffffff9a003949 #33 [ffffb87c4df37f50] entry_SYSCALL_64_after_hwframe at ffffffff9aa001ad RIP: 00007f617a5f2905 RSP: 00007f607334f838 RFLAGS: 00000246 RAX: ffffffffffffffda RBX: 00007f6064044b20 RCX: 00007f617a5f2905 RDX: 00007f6064044b20 RSI: 00007f6064044b20 RDI: 00007f6064005890 RBP: 00007f6064044aa0 R8: 0000000000000030 R9: 000000000000011c R10: 0000000000000013 R11: 0000000000000246 R12: 00007f606417e6d0 R13: 00007f6064044aa0 R14: 00007f6064044b10 R15: 00000000ffffffff ORIG_RAX: 0000000000000006 CS: 0033 SS: 002b PID: 927 TASK: ffff8f15ac5dbd80 CPU: 42 COMMAND: "md127_raid1" #0 [ffffb87c4df07b28] __schedule at ffffffff9a8678ec #1 [ffffb87c4df07bc0] schedule at ffffffff9a867f06 #2 [ffffb87c4df07bd8] schedule_preempt_disabled at ffffffff9a86825e #3 [ffffb87c4df07be8] __mutex_lock at ffffffff9a869bcc #4 [ffffb87c4df07ca0] __mutex_lock_slowpath at ffffffff9a86a013 #5 [ffffb87c4df07cb0] mutex_lock at ffffffff9a86a04f #6 [ffffb87c4df07cc8] kernfs_find_and_get_ns at ffffffff9a311d83 #7 [ffffb87c4df07cf0] sysfs_notify at ffffffff9a314b3a #8 [ffffb87c4df07d18] md_update_sb at ffffffff9a688696 #9 [ffffb87c4df07d98] md_update_sb at ffffffff9a6886d5 #10 [ffffb87c4df07da8] md_check_recovery at ffffffff9a68ad9c #11 [ffffb87c4df07dd0] raid1d at ffffffffc01f0375 [raid1] #12 [ffffb87c4df07ea0] md_thread at ffffffff9a680348 #13 [ffffb87c4df07f08] kthread at ffffffff9a0b8005 #14 [ffffb87c4df07f50] ret_from_fork at ffffffff9aa00344 Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com> Signed-off-by: Song Liu <songliubraving@fb.com>

This patch is to fix a crash: #3 [ffffb6580689f898] oops_end at ffffffffa2835bc2 #4 [ffffb6580689f8b8] no_context at ffffffffa28766e7 #5 [ffffb6580689f920] async_page_fault at ffffffffa320135e [exception RIP: f2fs_is_compressed_page+34] RIP: ffffffffa2ba83a2 RSP: ffffb6580689f9d8 RFLAGS: 00010213 RAX: 0000000000000001 RBX: fffffc0f50b34bc0 RCX: 0000000000002122 RDX: 0000000000002123 RSI: 0000000000000c00 RDI: fffffc0f50b34bc0 RBP: ffff97e815a40178 R8: 0000000000000000 R9: ffff97e83ffc9000 R10: 0000000000032300 R11: 0000000000032380 R12: ffffb6580689fa38 R13: fffffc0f50b34bc0 R14: ffff97e825cbd000 R15: 0000000000000c00 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 #6 [ffffb6580689f9d8] __is_cp_guaranteed at ffffffffa2b7ea98 #7 [ffffb6580689f9f0] f2fs_submit_page_write at ffffffffa2b81a69 #8 [ffffb6580689fa30] f2fs_do_write_meta_page at ffffffffa2b99777 #9 [ffffb6580689fae0] __f2fs_write_meta_page at ffffffffa2b75f1a #10 [ffffb6580689fb18] f2fs_sync_meta_pages at ffffffffa2b77466 #11 [ffffb6580689fc98] do_checkpoint at ffffffffa2b78e46 #12 [ffffb6580689fd88] f2fs_write_checkpoint at ffffffffa2b79c29 #13 [ffffb6580689fdd0] f2fs_sync_fs at ffffffffa2b69d95 #14 [ffffb6580689fe20] sync_filesystem at ffffffffa2ad2574 #15 [ffffb6580689fe30] generic_shutdown_super at ffffffffa2a9b582 #16 [ffffb6580689fe48] kill_block_super at ffffffffa2a9b6d1 #17 [ffffb6580689fe60] kill_f2fs_super at ffffffffa2b6abe1 #18 [ffffb6580689fea0] deactivate_locked_super at ffffffffa2a9afb6 #19 [ffffb6580689feb8] cleanup_mnt at ffffffffa2abcad4 #20 [ffffb6580689fee0] task_work_run at ffffffffa28bca28 #21 [ffffb6580689ff00] exit_to_usermode_loop at ffffffffa28050b7 #22 [ffffb6580689ff38] do_syscall_64 at ffffffffa280560e #23 [ffffb6580689ff50] entry_SYSCALL_64_after_hwframe at ffffffffa320008c This occurred when umount f2fs if enable F2FS_FS_COMPRESSION with F2FS_IO_TRACE. Fixes it by adding IS_IO_TRACED_PAGE to check validity of pid for page_private. Signed-off-by: Yu Changchun <yuchangchun1@huawei.com> Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>

https://bugzilla.kernel.org/show_bug.cgi?id=208565 PID: 257 TASK: ecdd0000 CPU: 0 COMMAND: "init" #0 [<c0b420ec>] (__schedule) from [<c0b423c8>] #1 [<c0b423c8>] (schedule) from [<c0b459d4>] #2 [<c0b459d4>] (rwsem_down_read_failed) from [<c0b44fa0>] #3 [<c0b44fa0>] (down_read) from [<c044233c>] #4 [<c044233c>] (f2fs_truncate_blocks) from [<c0442890>] #5 [<c0442890>] (f2fs_truncate) from [<c044d408>] #6 [<c044d408>] (f2fs_evict_inode) from [<c030be18>] #7 [<c030be18>] (evict) from [<c030a558>] #8 [<c030a558>] (iput) from [<c047c600>] #9 [<c047c600>] (f2fs_sync_node_pages) from [<c0465414>] #10 [<c0465414>] (f2fs_write_checkpoint) from [<c04575f4>] #11 [<c04575f4>] (f2fs_sync_fs) from [<c0441918>] #12 [<c0441918>] (f2fs_do_sync_file) from [<c0441098>] #13 [<c0441098>] (f2fs_sync_file) from [<c0323fa0>] #14 [<c0323fa0>] (vfs_fsync_range) from [<c0324294>] #15 [<c0324294>] (do_fsync) from [<c0324014>] #16 [<c0324014>] (sys_fsync) from [<c0108bc0>] This can be caused by flush_dirty_inode() in f2fs_sync_node_pages() where iput() requires f2fs_lock_op() again resulting in livelock. Reported-by: Zhiguo Niu <Zhiguo.Niu@unisoc.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>

…s metrics" test Linux 5.9 introduced perf test case "Parse and process metrics" and on s390 this test case always dumps core: [root@t35lp67 perf]# ./perf test -vvvv -F 67 67: Parse and process metrics : --- start --- metric expr inst_retired.any / cpu_clk_unhalted.thread for IPC parsing metric: inst_retired.any / cpu_clk_unhalted.thread Segmentation fault (core dumped) [root@t35lp67 perf]# I debugged this core dump and gdb shows this call chain: (gdb) where #0 0x000003ffabc3192a in __strnlen_c_1 () from /lib64/libc.so.6 #1 0x000003ffabc293de in strcasestr () from /lib64/libc.so.6 #2 0x0000000001102ba2 in match_metric(list=0x1e6ea20 "inst_retired.any", n=<optimized out>) at util/metricgroup.c:368 #3 find_metric (map=<optimized out>, map=<optimized out>, metric=0x1e6ea20 "inst_retired.any") at util/metricgroup.c:765 #4 __resolve_metric (ids=0x0, map=<optimized out>, metric_list=0x0, metric_no_group=<optimized out>, m=<optimized out>) at util/metricgroup.c:844 #5 resolve_metric (ids=0x0, map=0x0, metric_list=0x0, metric_no_group=<optimized out>) at util/metricgroup.c:881 #6 metricgroup__add_metric (metric=<optimized out>, metric_no_group=metric_no_group@entry=false, events=<optimized out>, events@entry=0x3ffd84fb878, metric_list=0x0, metric_list@entry=0x3ffd84fb868, map=0x0) at util/metricgroup.c:943 #7 0x00000000011034ae in metricgroup__add_metric_list (map=0x13f9828 <map>, metric_list=0x3ffd84fb868, events=0x3ffd84fb878, metric_no_group=<optimized out>, list=<optimized out>) at util/metricgroup.c:988 #8 parse_groups (perf_evlist=perf_evlist@entry=0x1e70260, str=str@entry=0x12f34b2 "IPC", metric_no_group=<optimized out>, metric_no_merge=<optimized out>, fake_pmu=fake_pmu@entry=0x1462f18 <perf_pmu.fake>, metric_events=0x3ffd84fba58, map=0x1) at util/metricgroup.c:1040 #9 0x0000000001103eb2 in metricgroup__parse_groups_test( evlist=evlist@entry=0x1e70260, map=map@entry=0x13f9828 <map>, str=str@entry=0x12f34b2 "IPC", metric_no_group=metric_no_group@entry=false, metric_no_merge=metric_no_merge@entry=false, metric_events=0x3ffd84fba58) at util/metricgroup.c:1082 #10 0x00000000010c84d8 in __compute_metric (ratio2=0x0, name2=0x0, ratio1=<synthetic pointer>, name1=0x12f34b2 "IPC", vals=0x3ffd84fbad8, name=0x12f34b2 "IPC") at tests/parse-metric.c:159 #11 compute_metric (ratio=<synthetic pointer>, vals=0x3ffd84fbad8, name=0x12f34b2 "IPC") at tests/parse-metric.c:189 #12 test_ipc () at tests/parse-metric.c:208 ..... ..... omitted many more lines This test case was added with commit 218ca91 ("perf tests: Add parse metric test for frontend metric"). When I compile with make DEBUG=y it works fine and I do not get a core dump. It turned out that the above listed function call chain worked on a struct pmu_event array which requires a trailing element with zeroes which was missing. The marco map_for_each_event() loops over that array tests for members metric_expr/metric_name/metric_group being non-NULL. Adding this element fixes the issue. Output after: [root@t35lp46 perf]# ./perf test 67 67: Parse and process metrics : Ok [root@t35lp46 perf]# Committer notes: As Ian remarks, this is not s390 specific: <quote Ian> This also shows up with address sanitizer on all architectures (perhaps change the patch title) and perhaps add a "Fixes: <commit>" tag. ================================================================= ==4718==ERROR: AddressSanitizer: global-buffer-overflow on address 0x55c93b4d59e8 at pc 0x55c93a1541e2 bp 0x7ffd24327c60 sp 0x7ffd24327c58 READ of size 8 at 0x55c93b4d59e8 thread T0 #0 0x55c93a1541e1 in find_metric tools/perf/util/metricgroup.c:764:2 #1 0x55c93a153e6c in __resolve_metric tools/perf/util/metricgroup.c:844:9 #2 0x55c93a152f18 in resolve_metric tools/perf/util/metricgroup.c:881:9 #3 0x55c93a1528db in metricgroup__add_metric tools/perf/util/metricgroup.c:943:9 #4 0x55c93a151996 in metricgroup__add_metric_list tools/perf/util/metricgroup.c:988:9 #5 0x55c93a1511b9 in parse_groups tools/perf/util/metricgroup.c:1040:8 #6 0x55c93a1513e1 in metricgroup__parse_groups_test tools/perf/util/metricgroup.c:1082:9 #7 0x55c93a0108ae in __compute_metric tools/perf/tests/parse-metric.c:159:8 #8 0x55c93a010744 in compute_metric tools/perf/tests/parse-metric.c:189:9 #9 0x55c93a00f5ee in test_ipc tools/perf/tests/parse-metric.c:208:2 #10 0x55c93a00f1e8 in test__parse_metric tools/perf/tests/parse-metric.c:345:2 #11 0x55c939fd7202 in run_test tools/perf/tests/builtin-test.c:410:9 #12 0x55c939fd6736 in test_and_print tools/perf/tests/builtin-test.c:440:9 #13 0x55c939fd58c3 in __cmd_test tools/perf/tests/builtin-test.c:661:4 #14 0x55c939fd4e02 in cmd_test tools/perf/tests/builtin-test.c:807:9 #15 0x55c939e4763d in run_builtin tools/perf/perf.c:313:11 #16 0x55c939e46475 in handle_internal_command tools/perf/perf.c:365:8 #17 0x55c939e4737e in run_argv tools/perf/perf.c:409:2 #18 0x55c939e45f7e in main tools/perf/perf.c:539:3 0x55c93b4d59e8 is located 0 bytes to the right of global variable 'pme_test' defined in 'tools/perf/tests/parse-metric.c:17:25' (0x55c93b4d54a0) of size 1352 SUMMARY: AddressSanitizer: global-buffer-overflow tools/perf/util/metricgroup.c:764:2 in find_metric Shadow bytes around the buggy address: 0x0ab9a7692ae0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x0ab9a7692af0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x0ab9a7692b00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x0ab9a7692b10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x0ab9a7692b20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 =>0x0ab9a7692b30: 00 00 00 00 00 00 00 00 00 00 00 00 00[f9]f9 f9 0x0ab9a7692b40: f9 f9 f9 f9 f9 f9 f9 f9 f9 f9 f9 f9 f9 f9 f9 f9 0x0ab9a7692b50: f9 f9 f9 f9 f9 f9 f9 f9 f9 f9 f9 f9 f9 f9 f9 f9 0x0ab9a7692b60: f9 f9 f9 f9 f9 f9 f9 f9 00 00 00 00 00 00 00 00 0x0ab9a7692b70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x0ab9a7692b80: f9 f9 f9 f9 f9 f9 f9 f9 f9 f9 f9 f9 f9 f9 f9 f9 Shadow byte legend (one shadow byte represents 8 application bytes): Addressable: 00 Partially addressable: 01 02 03 04 05 06 07 Heap left redzone: fa Freed heap region: fd Stack left redzone: f1 Stack mid redzone: f2 Stack right redzone: f3 Stack after return: f5 Stack use after scope: f8 Global redzone: f9 Global init order: f6 Poisoned by user: f7 Container overflow: fc Array cookie: ac Intra object redzone: bb ASan internal: fe Left alloca redzone: ca Right alloca redzone: cb Shadow gap: cc </quote> I'm also adding the missing "Fixes" tag and setting just .name to NULL, as doing it that way is more compact (the compiler will zero out everything else) and the table iterators look for .name being NULL as the sentinel marking the end of the table. Fixes: 0a507af ("perf tests: Add parse metric test for ipc metric") Signed-off-by: Thomas Richter <tmricht@linux.ibm.com> Reviewed-by: Sumanth Korikkar <sumanthk@linux.ibm.com> Acked-by: Ian Rogers <irogers@google.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Sven Schnelle <svens@linux.ibm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Link: http://lore.kernel.org/lkml/20200825071211.16959-1-tmricht@linux.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

The aliases were never released causing the following leaks: Indirect leak of 1224 byte(s) in 9 object(s) allocated from: #0 0x7feefb830628 in malloc (/lib/x86_64-linux-gnu/libasan.so.5+0x107628) #1 0x56332c8f1b62 in __perf_pmu__new_alias util/pmu.c:322 #2 0x56332c8f401f in pmu_add_cpu_aliases_map util/pmu.c:778 #3 0x56332c792ce9 in __test__pmu_event_aliases tests/pmu-events.c:295 #4 0x56332c792ce9 in test_aliases tests/pmu-events.c:367 #5 0x56332c76a09b in run_test tests/builtin-test.c:410 #6 0x56332c76a09b in test_and_print tests/builtin-test.c:440 #7 0x56332c76ce69 in __cmd_test tests/builtin-test.c:695 #8 0x56332c76ce69 in cmd_test tests/builtin-test.c:807 #9 0x56332c7d2214 in run_builtin /home/namhyung/project/linux/tools/perf/perf.c:312 #10 0x56332c6701a8 in handle_internal_command /home/namhyung/project/linux/tools/perf/perf.c:364 #11 0x56332c6701a8 in run_argv /home/namhyung/project/linux/tools/perf/perf.c:408 #12 0x56332c6701a8 in main /home/namhyung/project/linux/tools/perf/perf.c:538 #13 0x7feefb359cc9 in __libc_start_main ../csu/libc-start.c:308 Fixes: 956a783 ("perf test: Test pmu-events aliases") Signed-off-by: Namhyung Kim <namhyung@kernel.org> Reviewed-by: John Garry <john.garry@huawei.com> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lore.kernel.org/lkml/20200915031819.386559-11-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

The evsel->unit borrows a pointer of pmu event or alias instead of owns a string. But tool event (duration_time) passes a result of strdup() caused a leak. It was found by ASAN during metric test: Direct leak of 210 byte(s) in 70 object(s) allocated from: #0 0x7fe366fca0b5 in strdup (/lib/x86_64-linux-gnu/libasan.so.5+0x920b5) #1 0x559fbbcc6ea3 in add_event_tool util/parse-events.c:414 #2 0x559fbbcc6ea3 in parse_events_add_tool util/parse-events.c:1414 #3 0x559fbbd8474d in parse_events_parse util/parse-events.y:439 #4 0x559fbbcc95da in parse_events__scanner util/parse-events.c:2096 #5 0x559fbbcc95da in __parse_events util/parse-events.c:2141 #6 0x559fbbc28555 in check_parse_id tests/pmu-events.c:406 #7 0x559fbbc28555 in check_parse_id tests/pmu-events.c:393 #8 0x559fbbc28555 in check_parse_cpu tests/pmu-events.c:415 #9 0x559fbbc28555 in test_parsing tests/pmu-events.c:498 #10 0x559fbbc0109b in run_test tests/builtin-test.c:410 #11 0x559fbbc0109b in test_and_print tests/builtin-test.c:440 #12 0x559fbbc03e69 in __cmd_test tests/builtin-test.c:695 #13 0x559fbbc03e69 in cmd_test tests/builtin-test.c:807 #14 0x559fbbc691f4 in run_builtin /home/namhyung/project/linux/tools/perf/perf.c:312 #15 0x559fbbb071a8 in handle_internal_command /home/namhyung/project/linux/tools/perf/perf.c:364 #16 0x559fbbb071a8 in run_argv /home/namhyung/project/linux/tools/perf/perf.c:408 #17 0x559fbbb071a8 in main /home/namhyung/project/linux/tools/perf/perf.c:538 #18 0x7fe366b68cc9 in __libc_start_main ../csu/libc-start.c:308 Fixes: f0fbb11 ("perf stat: Implement duration_time as a proper event") Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lore.kernel.org/lkml/20200915031819.386559-6-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

The test_generic_metric() missed to release entries in the pctx. Asan reported following leak (and more): Direct leak of 128 byte(s) in 1 object(s) allocated from: #0 0x7f4c9396980e in calloc (/lib/x86_64-linux-gnu/libasan.so.5+0x10780e) #1 0x55f7e748cc14 in hashmap_grow (/home/namhyung/project/linux/tools/perf/perf+0x90cc14) #2 0x55f7e748d497 in hashmap__insert (/home/namhyung/project/linux/tools/perf/perf+0x90d497) #3 0x55f7e7341667 in hashmap__set /home/namhyung/project/linux/tools/perf/util/hashmap.h:111 #4 0x55f7e7341667 in expr__add_ref util/expr.c:120 #5 0x55f7e7292436 in prepare_metric util/stat-shadow.c:783 #6 0x55f7e729556d in test_generic_metric util/stat-shadow.c:858 #7 0x55f7e712390b in compute_single tests/parse-metric.c:128 #8 0x55f7e712390b in __compute_metric tests/parse-metric.c:180 #9 0x55f7e712446d in compute_metric tests/parse-metric.c:196 #10 0x55f7e712446d in test_dcache_l2 tests/parse-metric.c:295 #11 0x55f7e712446d in test__parse_metric tests/parse-metric.c:355 #12 0x55f7e70be09b in run_test tests/builtin-test.c:410 #13 0x55f7e70be09b in test_and_print tests/builtin-test.c:440 #14 0x55f7e70c101a in __cmd_test tests/builtin-test.c:661 #15 0x55f7e70c101a in cmd_test tests/builtin-test.c:807 #16 0x55f7e7126214 in run_builtin /home/namhyung/project/linux/tools/perf/perf.c:312 #17 0x55f7e6fc41a8 in handle_internal_command /home/namhyung/project/linux/tools/perf/perf.c:364 #18 0x55f7e6fc41a8 in run_argv /home/namhyung/project/linux/tools/perf/perf.c:408 #19 0x55f7e6fc41a8 in main /home/namhyung/project/linux/tools/perf/perf.c:538 #20 0x7f4c93492cc9 in __libc_start_main ../csu/libc-start.c:308 Fixes: 6d432c4 ("perf tools: Add test_generic_metric function") Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lore.kernel.org/lkml/20200915031819.386559-8-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

The metricgroup__add_metric() can find multiple match for a metric group and it's possible to fail. Also it can fail in the middle like in resolve_metric() even for single metric. In those cases, the intermediate list and ids will be leaked like: Direct leak of 3 byte(s) in 1 object(s) allocated from: #0 0x7f4c938f40b5 in strdup (/lib/x86_64-linux-gnu/libasan.so.5+0x920b5) #1 0x55f7e71c1bef in __add_metric util/metricgroup.c:683 #2 0x55f7e71c31d0 in add_metric util/metricgroup.c:906 #3 0x55f7e71c3844 in metricgroup__add_metric util/metricgroup.c:940 #4 0x55f7e71c488d in metricgroup__add_metric_list util/metricgroup.c:993 #5 0x55f7e71c488d in parse_groups util/metricgroup.c:1045 #6 0x55f7e71c60a4 in metricgroup__parse_groups_test util/metricgroup.c:1087 #7 0x55f7e71235ae in __compute_metric tests/parse-metric.c:164 #8 0x55f7e7124650 in compute_metric tests/parse-metric.c:196 #9 0x55f7e7124650 in test_recursion_fail tests/parse-metric.c:318 #10 0x55f7e7124650 in test__parse_metric tests/parse-metric.c:356 #11 0x55f7e70be09b in run_test tests/builtin-test.c:410 #12 0x55f7e70be09b in test_and_print tests/builtin-test.c:440 #13 0x55f7e70c101a in __cmd_test tests/builtin-test.c:661 #14 0x55f7e70c101a in cmd_test tests/builtin-test.c:807 #15 0x55f7e7126214 in run_builtin /home/namhyung/project/linux/tools/perf/perf.c:312 #16 0x55f7e6fc41a8 in handle_internal_command /home/namhyung/project/linux/tools/perf/perf.c:364 #17 0x55f7e6fc41a8 in run_argv /home/namhyung/project/linux/tools/perf/perf.c:408 #18 0x55f7e6fc41a8 in main /home/namhyung/project/linux/tools/perf/perf.c:538 #19 0x7f4c93492cc9 in __libc_start_main ../csu/libc-start.c:308 Fixes: 83de0b7 ("perf metric: Collect referenced metrics in struct metric_ref_node") Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lore.kernel.org/lkml/20200915031819.386559-9-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

The following leaks were detected by ASAN: Indirect leak of 360 byte(s) in 9 object(s) allocated from: #0 0x7fecc305180e in calloc (/lib/x86_64-linux-gnu/libasan.so.5+0x10780e) #1 0x560578f6dce5 in perf_pmu__new_format util/pmu.c:1333 #2 0x560578f752fc in perf_pmu_parse util/pmu.y:59 #3 0x560578f6a8b7 in perf_pmu__format_parse util/pmu.c:73 #4 0x560578e07045 in test__pmu tests/pmu.c:155 #5 0x560578de109b in run_test tests/builtin-test.c:410 #6 0x560578de109b in test_and_print tests/builtin-test.c:440 #7 0x560578de401a in __cmd_test tests/builtin-test.c:661 #8 0x560578de401a in cmd_test tests/builtin-test.c:807 #9 0x560578e49354 in run_builtin /home/namhyung/project/linux/tools/perf/perf.c:312 #10 0x560578ce71a8 in handle_internal_command /home/namhyung/project/linux/tools/perf/perf.c:364 #11 0x560578ce71a8 in run_argv /home/namhyung/project/linux/tools/perf/perf.c:408 #12 0x560578ce71a8 in main /home/namhyung/project/linux/tools/perf/perf.c:538 #13 0x7fecc2b7acc9 in __libc_start_main ../csu/libc-start.c:308 Fixes: cff7f95 ("perf tests: Move pmu tests into separate object") Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lore.kernel.org/lkml/20200915031819.386559-12-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

The following call trace shows a deadlock issue due to recursive locking of mutex "device_mutex". First lock acquire is in target_for_each_device() and second in target_free_device(). PID: 148266 TASK: ffff8be21ffb5d00 CPU: 10 COMMAND: "iscsi_ttx" #0 [ffffa2bfc9ec3b18] __schedule at ffffffffa8060e7f #1 [ffffa2bfc9ec3ba0] schedule at ffffffffa8061224 #2 [ffffa2bfc9ec3bb8] schedule_preempt_disabled at ffffffffa80615ee #3 [ffffa2bfc9ec3bc8] __mutex_lock at ffffffffa8062fd7 #4 [ffffa2bfc9ec3c40] __mutex_lock_slowpath at ffffffffa80631d3 #5 [ffffa2bfc9ec3c50] mutex_lock at ffffffffa806320c #6 [ffffa2bfc9ec3c68] target_free_device at ffffffffc0935998 [target_core_mod] #7 [ffffa2bfc9ec3c90] target_core_dev_release at ffffffffc092f975 [target_core_mod] #8 [ffffa2bfc9ec3ca0] config_item_put at ffffffffa79d250f #9 [ffffa2bfc9ec3cd0] config_item_put at ffffffffa79d2583 #10 [ffffa2bfc9ec3ce0] target_devices_idr_iter at ffffffffc0933f3a [target_core_mod] #11 [ffffa2bfc9ec3d00] idr_for_each at ffffffffa803f6fc #12 [ffffa2bfc9ec3d60] target_for_each_device at ffffffffc0935670 [target_core_mod] #13 [ffffa2bfc9ec3d98] transport_deregister_session at ffffffffc0946408 [target_core_mod] #14 [ffffa2bfc9ec3dc8] iscsit_close_session at ffffffffc09a44a6 [iscsi_target_mod] #15 [ffffa2bfc9ec3df0] iscsit_close_connection at ffffffffc09a4a88 [iscsi_target_mod] #16 [ffffa2bfc9ec3df8] finish_task_switch at ffffffffa76e5d07 #17 [ffffa2bfc9ec3e78] iscsit_take_action_for_connection_exit at ffffffffc0991c23 [iscsi_target_mod] #18 [ffffa2bfc9ec3ea0] iscsi_target_tx_thread at ffffffffc09a403b [iscsi_target_mod] #19 [ffffa2bfc9ec3f08] kthread at ffffffffa76d8080 #20 [ffffa2bfc9ec3f50] ret_from_fork at ffffffffa8200364 Fixes: 36d4cb4 ("scsi: target: Avoid that EXTENDED COPY commands trigger lock inversion") Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com> Link: https://lore.kernel.org/r/20230918225848.66463-1-junxiao.bi@oracle.com Reviewed-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Generating metrics llc_code_read_mpi_demand_plus_prefetch, llc_data_read_mpi_demand_plus_prefetch, llc_miss_local_memory_bandwidth_read, llc_miss_local_memory_bandwidth_write, nllc_miss_remote_memory_bandwidth_read, memory_bandwidth_read, memory_bandwidth_write, uncore_frequency, upi_data_transmit_bw, C2_Pkg_Residency, C3_Core_Residency, C3_Pkg_Residency, C6_Core_Residency, C6_Pkg_Residency, C7_Core_Residency, C7_Pkg_Residency, UNCORE_FREQ and tma_info_system_socket_clks would trigger an address sanitizer heap-buffer-overflows on a SkylakeX. ``` ==2567752==ERROR: AddressSanitizer: heap-buffer-overflow on address 0x5020003ed098 at pc 0x5621a816654e bp 0x7fffb55d4da0 sp 0x7fffb55d4d98 READ of size 4 at 0x5020003eee78 thread T0 #0 0x558265d6654d in aggr_cpu_id__is_empty tools/perf/util/cpumap.c:694:12 #1 0x558265c914da in perf_stat__get_aggr tools/perf/builtin-stat.c:1490:6 #2 0x558265c914da in perf_stat__get_global_cached tools/perf/builtin-stat.c:1530:9 #3 0x558265e53290 in should_skip_zero_counter tools/perf/util/stat-display.c:947:31 #4 0x558265e53290 in print_counter_aggrdata tools/perf/util/stat-display.c:985:18 #5 0x558265e51931 in print_counter tools/perf/util/stat-display.c:1110:3 #6 0x558265e51931 in evlist__print_counters tools/perf/util/stat-display.c:1571:5 #7 0x558265c8ec87 in print_counters tools/perf/builtin-stat.c:981:2 #8 0x558265c8cc71 in cmd_stat tools/perf/builtin-stat.c:2837:3 #9 0x558265bb9bd4 in run_builtin tools/perf/perf.c:323:11 #10 0x558265bb98eb in handle_internal_command tools/perf/perf.c:377:8 #11 0x558265bb9389 in run_argv tools/perf/perf.c:421:2 #12 0x558265bb9389 in main tools/perf/perf.c:537:3 ``` The issue was the use of testing a cpumap with NULL rather than using empty, as a map containing the dummy value isn't NULL and the -1 results in an empty aggr map being allocated which legitimately overflows when any member is accessed. Fixes: 8a96f45 ("perf stat: Avoid SEGV if core.cpus isn't set") Signed-off-by: Ian Rogers <irogers@google.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/r/20230906003912.3317462-1-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Fuzzing found that an invalid tracepoint name would create a memory leak with an address sanitizer build: ``` $ perf stat -e '*:o/' true event syntax error: '*:o/' \___ parser error Run 'perf list' for a list of valid events Usage: perf stat [<options>] [<command>] -e, --event <event> event selector. use 'perf list' to list available events ================================================================= ==59380==ERROR: LeakSanitizer: detected memory leaks Direct leak of 4 byte(s) in 2 object(s) allocated from: #0 0x7f38ac07077b in __interceptor_strdup ../../../../src/libsanitizer/asan/asan_interceptors.cpp:439 #1 0x55f2f41be73b in str util/parse-events.l:49 #2 0x55f2f41d08e8 in parse_events_lex util/parse-events.l:338 #3 0x55f2f41dc3b1 in parse_events_parse util/parse-events-bison.c:1464 #4 0x55f2f410b8b3 in parse_events__scanner util/parse-events.c:1822 #5 0x55f2f410d1b9 in __parse_events util/parse-events.c:2094 #6 0x55f2f410e57f in parse_events_option util/parse-events.c:2279 #7 0x55f2f4427b56 in get_value tools/lib/subcmd/parse-options.c:251 #8 0x55f2f4428d98 in parse_short_opt tools/lib/subcmd/parse-options.c:351 #9 0x55f2f4429d80 in parse_options_step tools/lib/subcmd/parse-options.c:539 #10 0x55f2f442acb9 in parse_options_subcommand tools/lib/subcmd/parse-options.c:654 #11 0x55f2f3ec99fc in cmd_stat tools/perf/builtin-stat.c:2501 #12 0x55f2f4093289 in run_builtin tools/perf/perf.c:322 #13 0x55f2f40937f5 in handle_internal_command tools/perf/perf.c:375 #14 0x55f2f4093bbd in run_argv tools/perf/perf.c:419 #15 0x55f2f409412b in main tools/perf/perf.c:535 SUMMARY: AddressSanitizer: 4 byte(s) leaked in 2 allocation(s). ``` Fix by adding the missing destructor. Fixes: 865582c ("perf tools: Adds the tracepoint name parsing support") Signed-off-by: Ian Rogers <irogers@google.com> Cc: He Kuang <hekuang@huawei.com> Link: https://lore.kernel.org/r/20230914164028.363220-1-irogers@google.com Signed-off-by: Namhyung Kim <namhyung@kernel.org>

KMSAN reported the following uninit-value access issue: ===================================================== BUG: KMSAN: uninit-value in ppp_sync_input drivers/net/ppp/ppp_synctty.c:690 [inline] BUG: KMSAN: uninit-value in ppp_sync_receive+0xdc9/0xe70 drivers/net/ppp/ppp_synctty.c:334 ppp_sync_input drivers/net/ppp/ppp_synctty.c:690 [inline] ppp_sync_receive+0xdc9/0xe70 drivers/net/ppp/ppp_synctty.c:334 tiocsti+0x328/0x450 drivers/tty/tty_io.c:2295 tty_ioctl+0x808/0x1920 drivers/tty/tty_io.c:2694 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:871 [inline] __se_sys_ioctl+0x211/0x400 fs/ioctl.c:857 __x64_sys_ioctl+0x97/0xe0 fs/ioctl.c:857 do_syscall_x64 arch/x86/entry/common.c:51 [inline] do_syscall_64+0x44/0x110 arch/x86/entry/common.c:82 entry_SYSCALL_64_after_hwframe+0x63/0x6b Uninit was created at: __alloc_pages+0x75d/0xe80 mm/page_alloc.c:4591 __alloc_pages_node include/linux/gfp.h:238 [inline] alloc_pages_node include/linux/gfp.h:261 [inline] __page_frag_cache_refill+0x9a/0x2c0 mm/page_alloc.c:4691 page_frag_alloc_align+0x91/0x5d0 mm/page_alloc.c:4722 page_frag_alloc include/linux/gfp.h:322 [inline] __netdev_alloc_skb+0x215/0x6d0 net/core/skbuff.c:728 netdev_alloc_skb include/linux/skbuff.h:3225 [inline] dev_alloc_skb include/linux/skbuff.h:3238 [inline] ppp_sync_input drivers/net/ppp/ppp_synctty.c:669 [inline] ppp_sync_receive+0x237/0xe70 drivers/net/ppp/ppp_synctty.c:334 tiocsti+0x328/0x450 drivers/tty/tty_io.c:2295 tty_ioctl+0x808/0x1920 drivers/tty/tty_io.c:2694 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:871 [inline] __se_sys_ioctl+0x211/0x400 fs/ioctl.c:857 __x64_sys_ioctl+0x97/0xe0 fs/ioctl.c:857 do_syscall_x64 arch/x86/entry/common.c:51 [inline] do_syscall_64+0x44/0x110 arch/x86/entry/common.c:82 entry_SYSCALL_64_after_hwframe+0x63/0x6b CPU: 0 PID: 12950 Comm: syz-executor.1 Not tainted 6.6.0-14500-g1c41041124bd #10 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.2-1.fc38 04/01/2014 ===================================================== ppp_sync_input() checks the first 2 bytes of the data are PPP_ALLSTATIONS and PPP_UI. However, if the data length is 1 and the first byte is PPP_ALLSTATIONS, an access to an uninitialized value occurs when checking PPP_UI. This patch resolves this issue by checking the data length. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Shigeru Yoshida <syoshida@redhat.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>

KMSAN reported the following kernel-infoleak issue: ===================================================== BUG: KMSAN: kernel-infoleak in instrument_copy_to_user include/linux/instrumented.h:114 [inline] BUG: KMSAN: kernel-infoleak in copy_to_user_iter lib/iov_iter.c:24 [inline] BUG: KMSAN: kernel-infoleak in iterate_ubuf include/linux/iov_iter.h:29 [inline] BUG: KMSAN: kernel-infoleak in iterate_and_advance2 include/linux/iov_iter.h:245 [inline] BUG: KMSAN: kernel-infoleak in iterate_and_advance include/linux/iov_iter.h:271 [inline] BUG: KMSAN: kernel-infoleak in _copy_to_iter+0x4ec/0x2bc0 lib/iov_iter.c:186 instrument_copy_to_user include/linux/instrumented.h:114 [inline] copy_to_user_iter lib/iov_iter.c:24 [inline] iterate_ubuf include/linux/iov_iter.h:29 [inline] iterate_and_advance2 include/linux/iov_iter.h:245 [inline] iterate_and_advance include/linux/iov_iter.h:271 [inline] _copy_to_iter+0x4ec/0x2bc0 lib/iov_iter.c:186 copy_to_iter include/linux/uio.h:197 [inline] simple_copy_to_iter net/core/datagram.c:532 [inline] __skb_datagram_iter.5+0x148/0xe30 net/core/datagram.c:420 skb_copy_datagram_iter+0x52/0x210 net/core/datagram.c:546 skb_copy_datagram_msg include/linux/skbuff.h:3960 [inline] netlink_recvmsg+0x43d/0x1630 net/netlink/af_netlink.c:1967 sock_recvmsg_nosec net/socket.c:1044 [inline] sock_recvmsg net/socket.c:1066 [inline] __sys_recvfrom+0x476/0x860 net/socket.c:2246 __do_sys_recvfrom net/socket.c:2264 [inline] __se_sys_recvfrom net/socket.c:2260 [inline] __x64_sys_recvfrom+0x130/0x200 net/socket.c:2260 do_syscall_x64 arch/x86/entry/common.c:51 [inline] do_syscall_64+0x44/0x110 arch/x86/entry/common.c:82 entry_SYSCALL_64_after_hwframe+0x63/0x6b Uninit was created at: slab_post_alloc_hook+0x103/0x9e0 mm/slab.h:768 slab_alloc_node mm/slub.c:3478 [inline] kmem_cache_alloc_node+0x5f7/0xb50 mm/slub.c:3523 kmalloc_reserve+0x13c/0x4a0 net/core/skbuff.c:560 __alloc_skb+0x2fd/0x770 net/core/skbuff.c:651 alloc_skb include/linux/skbuff.h:1286 [inline] tipc_tlv_alloc net/tipc/netlink_compat.c:156 [inline] tipc_get_err_tlv+0x90/0x5d0 net/tipc/netlink_compat.c:170 tipc_nl_compat_recv+0x1042/0x15d0 net/tipc/netlink_compat.c:1324 genl_family_rcv_msg_doit net/netlink/genetlink.c:972 [inline] genl_family_rcv_msg net/netlink/genetlink.c:1052 [inline] genl_rcv_msg+0x1220/0x12c0 net/netlink/genetlink.c:1067 netlink_rcv_skb+0x4a4/0x6a0 net/netlink/af_netlink.c:2545 genl_rcv+0x41/0x60 net/netlink/genetlink.c:1076 netlink_unicast_kernel net/netlink/af_netlink.c:1342 [inline] netlink_unicast+0xf4b/0x1230 net/netlink/af_netlink.c:1368 netlink_sendmsg+0x1242/0x1420 net/netlink/af_netlink.c:1910 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg net/socket.c:745 [inline] ____sys_sendmsg+0x997/0xd60 net/socket.c:2588 ___sys_sendmsg+0x271/0x3b0 net/socket.c:2642 __sys_sendmsg net/socket.c:2671 [inline] __do_sys_sendmsg net/socket.c:2680 [inline] __se_sys_sendmsg net/socket.c:2678 [inline] __x64_sys_sendmsg+0x2fa/0x4a0 net/socket.c:2678 do_syscall_x64 arch/x86/entry/common.c:51 [inline] do_syscall_64+0x44/0x110 arch/x86/entry/common.c:82 entry_SYSCALL_64_after_hwframe+0x63/0x6b Bytes 34-35 of 36 are uninitialized Memory access of size 36 starts at ffff88802d464a00 Data copied to user address 00007ff55033c0a0 CPU: 0 PID: 30322 Comm: syz-executor.0 Not tainted 6.6.0-14500-g1c41041124bd #10 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.2-1.fc38 04/01/2014 ===================================================== tipc_add_tlv() puts TLV descriptor and value onto `skb`. This size is calculated with TLV_SPACE() macro. It adds the size of struct tlv_desc and the length of TLV value passed as an argument, and aligns the result to a multiple of TLV_ALIGNTO, i.e., a multiple of 4 bytes. If the size of struct tlv_desc plus the length of TLV value is not aligned, the current implementation leaves the remaining bytes uninitialized. This is the cause of the above kernel-infoleak issue. This patch resolves this issue by clearing data up to an aligned size. Fixes: d0796d1 ("tipc: convert legacy nl bearer dump to nl compat") Signed-off-by: Shigeru Yoshida <syoshida@redhat.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>

This allows it to break the following circular locking dependency. Aug 10 07:01:29 dg1test kernel: ====================================================== Aug 10 07:01:29 dg1test kernel: WARNING: possible circular locking dependency detected Aug 10 07:01:29 dg1test kernel: 6.4.0-rc7+ #10 Not tainted Aug 10 07:01:29 dg1test kernel: ------------------------------------------------------ Aug 10 07:01:29 dg1test kernel: wireplumber/2236 is trying to acquire lock: Aug 10 07:01:29 dg1test kernel: ffff8fca5320da18 (&fctx->lock){-...}-{2:2}, at: nouveau_fence_wait_uevent_handler+0x2b/0x100 [nouveau] Aug 10 07:01:29 dg1test kernel: but task is already holding lock: Aug 10 07:01:29 dg1test kernel: ffff8fca41208610 (&event->list_lock#2){-...}-{2:2}, at: nvkm_event_ntfy+0x50/0xf0 [nouveau] Aug 10 07:01:29 dg1test kernel: which lock already depends on the new lock. Aug 10 07:01:29 dg1test kernel: the existing dependency chain (in reverse order) is: Aug 10 07:01:29 dg1test kernel: -> #3 (&event->list_lock#2){-...}-{2:2}: Aug 10 07:01:29 dg1test kernel: _raw_spin_lock_irqsave+0x4b/0x70 Aug 10 07:01:29 dg1test kernel: nvkm_event_ntfy+0x50/0xf0 [nouveau] Aug 10 07:01:29 dg1test kernel: ga100_fifo_nonstall_intr+0x24/0x30 [nouveau] Aug 10 07:01:29 dg1test kernel: nvkm_intr+0x12c/0x240 [nouveau] Aug 10 07:01:29 dg1test kernel: __handle_irq_event_percpu+0x88/0x240 Aug 10 07:01:29 dg1test kernel: handle_irq_event+0x38/0x80 Aug 10 07:01:29 dg1test kernel: handle_edge_irq+0xa3/0x240 Aug 10 07:01:29 dg1test kernel: __common_interrupt+0x72/0x160 Aug 10 07:01:29 dg1test kernel: common_interrupt+0x60/0xe0 Aug 10 07:01:29 dg1test kernel: asm_common_interrupt+0x26/0x40 Aug 10 07:01:29 dg1test kernel: -> #2 (&device->intr.lock){-...}-{2:2}: Aug 10 07:01:29 dg1test kernel: _raw_spin_lock_irqsave+0x4b/0x70 Aug 10 07:01:29 dg1test kernel: nvkm_inth_allow+0x2c/0x80 [nouveau] Aug 10 07:01:29 dg1test kernel: nvkm_event_ntfy_state+0x181/0x250 [nouveau] Aug 10 07:01:29 dg1test kernel: nvkm_event_ntfy_allow+0x63/0xd0 [nouveau] Aug 10 07:01:29 dg1test kernel: nvkm_uevent_mthd+0x4d/0x70 [nouveau] Aug 10 07:01:29 dg1test kernel: nvkm_ioctl+0x10b/0x250 [nouveau] Aug 10 07:01:29 dg1test kernel: nvif_object_mthd+0xa8/0x1f0 [nouveau] Aug 10 07:01:29 dg1test kernel: nvif_event_allow+0x2a/0xa0 [nouveau] Aug 10 07:01:29 dg1test kernel: nouveau_fence_enable_signaling+0x78/0x80 [nouveau] Aug 10 07:01:29 dg1test kernel: __dma_fence_enable_signaling+0x5e/0x100 Aug 10 07:01:29 dg1test kernel: dma_fence_add_callback+0x4b/0xd0 Aug 10 07:01:29 dg1test kernel: nouveau_cli_work_queue+0xae/0x110 [nouveau] Aug 10 07:01:29 dg1test kernel: nouveau_gem_object_close+0x1d1/0x2a0 [nouveau] Aug 10 07:01:29 dg1test kernel: drm_gem_handle_delete+0x70/0xe0 [drm] Aug 10 07:01:29 dg1test kernel: drm_ioctl_kernel+0xa5/0x150 [drm] Aug 10 07:01:29 dg1test kernel: drm_ioctl+0x256/0x490 [drm] Aug 10 07:01:29 dg1test kernel: nouveau_drm_ioctl+0x5a/0xb0 [nouveau] Aug 10 07:01:29 dg1test kernel: __x64_sys_ioctl+0x91/0xd0 Aug 10 07:01:29 dg1test kernel: do_syscall_64+0x3c/0x90 Aug 10 07:01:29 dg1test kernel: entry_SYSCALL_64_after_hwframe+0x72/0xdc Aug 10 07:01:29 dg1test kernel: -> #1 (&event->refs_lock#4){....}-{2:2}: Aug 10 07:01:29 dg1test kernel: _raw_spin_lock_irqsave+0x4b/0x70 Aug 10 07:01:29 dg1test kernel: nvkm_event_ntfy_state+0x37/0x250 [nouveau] Aug 10 07:01:29 dg1test kernel: nvkm_event_ntfy_allow+0x63/0xd0 [nouveau] Aug 10 07:01:29 dg1test kernel: nvkm_uevent_mthd+0x4d/0x70 [nouveau] Aug 10 07:01:29 dg1test kernel: nvkm_ioctl+0x10b/0x250 [nouveau] Aug 10 07:01:29 dg1test kernel: nvif_object_mthd+0xa8/0x1f0 [nouveau] Aug 10 07:01:29 dg1test kernel: nvif_event_allow+0x2a/0xa0 [nouveau] Aug 10 07:01:29 dg1test kernel: nouveau_fence_enable_signaling+0x78/0x80 [nouveau] Aug 10 07:01:29 dg1test kernel: __dma_fence_enable_signaling+0x5e/0x100 Aug 10 07:01:29 dg1test kernel: dma_fence_add_callback+0x4b/0xd0 Aug 10 07:01:29 dg1test kernel: nouveau_cli_work_queue+0xae/0x110 [nouveau] Aug 10 07:01:29 dg1test kernel: nouveau_gem_object_close+0x1d1/0x2a0 [nouveau] Aug 10 07:01:29 dg1test kernel: drm_gem_handle_delete+0x70/0xe0 [drm] Aug 10 07:01:29 dg1test kernel: drm_ioctl_kernel+0xa5/0x150 [drm] Aug 10 07:01:29 dg1test kernel: drm_ioctl+0x256/0x490 [drm] Aug 10 07:01:29 dg1test kernel: nouveau_drm_ioctl+0x5a/0xb0 [nouveau] Aug 10 07:01:29 dg1test kernel: __x64_sys_ioctl+0x91/0xd0 Aug 10 07:01:29 dg1test kernel: do_syscall_64+0x3c/0x90 Aug 10 07:01:29 dg1test kernel: entry_SYSCALL_64_after_hwframe+0x72/0xdc Aug 10 07:01:29 dg1test kernel: -> #0 (&fctx->lock){-...}-{2:2}: Aug 10 07:01:29 dg1test kernel: __lock_acquire+0x14e3/0x2240 Aug 10 07:01:29 dg1test kernel: lock_acquire+0xc8/0x2a0 Aug 10 07:01:29 dg1test kernel: _raw_spin_lock_irqsave+0x4b/0x70 Aug 10 07:01:29 dg1test kernel: nouveau_fence_wait_uevent_handler+0x2b/0x100 [nouveau] Aug 10 07:01:29 dg1test kernel: nvkm_client_event+0xf/0x20 [nouveau] Aug 10 07:01:29 dg1test kernel: nvkm_event_ntfy+0x9b/0xf0 [nouveau] Aug 10 07:01:29 dg1test kernel: ga100_fifo_nonstall_intr+0x24/0x30 [nouveau] Aug 10 07:01:29 dg1test kernel: nvkm_intr+0x12c/0x240 [nouveau] Aug 10 07:01:29 dg1test kernel: __handle_irq_event_percpu+0x88/0x240 Aug 10 07:01:29 dg1test kernel: handle_irq_event+0x38/0x80 Aug 10 07:01:29 dg1test kernel: handle_edge_irq+0xa3/0x240 Aug 10 07:01:29 dg1test kernel: __common_interrupt+0x72/0x160 Aug 10 07:01:29 dg1test kernel: common_interrupt+0x60/0xe0 Aug 10 07:01:29 dg1test kernel: asm_common_interrupt+0x26/0x40 Aug 10 07:01:29 dg1test kernel: other info that might help us debug this: Aug 10 07:01:29 dg1test kernel: Chain exists of: &fctx->lock --> &device->intr.lock --> &event->list_lock#2 Aug 10 07:01:29 dg1test kernel: Possible unsafe locking scenario: Aug 10 07:01:29 dg1test kernel: CPU0 CPU1 Aug 10 07:01:29 dg1test kernel: ---- ---- Aug 10 07:01:29 dg1test kernel: lock(&event->list_lock#2); Aug 10 07:01:29 dg1test kernel: lock(&device->intr.lock); Aug 10 07:01:29 dg1test kernel: lock(&event->list_lock#2); Aug 10 07:01:29 dg1test kernel: lock(&fctx->lock); Aug 10 07:01:29 dg1test kernel: *** DEADLOCK *** Aug 10 07:01:29 dg1test kernel: 2 locks held by wireplumber/2236: Aug 10 07:01:29 dg1test kernel: #0: ffff8fca53177bf8 (&device->intr.lock){-...}-{2:2}, at: nvkm_intr+0x29/0x240 [nouveau] Aug 10 07:01:29 dg1test kernel: #1: ffff8fca41208610 (&event->list_lock#2){-...}-{2:2}, at: nvkm_event_ntfy+0x50/0xf0 [nouveau] Aug 10 07:01:29 dg1test kernel: stack backtrace: Aug 10 07:01:29 dg1test kernel: CPU: 6 PID: 2236 Comm: wireplumber Not tainted 6.4.0-rc7+ #10 Aug 10 07:01:29 dg1test kernel: Hardware name: Gigabyte Technology Co., Ltd. Z390 I AORUS PRO WIFI/Z390 I AORUS PRO WIFI-CF, BIOS F8 11/05/2021 Aug 10 07:01:29 dg1test kernel: Call Trace: Aug 10 07:01:29 dg1test kernel: <TASK> Aug 10 07:01:29 dg1test kernel: dump_stack_lvl+0x5b/0x90 Aug 10 07:01:29 dg1test kernel: check_noncircular+0xe2/0x110 Aug 10 07:01:29 dg1test kernel: __lock_acquire+0x14e3/0x2240 Aug 10 07:01:29 dg1test kernel: lock_acquire+0xc8/0x2a0 Aug 10 07:01:29 dg1test kernel: ? nouveau_fence_wait_uevent_handler+0x2b/0x100 [nouveau] Aug 10 07:01:29 dg1test kernel: ? lock_acquire+0xc8/0x2a0 Aug 10 07:01:29 dg1test kernel: _raw_spin_lock_irqsave+0x4b/0x70 Aug 10 07:01:29 dg1test kernel: ? nouveau_fence_wait_uevent_handler+0x2b/0x100 [nouveau] Aug 10 07:01:29 dg1test kernel: nouveau_fence_wait_uevent_handler+0x2b/0x100 [nouveau] Aug 10 07:01:29 dg1test kernel: nvkm_client_event+0xf/0x20 [nouveau] Aug 10 07:01:29 dg1test kernel: nvkm_event_ntfy+0x9b/0xf0 [nouveau] Aug 10 07:01:29 dg1test kernel: ga100_fifo_nonstall_intr+0x24/0x30 [nouveau] Aug 10 07:01:29 dg1test kernel: nvkm_intr+0x12c/0x240 [nouveau] Aug 10 07:01:29 dg1test kernel: __handle_irq_event_percpu+0x88/0x240 Aug 10 07:01:29 dg1test kernel: handle_irq_event+0x38/0x80 Aug 10 07:01:29 dg1test kernel: handle_edge_irq+0xa3/0x240 Aug 10 07:01:29 dg1test kernel: __common_interrupt+0x72/0x160 Aug 10 07:01:29 dg1test kernel: common_interrupt+0x60/0xe0 Aug 10 07:01:29 dg1test kernel: asm_common_interrupt+0x26/0x40 Aug 10 07:01:29 dg1test kernel: RIP: 0033:0x7fb66174d700 Aug 10 07:01:29 dg1test kernel: Code: c1 e2 05 29 ca 8d 0c 10 0f be 07 84 c0 75 eb 89 c8 c3 0f 1f 84 00 00 00 00 00 f3 0f 1e fa e9 d7 0f fc ff 0f 1f 80 00 00 00 00 <f3> 0f 1e fa e9 c7 0f fc> Aug 10 07:01:29 dg1test kernel: RSP: 002b:00007ffdd3c48438 EFLAGS: 00000206 Aug 10 07:01:29 dg1test kernel: RAX: 000055bb758763c0 RBX: 000055bb758752c0 RCX: 00000000000028b0 Aug 10 07:01:29 dg1test kernel: RDX: 000055bb758752c0 RSI: 000055bb75887490 RDI: 000055bb75862950 Aug 10 07:01:29 dg1test kernel: RBP: 00007ffdd3c48490 R08: 000055bb75873b10 R09: 0000000000000001 Aug 10 07:01:29 dg1test kernel: R10: 0000000000000004 R11: 000055bb7587f000 R12: 000055bb75887490 Aug 10 07:01:29 dg1test kernel: R13: 000055bb757f6280 R14: 000055bb758875c0 R15: 000055bb757f6280 Aug 10 07:01:29 dg1test kernel: </TASK> Signed-off-by: Dave Airlie <airlied@redhat.com> Tested-by: Danilo Krummrich <dakr@redhat.com> Reviewed-by: Danilo Krummrich <dakr@redhat.com> Signed-off-by: Danilo Krummrich <dakr@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231107053255.2257079-1-airlied@gmail.com

…f-times' Eduard Zingerman says: ==================== verify callbacks as if they are called unknown number of times This series updates verifier logic for callback functions handling. Current master simulates callback body execution exactly once, which leads to verifier not detecting unsafe programs like below: static int unsafe_on_zero_iter_cb(__u32 idx, struct num_context *ctx) { ctx->i = 0; return 0; } SEC("?raw_tp") int unsafe_on_zero_iter(void *unused) { struct num_context loop_ctx = { .i = 32 }; __u8 choice_arr[2] = { 0, 1 }; bpf_loop(100, unsafe_on_zero_iter_cb, &loop_ctx, 0); return choice_arr[loop_ctx.i]; } This was reported previously in [0]. The basic idea of the fix is to schedule callback entry state for verification in env->head until some identical, previously visited state in current DFS state traversal is found. Same logic as with open coded iterators, and builds on top recent fixes [1] for those. The series is structured as follows: - patches #1,2,3 update strobemeta, xdp_synproxy selftests and bpf_loop_bench benchmark to allow convergence of the bpf_loop callback states; - patches #4,5 just shuffle the code a bit; - patch #6 is the main part of the series; - patch #7 adds test cases for #6; - patch #8 extend patch #6 with same speculative scalar widening logic, as used for open coded iterators; - patch #9 adds test cases for #8; - patch #10 extends patch #6 to track maximal number of callback executions specifically for bpf_loop(); - patch #11 adds test cases for #10. Veristat results comparing this series to master+patches #1,2,3 using selftests show the following difference: File Program States (A) States (B) States (DIFF) ------------------------- ------------- ---------- ---------- ------------- bpf_loop_bench.bpf.o benchmark 1 2 +1 (+100.00%) pyperf600_bpf_loop.bpf.o on_event 322 407 +85 (+26.40%) strobemeta_bpf_loop.bpf.o on_event 113 151 +38 (+33.63%) xdp_synproxy_kern.bpf.o syncookie_tc 341 291 -50 (-14.66%) xdp_synproxy_kern.bpf.o syncookie_xdp 344 301 -43 (-12.50%) Veristat results comparing this series to master using Tetragon BPF files [2] also show some differences. States diff varies from +2% to +15% on 23 programs out of 186, no new failures. Changelog: - V3 [5] -> V4, changes suggested by Andrii: - validate mark_chain_precision() result in patch #10; - renaming s/cumulative_callback_depth/callback_unroll_depth/. - V2 [4] -> V3: - fixes in expected log messages for test cases: - callback_result_precise; - parent_callee_saved_reg_precise_with_callback; - parent_stack_slot_precise_with_callback; - renamings (suggested by Alexei): - s/callback_iter_depth/cumulative_callback_depth/ - s/is_callback_iter_next/calls_callback/ - s/mark_callback_iter_next/mark_calls_callback/ - prepare_func_exit() updated to exit with -EFAULT when callee->in_callback_fn is true but calls_callback() is not true for callsite; - test case 'bpf_loop_iter_limit_nested' rewritten to use return value check instead of verifier log message checks (suggested by Alexei). - V1 [3] -> V2, changes suggested by Andrii: - small changes for error handling code in __check_func_call(); - callback body processing log is now matched in relevant verifier_subprog_precision.c tests; - R1 passed to bpf_loop() is now always marked as precise; - log level 2 message for bpf_loop() iteration termination instead of iteration depth messages; - __no_msg macro removed; - bpf_loop_iter_limit_nested updated to avoid using __no_msg; - commit message for patch #3 updated according to Alexei's request. [0] https://lore.kernel.org/bpf/CA+vRuzPChFNXmouzGG+wsy=6eMcfr1mFG0F3g7rbg-sedGKW3w@mail.gmail.com/ [1] https://lore.kernel.org/bpf/20231024000917.12153-1-eddyz87@gmail.com/ [2] git@github.com:cilium/tetragon.git [3] https://lore.kernel.org/bpf/20231116021803.9982-1-eddyz87@gmail.com/T/#t [4] https://lore.kernel.org/bpf/20231118013355.7943-1-eddyz87@gmail.com/T/#t [5] https://lore.kernel.org/bpf/20231120225945.11741-1-eddyz87@gmail.com/T/#t ==================== Link: https://lore.kernel.org/r/20231121020701.26440-1-eddyz87@gmail.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>

KMSAN reported the following uninit-value access issue: lo speed is unknown, defaulting to 1000 ===================================================== BUG: KMSAN: uninit-value in ib_get_width_and_speed drivers/infiniband/core/verbs.c:1889 [inline] BUG: KMSAN: uninit-value in ib_get_eth_speed+0x546/0xaf0 drivers/infiniband/core/verbs.c:1998 ib_get_width_and_speed drivers/infiniband/core/verbs.c:1889 [inline] ib_get_eth_speed+0x546/0xaf0 drivers/infiniband/core/verbs.c:1998 siw_query_port drivers/infiniband/sw/siw/siw_verbs.c:173 [inline] siw_get_port_immutable+0x6f/0x120 drivers/infiniband/sw/siw/siw_verbs.c:203 setup_port_data drivers/infiniband/core/device.c:848 [inline] setup_device drivers/infiniband/core/device.c:1244 [inline] ib_register_device+0x1589/0x1df0 drivers/infiniband/core/device.c:1383 siw_device_register drivers/infiniband/sw/siw/siw_main.c:72 [inline] siw_newlink+0x129e/0x13d0 drivers/infiniband/sw/siw/siw_main.c:490 nldev_newlink+0x8fd/0xa60 drivers/infiniband/core/nldev.c:1763 rdma_nl_rcv_skb drivers/infiniband/core/netlink.c:239 [inline] rdma_nl_rcv+0xe8a/0x1120 drivers/infiniband/core/netlink.c:259 netlink_unicast_kernel net/netlink/af_netlink.c:1342 [inline] netlink_unicast+0xf4b/0x1230 net/netlink/af_netlink.c:1368 netlink_sendmsg+0x1242/0x1420 net/netlink/af_netlink.c:1910 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg net/socket.c:745 [inline] ____sys_sendmsg+0x997/0xd60 net/socket.c:2588 ___sys_sendmsg+0x271/0x3b0 net/socket.c:2642 __sys_sendmsg net/socket.c:2671 [inline] __do_sys_sendmsg net/socket.c:2680 [inline] __se_sys_sendmsg net/socket.c:2678 [inline] __x64_sys_sendmsg+0x2fa/0x4a0 net/socket.c:2678 do_syscall_x64 arch/x86/entry/common.c:51 [inline] do_syscall_64+0x44/0x110 arch/x86/entry/common.c:82 entry_SYSCALL_64_after_hwframe+0x63/0x6b Local variable lksettings created at: ib_get_eth_speed+0x4b/0xaf0 drivers/infiniband/core/verbs.c:1974 siw_query_port drivers/infiniband/sw/siw/siw_verbs.c:173 [inline] siw_get_port_immutable+0x6f/0x120 drivers/infiniband/sw/siw/siw_verbs.c:203 CPU: 0 PID: 11257 Comm: syz-executor.1 Not tainted 6.6.0-14500-g1c41041124bd #10 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.2-1.fc38 04/01/2014 ===================================================== If __ethtool_get_link_ksettings() fails, `netdev_speed` is set to the default value, SPEED_1000. In this case, if `lanes` field of struct ethtool_link_ksettings is not initialized, an uninitialized value is passed to ib_get_width_and_speed(). This causes the above issue. This patch resolves the issue by initializing `lanes` to 0. Fixes: cb06b6b ("RDMA/core: Get IB width and speed from netdev") Signed-off-by: Shigeru Yoshida <syoshida@redhat.com> Link: https://lore.kernel.org/r/20231108143113.1360567-1-syoshida@redhat.com Signed-off-by: Leon Romanovsky <leon@kernel.org>

When creating ceq_0 during probing irdma, cqp.sc_cqp will be sent as a cqp_request to cqp->sc_cqp.sq_ring. If the request is pending when removing the irdma driver or unplugging its aux device, cqp.sc_cqp will be dereferenced as wrong struct in irdma_free_pending_cqp_request(). PID: 3669 TASK: ffff88aef892c000 CPU: 28 COMMAND: "kworker/28:0" #0 [fffffe0000549e38] crash_nmi_callback at ffffffff810e3a34 #1 [fffffe0000549e40] nmi_handle at ffffffff810788b2 #2 [fffffe0000549ea0] default_do_nmi at ffffffff8107938f #3 [fffffe0000549eb8] do_nmi at ffffffff81079582 #4 [fffffe0000549ef0] end_repeat_nmi at ffffffff82e016b4 [exception RIP: native_queued_spin_lock_slowpath+1291] RIP: ffffffff8127e72b RSP: ffff88aa841ef778 RFLAGS: 00000046 RAX: 0000000000000000 RBX: ffff88b01f849700 RCX: ffffffff8127e47e RDX: 0000000000000000 RSI: 0000000000000004 RDI: ffffffff83857ec0 RBP: ffff88afe3e4efc8 R8: ffffed15fc7c9dfa R9: ffffed15fc7c9dfa R10: 0000000000000001 R11: ffffed15fc7c9df9 R12: 0000000000740000 R13: ffff88b01f849708 R14: 0000000000000003 R15: ffffed1603f092e1 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0000 -- <NMI exception stack> -- #5 [ffff88aa841ef778] native_queued_spin_lock_slowpath at ffffffff8127e72b #6 [ffff88aa841ef7b0] _raw_spin_lock_irqsave at ffffffff82c22aa4 #7 [ffff88aa841ef7c8] __wake_up_common_lock at ffffffff81257363 #8 [ffff88aa841ef888] irdma_free_pending_cqp_request at ffffffffa0ba12cc [irdma] #9 [ffff88aa841ef958] irdma_cleanup_pending_cqp_op at ffffffffa0ba1469 [irdma] #10 [ffff88aa841ef9c0] irdma_ctrl_deinit_hw at ffffffffa0b2989f [irdma] #11 [ffff88aa841efa28] irdma_remove at ffffffffa0b252df [irdma] #12 [ffff88aa841efae8] auxiliary_bus_remove at ffffffff8219afdb #13 [ffff88aa841efb00] device_release_driver_internal at ffffffff821882e6 #14 [ffff88aa841efb38] bus_remove_device at ffffffff82184278 #15 [ffff88aa841efb88] device_del at ffffffff82179d23 #16 [ffff88aa841efc48] ice_unplug_aux_dev at ffffffffa0eb1c14 [ice] #17 [ffff88aa841efc68] ice_service_task at ffffffffa0d88201 [ice] #18 [ffff88aa841efde8] process_one_work at ffffffff811c589a #19 [ffff88aa841efe60] worker_thread at ffffffff811c71ff #20 [ffff88aa841eff10] kthread at ffffffff811d87a0 #21 [ffff88aa841eff50] ret_from_fork at ffffffff82e0022f Fixes: 44d9e52 ("RDMA/irdma: Implement device initialization definitions") Link: https://lore.kernel.org/r/20231130081415.891006-1-lishifeng@sangfor.com.cn Suggested-by: "Ismail, Mustafa" <mustafa.ismail@intel.com> Signed-off-by: Shifeng Li <lishifeng@sangfor.com.cn> Reviewed-by: Shiraz Saleem <shiraz.saleem@intel.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

The loop inside nfs_netfs_issue_read() currently does not disable interrupts while iterating through pages in the xarray to submit for NFS read. This is not safe though since after taking xa_lock, another page in the mapping could be processed for writeback inside an interrupt, and deadlock can occur. The fix is simple and clean if we use xa_for_each_range(), which handles the iteration with RCU while reducing code complexity. The problem is easily reproduced with the following test: mount -o vers=3,fsc 127.0.0.1:/export /mnt/nfs dd if=/dev/zero of=/mnt/nfs/file1.bin bs=4096 count=1 echo 3 > /proc/sys/vm/drop_caches dd if=/mnt/nfs/file1.bin of=/dev/null umount /mnt/nfs On the console with a lockdep-enabled kernel a message similar to the following will be seen: ================================ WARNING: inconsistent lock state 6.7.0-lockdbg+ #10 Not tainted -------------------------------- inconsistent {IN-SOFTIRQ-W} -> {SOFTIRQ-ON-W} usage. test5/1708 [HC0[0]:SC0[0]:HE1:SE1] takes: ffff888127baa598 (&xa->xa_lock#4){+.?.}-{3:3}, at: nfs_netfs_issue_read+0x1b2/0x4b0 [nfs] {IN-SOFTIRQ-W} state was registered at: lock_acquire+0x144/0x380 _raw_spin_lock_irqsave+0x4e/0xa0 __folio_end_writeback+0x17e/0x5c0 folio_end_writeback+0x93/0x1b0 iomap_finish_ioend+0xeb/0x6a0 blk_update_request+0x204/0x7f0 blk_mq_end_request+0x30/0x1c0 blk_complete_reqs+0x7e/0xa0 __do_softirq+0x113/0x544 __irq_exit_rcu+0xfe/0x120 irq_exit_rcu+0xe/0x20 sysvec_call_function_single+0x6f/0x90 asm_sysvec_call_function_single+0x1a/0x20 pv_native_safe_halt+0xf/0x20 default_idle+0x9/0x20 default_idle_call+0x67/0xa0 do_idle+0x2b5/0x300 cpu_startup_entry+0x34/0x40 start_secondary+0x19d/0x1c0 secondary_startup_64_no_verify+0x18f/0x19b irq event stamp: 176891 hardirqs last enabled at (176891): [<ffffffffa67a0be4>] _raw_spin_unlock_irqrestore+0x44/0x60 hardirqs last disabled at (176890): [<ffffffffa67a0899>] _raw_spin_lock_irqsave+0x79/0xa0 softirqs last enabled at (176646): [<ffffffffa515d91e>] __irq_exit_rcu+0xfe/0x120 softirqs last disabled at (176633): [<ffffffffa515d91e>] __irq_exit_rcu+0xfe/0x120 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&xa->xa_lock#4); <Interrupt> lock(&xa->xa_lock#4); *** DEADLOCK *** 2 locks held by test5/1708: #0: ffff888127baa498 (&sb->s_type->i_mutex_key#22){++++}-{4:4}, at: nfs_start_io_read+0x28/0x90 [nfs] #1: ffff888127baa650 (mapping.invalidate_lock#3){.+.+}-{4:4}, at: page_cache_ra_unbounded+0xa4/0x280 stack backtrace: CPU: 6 PID: 1708 Comm: test5 Kdump: loaded Not tainted 6.7.0-lockdbg+ Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-1.fc39 04/01/2014 Call Trace: dump_stack_lvl+0x5b/0x90 mark_lock+0xb3f/0xd20 __lock_acquire+0x77b/0x3360 _raw_spin_lock+0x34/0x80 nfs_netfs_issue_read+0x1b2/0x4b0 [nfs] netfs_begin_read+0x77f/0x980 [netfs] nfs_netfs_readahead+0x45/0x60 [nfs] nfs_readahead+0x323/0x5a0 [nfs] read_pages+0xf3/0x5c0 page_cache_ra_unbounded+0x1c8/0x280 filemap_get_pages+0x38c/0xae0 filemap_read+0x206/0x5e0 nfs_file_read+0xb7/0x140 [nfs] vfs_read+0x2a9/0x460 ksys_read+0xb7/0x140 Fixes: 000dbe0 ("NFS: Convert buffered read paths to use netfs when fscache is enabled") Suggested-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Dave Wysochanski <dwysocha@redhat.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> Reviewed-by: David Howells <dhowells@redhat.com> Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>

…ables.c syzkaller started to report a warning below [0] after consuming the commit 4654467 ("netfilter: arptables: allow xtables-nft only builds"). The change accidentally removed the dependency on NETFILTER_FAMILY_ARP from IP_NF_ARPTABLES. If NF_TABLES_ARP is not enabled on Kconfig, NETFILTER_FAMILY_ARP will be removed and some code necessary for arptables will not be compiled. $ grep -E "(NETFILTER_FAMILY_ARP|IP_NF_ARPTABLES|NF_TABLES_ARP)" .config CONFIG_NETFILTER_FAMILY_ARP=y # CONFIG_NF_TABLES_ARP is not set CONFIG_IP_NF_ARPTABLES=y $ make olddefconfig $ grep -E "(NETFILTER_FAMILY_ARP|IP_NF_ARPTABLES|NF_TABLES_ARP)" .config # CONFIG_NF_TABLES_ARP is not set CONFIG_IP_NF_ARPTABLES=y So, when nf_register_net_hooks() is called for arptables, it will trigger the splat below. Now IP_NF_ARPTABLES is only enabled by IP_NF_ARPFILTER, so let's restore the dependency on NETFILTER_FAMILY_ARP in IP_NF_ARPFILTER. [0]: WARNING: CPU: 0 PID: 242 at net/netfilter/core.c:316 nf_hook_entry_head+0x1e1/0x2c0 net/netfilter/core.c:316 Modules linked in: CPU: 0 PID: 242 Comm: syz-executor.0 Not tainted 6.8.0-12821-g537c2e91d354 #10 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014 RIP: 0010:nf_hook_entry_head+0x1e1/0x2c0 net/netfilter/core.c:316 Code: 83 fd 04 0f 87 bc 00 00 00 e8 5b 84 83 fd 4d 8d ac ec a8 0b 00 00 e8 4e 84 83 fd 4c 89 e8 5b 5d 41 5c 41 5d c3 e8 3f 84 83 fd <0f> 0b e8 38 84 83 fd 45 31 ed 5b 5d 4c 89 e8 41 5c 41 5d c3 e8 26 RSP: 0018:ffffc90000b8f6e8 EFLAGS: 00010293 RAX: 0000000000000000 RBX: 0000000000000003 RCX: ffffffff83c42164 RDX: ffff888106851180 RSI: ffffffff83c42321 RDI: 0000000000000005 RBP: 0000000000000000 R08: 0000000000000005 R09: 000000000000000a R10: 0000000000000003 R11: ffff8881055c2f00 R12: ffff888112b78000 R13: 0000000000000000 R14: ffff8881055c2f00 R15: ffff8881055c2f00 FS: 00007f377bd78800(0000) GS:ffff88811b000000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000496068 CR3: 000000011298b003 CR4: 0000000000770ef0 PKRU: 55555554 Call Trace: <TASK> __nf_register_net_hook+0xcd/0x7a0 net/netfilter/core.c:428 nf_register_net_hook+0x116/0x170 net/netfilter/core.c:578 nf_register_net_hooks+0x5d/0xc0 net/netfilter/core.c:594 arpt_register_table+0x250/0x420 net/ipv4/netfilter/arp_tables.c:1553 arptable_filter_table_init+0x41/0x60 net/ipv4/netfilter/arptable_filter.c:39 xt_find_table_lock+0x2e9/0x4b0 net/netfilter/x_tables.c:1260 xt_request_find_table_lock+0x2b/0xe0 net/netfilter/x_tables.c:1285 get_info+0x169/0x5c0 net/ipv4/netfilter/arp_tables.c:808 do_arpt_get_ctl+0x3f9/0x830 net/ipv4/netfilter/arp_tables.c:1444 nf_getsockopt+0x76/0xd0 net/netfilter/nf_sockopt.c:116 ip_getsockopt+0x17d/0x1c0 net/ipv4/ip_sockglue.c:1777 tcp_getsockopt+0x99/0x100 net/ipv4/tcp.c:4373 do_sock_getsockopt+0x279/0x360 net/socket.c:2373 __sys_getsockopt+0x115/0x1e0 net/socket.c:2402 __do_sys_getsockopt net/socket.c:2412 [inline] __se_sys_getsockopt net/socket.c:2409 [inline] __x64_sys_getsockopt+0xbd/0x150 net/socket.c:2409 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0x4f/0x110 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x46/0x4e RIP: 0033:0x7f377beca6fe Code: 1f 44 00 00 48 8b 15 01 97 0a 00 f7 d8 64 89 02 b8 ff ff ff ff eb b8 0f 1f 44 00 00 f3 0f 1e fa 49 89 ca b8 37 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 0a c3 66 0f 1f 84 00 00 00 00 00 48 8b 15 c9 RSP: 002b:00000000005df728 EFLAGS: 00000246 ORIG_RAX: 0000000000000037 RAX: ffffffffffffffda RBX: 00000000004966e0 RCX: 00007f377beca6fe RDX: 0000000000000060 RSI: 0000000000000000 RDI: 0000000000000003 RBP: 000000000042938a R08: 00000000005df73c R09: 00000000005df800 R10: 00000000004966e8 R11: 0000000000000246 R12: 0000000000000003 R13: 0000000000496068 R14: 0000000000000003 R15: 00000000004bc9d8 </TASK> Fixes: 4654467 ("netfilter: arptables: allow xtables-nft only builds") Reported-by: syzkaller <syzkaller@googlegroups.com> Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

vhost_worker will call tun call backs to receive packets. If too many illegal packets arrives, tun_do_read will keep dumping packet contents. When console is enabled, it will costs much more cpu time to dump packet and soft lockup will be detected. net_ratelimit mechanism can be used to limit the dumping rate. PID: 33036 TASK: ffff949da6f20000 CPU: 23 COMMAND: "vhost-32980" #0 [fffffe00003fce50] crash_nmi_callback at ffffffff89249253 #1 [fffffe00003fce58] nmi_handle at ffffffff89225fa3 #2 [fffffe00003fceb0] default_do_nmi at ffffffff8922642e #3 [fffffe00003fced0] do_nmi at ffffffff8922660d #4 [fffffe00003fcef0] end_repeat_nmi at ffffffff89c01663 [exception RIP: io_serial_in+20] RIP: ffffffff89792594 RSP: ffffa655314979e8 RFLAGS: 00000002 RAX: ffffffff89792500 RBX: ffffffff8af428a0 RCX: 0000000000000000 RDX: 00000000000003fd RSI: 0000000000000005 RDI: ffffffff8af428a0 RBP: 0000000000002710 R8: 0000000000000004 R9: 000000000000000f R10: 0000000000000000 R11: ffffffff8acbf64f R12: 0000000000000020 R13: ffffffff8acbf698 R14: 0000000000000058 R15: 0000000000000000 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 #5 [ffffa655314979e8] io_serial_in at ffffffff89792594 #6 [ffffa655314979e8] wait_for_xmitr at ffffffff89793470 #7 [ffffa65531497a08] serial8250_console_putchar at ffffffff897934f6 #8 [ffffa65531497a20] uart_console_write at ffffffff8978b605 #9 [ffffa65531497a48] serial8250_console_write at ffffffff89796558 #10 [ffffa65531497ac8] console_unlock at ffffffff89316124 #11 [ffffa65531497b10] vprintk_emit at ffffffff89317c07 #12 [ffffa65531497b68] printk at ffffffff89318306 #13 [ffffa65531497bc8] print_hex_dump at ffffffff89650765 #14 [ffffa65531497ca8] tun_do_read at ffffffffc0b06c27 [tun] #15 [ffffa65531497d38] tun_recvmsg at ffffffffc0b06e34 [tun] #16 [ffffa65531497d68] handle_rx at ffffffffc0c5d682 [vhost_net] #17 [ffffa65531497ed0] vhost_worker at ffffffffc0c644dc [vhost] #18 [ffffa65531497f10] kthread at ffffffff892d2e72 #19 [ffffa65531497f50] ret_from_fork at ffffffff89c0022f Fixes: ef3db4a ("tun: avoid BUG, dump packet on GSO errors") Signed-off-by: Lei Chen <lei.chen@smartx.com> Reviewed-by: Willem de Bruijn <willemb@google.com> Acked-by: Jason Wang <jasowang@redhat.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Link: https://lore.kernel.org/r/20240415020247.2207781-1-lei.chen@smartx.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>

ui_browser__show() is capturing the input title that is stack allocated memory in hist_browser__run(). Avoid a use after return by strdup-ing the string. Committer notes: Further explanation from Ian Rogers: My command line using tui is: $ sudo bash -c 'rm /tmp/asan.log*; export ASAN_OPTIONS="log_path=/tmp/asan.log"; /tmp/perf/perf mem record -a sleep 1; /tmp/perf/perf mem report' I then go to the perf annotate view and quit. This triggers the asan error (from the log file): ``` ==1254591==ERROR: AddressSanitizer: stack-use-after-return on address 0x7f2813331920 at pc 0x7f28180 65991 bp 0x7fff0a21c750 sp 0x7fff0a21bf10 READ of size 80 at 0x7f2813331920 thread T0 #0 0x7f2818065990 in __interceptor_strlen ../../../../src/libsanitizer/sanitizer_common/sanitizer_common_interceptors.inc:461 #1 0x7f2817698251 in SLsmg_write_wrapped_string (/lib/x86_64-linux-gnu/libslang.so.2+0x98251) #2 0x7f28176984b9 in SLsmg_write_nstring (/lib/x86_64-linux-gnu/libslang.so.2+0x984b9) #3 0x55c94045b365 in ui_browser__write_nstring ui/browser.c:60 #4 0x55c94045c558 in __ui_browser__show_title ui/browser.c:266 #5 0x55c94045c776 in ui_browser__show ui/browser.c:288 #6 0x55c94045c06d in ui_browser__handle_resize ui/browser.c:206 #7 0x55c94047979b in do_annotate ui/browsers/hists.c:2458 #8 0x55c94047fb17 in evsel__hists_browse ui/browsers/hists.c:3412 #9 0x55c940480a0c in perf_evsel_menu__run ui/browsers/hists.c:3527 #10 0x55c940481108 in __evlist__tui_browse_hists ui/browsers/hists.c:3613 #11 0x55c9404813f7 in evlist__tui_browse_hists ui/browsers/hists.c:3661 #12 0x55c93ffa253f in report__browse_hists tools/perf/builtin-report.c:671 #13 0x55c93ffa58ca in __cmd_report tools/perf/builtin-report.c:1141 #14 0x55c93ffaf159 in cmd_report tools/perf/builtin-report.c:1805 #15 0x55c94000c05c in report_events tools/perf/builtin-mem.c:374 #16 0x55c94000d96d in cmd_mem tools/perf/builtin-mem.c:516 #17 0x55c9400e44ee in run_builtin tools/perf/perf.c:350 #18 0x55c9400e4a5a in handle_internal_command tools/perf/perf.c:403 #19 0x55c9400e4e22 in run_argv tools/perf/perf.c:447 #20 0x55c9400e53ad in main tools/perf/perf.c:561 #21 0x7f28170456c9 in __libc_start_call_main ../sysdeps/nptl/libc_start_call_main.h:58 #22 0x7f2817045784 in __libc_start_main_impl ../csu/libc-start.c:360 #23 0x55c93ff544c0 in _start (/tmp/perf/perf+0x19a4c0) (BuildId: 84899b0e8c7d3a3eaa67b2eb35e3d8b2f8cd4c93) Address 0x7f2813331920 is located in stack of thread T0 at offset 32 in frame #0 0x55c94046e85e in hist_browser__run ui/browsers/hists.c:746 This frame has 1 object(s): [32, 192) 'title' (line 747) <== Memory access at offset 32 is inside this variable HINT: this may be a false positive if your program uses some custom stack unwind mechanism, swapcontext or vfork ``` hist_browser__run isn't on the stack so the asan error looks legit. There's no clean init/exit on struct ui_browser so I may be trading a use-after-return for a memory leak, but that seems look a good trade anyway. Fixes: 05e8b08 ("perf ui browser: Stop using 'self'") Signed-off-by: Ian Rogers <irogers@google.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com> Cc: Ben Gainey <ben.gainey@arm.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: James Clark <james.clark@arm.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kajol Jain <kjain@linux.ibm.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: K Prateek Nayak <kprateek.nayak@amd.com> Cc: Li Dong <lidong@vivo.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Oliver Upton <oliver.upton@linux.dev> Cc: Paran Lee <p4ranlee@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ravi Bangoria <ravi.bangoria@amd.com> Cc: Sun Haiyong <sunhaiyong@loongson.cn> Cc: Tim Chen <tim.c.chen@linux.intel.com> Cc: Yanteng Si <siyanteng@loongson.cn> Cc: Yicong Yang <yangyicong@hisilicon.com> Link: https://lore.kernel.org/r/20240507183545.1236093-2-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

…PLES event" This reverts commit 7d1405c. This causes segfaults in some cases, as reported by Milian: ``` sudo /usr/bin/perf record -z --call-graph dwarf -e cycles -e raw_syscalls:sys_enter ls ... [ perf record: Woken up 3 times to write data ] malloc(): invalid next size (unsorted) Aborted ``` Backtrace with GDB + debuginfod: ``` malloc(): invalid next size (unsorted) Thread 1 "perf" received signal SIGABRT, Aborted. __pthread_kill_implementation (threadid=<optimized out>, signo=signo@entry=6, no_tid=no_tid@entry=0) at pthread_kill.c:44 Downloading source file /usr/src/debug/glibc/glibc/nptl/pthread_kill.c 44 return INTERNAL_SYSCALL_ERROR_P (ret) ? INTERNAL_SYSCALL_ERRNO (ret) : 0; (gdb) bt #0 __pthread_kill_implementation (threadid=<optimized out>, signo=signo@entry=6, no_tid=no_tid@entry=0) at pthread_kill.c:44 #1 0x00007ffff6ea8eb3 in __pthread_kill_internal (threadid=<optimized out>, signo=6) at pthread_kill.c:78 #2 0x00007ffff6e50a30 in __GI_raise (sig=sig@entry=6) at ../sysdeps/posix/ raise.c:26 #3 0x00007ffff6e384c3 in __GI_abort () at abort.c:79 #4 0x00007ffff6e39354 in __libc_message_impl (fmt=fmt@entry=0x7ffff6fc22ea "%s\n") at ../sysdeps/posix/libc_fatal.c:132 #5 0x00007ffff6eb3085 in malloc_printerr (str=str@entry=0x7ffff6fc5850 "malloc(): invalid next size (unsorted)") at malloc.c:5772 #6 0x00007ffff6eb657c in _int_malloc (av=av@entry=0x7ffff6ff6ac0 <main_arena>, bytes=bytes@entry=368) at malloc.c:4081 #7 0x00007ffff6eb877e in __libc_calloc (n=<optimized out>, elem_size=<optimized out>) at malloc.c:3754 #8 0x000055555569bdb6 in perf_session.do_write_header () #9 0x00005555555a373a in __cmd_record.constprop.0 () #10 0x00005555555a6846 in cmd_record () #11 0x000055555564db7f in run_builtin () #12 0x000055555558ed77 in main () ``` Valgrind memcheck: ``` ==45136== Invalid write of size 8 ==45136== at 0x2B38A5: perf_event__synthesize_id_sample (in /usr/bin/perf) ==45136== by 0x157069: __cmd_record.constprop.0 (in /usr/bin/perf) ==45136== by 0x15A845: cmd_record (in /usr/bin/perf) ==45136== by 0x201B7E: run_builtin (in /usr/bin/perf) ==45136== by 0x142D76: main (in /usr/bin/perf) ==45136== Address 0x6a866a8 is 0 bytes after a block of size 40 alloc'd ==45136== at 0x4849BF3: calloc (vg_replace_malloc.c:1675) ==45136== by 0x3574AB: zalloc (in /usr/bin/perf) ==45136== by 0x1570E0: __cmd_record.constprop.0 (in /usr/bin/perf) ==45136== by 0x15A845: cmd_record (in /usr/bin/perf) ==45136== by 0x201B7E: run_builtin (in /usr/bin/perf) ==45136== by 0x142D76: main (in /usr/bin/perf) ==45136== ==45136== Syscall param write(buf) points to unaddressable byte(s) ==45136== at 0x575953D: __libc_write (write.c:26) ==45136== by 0x575953D: write (write.c:24) ==45136== by 0x35761F: ion (in /usr/bin/perf) ==45136== by 0x357778: writen (in /usr/bin/perf) ==45136== by 0x1548F7: record__write (in /usr/bin/perf) ==45136== by 0x15708A: __cmd_record.constprop.0 (in /usr/bin/perf) ==45136== by 0x15A845: cmd_record (in /usr/bin/perf) ==45136== by 0x201B7E: run_builtin (in /usr/bin/perf) ==45136== by 0x142D76: main (in /usr/bin/perf) ==45136== Address 0x6a866a8 is 0 bytes after a block of size 40 alloc'd ==45136== at 0x4849BF3: calloc (vg_replace_malloc.c:1675) ==45136== by 0x3574AB: zalloc (in /usr/bin/perf) ==45136== by 0x1570E0: __cmd_record.constprop.0 (in /usr/bin/perf) ==45136== by 0x15A845: cmd_record (in /usr/bin/perf) ==45136== by 0x201B7E: run_builtin (in /usr/bin/perf) ==45136== by 0x142D76: main (in /usr/bin/perf) ==45136== ----- Closes: https://lore.kernel.org/linux-perf-users/23879991.0LEYPuXRzz@milian-workstation/ Reported-by: Milian Wolff <milian.wolff@kdab.com> Tested-by: Milian Wolff <milian.wolff@kdab.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: stable@kernel.org # 6.8+ Link: https://lore.kernel.org/lkml/Zl9ksOlHJHnKM70p@x1 Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

We have been seeing crashes on duplicate keys in btrfs_set_item_key_safe(): BTRFS critical (device vdb): slot 4 key (450 108 8192) new key (450 108 8192) ------------[ cut here ]------------ kernel BUG at fs/btrfs/ctree.c:2620! invalid opcode: 0000 [#1] PREEMPT SMP PTI CPU: 0 PID: 3139 Comm: xfs_io Kdump: loaded Not tainted 6.9.0 #6 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-2.fc40 04/01/2014 RIP: 0010:btrfs_set_item_key_safe+0x11f/0x290 [btrfs] With the following stack trace: #0 btrfs_set_item_key_safe (fs/btrfs/ctree.c:2620:4) #1 btrfs_drop_extents (fs/btrfs/file.c:411:4) #2 log_one_extent (fs/btrfs/tree-log.c:4732:9) #3 btrfs_log_changed_extents (fs/btrfs/tree-log.c:4955:9) #4 btrfs_log_inode (fs/btrfs/tree-log.c:6626:9) #5 btrfs_log_inode_parent (fs/btrfs/tree-log.c:7070:8) #6 btrfs_log_dentry_safe (fs/btrfs/tree-log.c:7171:8) #7 btrfs_sync_file (fs/btrfs/file.c:1933:8) #8 vfs_fsync_range (fs/sync.c:188:9) #9 vfs_fsync (fs/sync.c:202:9) #10 do_fsync (fs/sync.c:212:9) #11 __do_sys_fdatasync (fs/sync.c:225:9) #12 __se_sys_fdatasync (fs/sync.c:223:1) #13 __x64_sys_fdatasync (fs/sync.c:223:1) #14 do_syscall_x64 (arch/x86/entry/common.c:52:14) #15 do_syscall_64 (arch/x86/entry/common.c:83:7) #16 entry_SYSCALL_64+0xaf/0x14c (arch/x86/entry/entry_64.S:121) So we're logging a changed extent from fsync, which is splitting an extent in the log tree. But this split part already exists in the tree, triggering the BUG(). This is the state of the log tree at the time of the crash, dumped with drgn (https://github.com/osandov/drgn/blob/main/contrib/btrfs_tree.py) to get more details than btrfs_print_leaf() gives us: >>> print_extent_buffer(prog.crashed_thread().stack_trace()[0]["eb"]) leaf 33439744 level 0 items 72 generation 9 owner 18446744073709551610 leaf 33439744 flags 0x100000000000000 fs uuid e5bd3946-400c-4223-8923-190ef1f18677 chunk uuid d58cb17e-6d02-494a-829a-18b7d8a399da item 0 key (450 INODE_ITEM 0) itemoff 16123 itemsize 160 generation 7 transid 9 size 8192 nbytes 8473563889606862198 block group 0 mode 100600 links 1 uid 0 gid 0 rdev 0 sequence 204 flags 0x10(PREALLOC) atime 1716417703.220000000 (2024-05-22 15:41:43) ctime 1716417704.983333333 (2024-05-22 15:41:44) mtime 1716417704.983333333 (2024-05-22 15:41:44) otime 17592186044416.000000000 (559444-03-08 01:40:16) item 1 key (450 INODE_REF 256) itemoff 16110 itemsize 13 index 195 namelen 3 name: 193 item 2 key (450 XATTR_ITEM 1640047104) itemoff 16073 itemsize 37 location key (0 UNKNOWN.0 0) type XATTR transid 7 data_len 1 name_len 6 name: user.a data a item 3 key (450 EXTENT_DATA 0) itemoff 16020 itemsize 53 generation 9 type 1 (regular) extent data disk byte 303144960 nr 12288 extent data offset 0 nr 4096 ram 12288 extent compression 0 (none) item 4 key (450 EXTENT_DATA 4096) itemoff 15967 itemsize 53 generation 9 type 2 (prealloc) prealloc data disk byte 303144960 nr 12288 prealloc data offset 4096 nr 8192 item 5 key (450 EXTENT_DATA 8192) itemoff 15914 itemsize 53 generation 9 type 2 (prealloc) prealloc data disk byte 303144960 nr 12288 prealloc data offset 8192 nr 4096 ... So the real problem happened earlier: notice that items 4 (4k-12k) and 5 (8k-12k) overlap. Both are prealloc extents. Item 4 straddles i_size and item 5 starts at i_size. Here is the state of the filesystem tree at the time of the crash: >>> root = prog.crashed_thread().stack_trace()[2]["inode"].root >>> ret, nodes, slots = btrfs_search_slot(root, BtrfsKey(450, 0, 0)) >>> print_extent_buffer(nodes[0]) leaf 30425088 level 0 items 184 generation 9 owner 5 leaf 30425088 flags 0x100000000000000 fs uuid e5bd3946-400c-4223-8923-190ef1f18677 chunk uuid d58cb17e-6d02-494a-829a-18b7d8a399da ... item 179 key (450 INODE_ITEM 0) itemoff 4907 itemsize 160 generation 7 transid 7 size 4096 nbytes 12288 block group 0 mode 100600 links 1 uid 0 gid 0 rdev 0 sequence 6 flags 0x10(PREALLOC) atime 1716417703.220000000 (2024-05-22 15:41:43) ctime 1716417703.220000000 (2024-05-22 15:41:43) mtime 1716417703.220000000 (2024-05-22 15:41:43) otime 1716417703.220000000 (2024-05-22 15:41:43) item 180 key (450 INODE_REF 256) itemoff 4894 itemsize 13 index 195 namelen 3 name: 193 item 181 key (450 XATTR_ITEM 1640047104) itemoff 4857 itemsize 37 location key (0 UNKNOWN.0 0) type XATTR transid 7 data_len 1 name_len 6 name: user.a data a item 182 key (450 EXTENT_DATA 0) itemoff 4804 itemsize 53 generation 9 type 1 (regular) extent data disk byte 303144960 nr 12288 extent data offset 0 nr 8192 ram 12288 extent compression 0 (none) item 183 key (450 EXTENT_DATA 8192) itemoff 4751 itemsize 53 generation 9 type 2 (prealloc) prealloc data disk byte 303144960 nr 12288 prealloc data offset 8192 nr 4096 Item 5 in the log tree corresponds to item 183 in the filesystem tree, but nothing matches item 4. Furthermore, item 183 is the last item in the leaf. btrfs_log_prealloc_extents() is responsible for logging prealloc extents beyond i_size. It first truncates any previously logged prealloc extents that start beyond i_size. Then, it walks the filesystem tree and copies the prealloc extent items to the log tree. If it hits the end of a leaf, then it calls btrfs_next_leaf(), which unlocks the tree and does another search. However, while the filesystem tree is unlocked, an ordered extent completion may modify the tree. In particular, it may insert an extent item that overlaps with an extent item that was already copied to the log tree. This may manifest in several ways depending on the exact scenario, including an EEXIST error that is silently translated to a full sync, overlapping items in the log tree, or this crash. This particular crash is triggered by the following sequence of events: - Initially, the file has i_size=4k, a regular extent from 0-4k, and a prealloc extent beyond i_size from 4k-12k. The prealloc extent item is the last item in its B-tree leaf. - The file is fsync'd, which copies its inode item and both extent items to the log tree. - An xattr is set on the file, which sets the BTRFS_INODE_COPY_EVERYTHING flag. - The range 4k-8k in the file is written using direct I/O. i_size is extended to 8k, but the ordered extent is still in flight. - The file is fsync'd. Since BTRFS_INODE_COPY_EVERYTHING is set, this calls copy_inode_items_to_log(), which calls btrfs_log_prealloc_extents(). - btrfs_log_prealloc_extents() finds the 4k-12k prealloc extent in the filesystem tree. Since it starts before i_size, it skips it. Since it is the last item in its B-tree leaf, it calls btrfs_next_leaf(). - btrfs_next_leaf() unlocks the path. - The ordered extent completion runs, which converts the 4k-8k part of the prealloc extent to written and inserts the remaining prealloc part from 8k-12k. - btrfs_next_leaf() does a search and finds the new prealloc extent 8k-12k. - btrfs_log_prealloc_extents() copies the 8k-12k prealloc extent into the log tree. Note that it overlaps with the 4k-12k prealloc extent that was copied to the log tree by the first fsync. - fsync calls btrfs_log_changed_extents(), which tries to log the 4k-8k extent that was written. - This tries to drop the range 4k-8k in the log tree, which requires adjusting the start of the 4k-12k prealloc extent in the log tree to 8k. - btrfs_set_item_key_safe() sees that there is already an extent starting at 8k in the log tree and calls BUG(). Fix this by detecting when we're about to insert an overlapping file extent item in the log tree and truncating the part that would overlap. CC: stable@vger.kernel.org # 6.1+ Reviewed-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Omar Sandoval <osandov@fb.com> Signed-off-by: David Sterba <dsterba@suse.com>

The code in ocfs2_dio_end_io_write() estimates number of necessary transaction credits using ocfs2_calc_extend_credits(). This however does not take into account that the IO could be arbitrarily large and can contain arbitrary number of extents. Extent tree manipulations do often extend the current transaction but not in all of the cases. For example if we have only single block extents in the tree, ocfs2_mark_extent_written() will end up calling ocfs2_replace_extent_rec() all the time and we will never extend the current transaction and eventually exhaust all the transaction credits if the IO contains many single block extents. Once that happens a WARN_ON(jbd2_handle_buffer_credits(handle) <= 0) is triggered in jbd2_journal_dirty_metadata() and subsequently OCFS2 aborts in response to this error. This was actually triggered by one of our customers on a heavily fragmented OCFS2 filesystem. To fix the issue make sure the transaction always has enough credits for one extent insert before each call of ocfs2_mark_extent_written(). Heming Zhao said: ------ PANIC: "Kernel panic - not syncing: OCFS2: (device dm-1): panic forced after error" PID: xxx TASK: xxxx CPU: 5 COMMAND: "SubmitThread-CA" #0 machine_kexec at ffffffff8c069932 #1 __crash_kexec at ffffffff8c1338fa #2 panic at ffffffff8c1d69b9 #3 ocfs2_handle_error at ffffffffc0c86c0c [ocfs2] #4 __ocfs2_abort at ffffffffc0c88387 [ocfs2] #5 ocfs2_journal_dirty at ffffffffc0c51e98 [ocfs2] #6 ocfs2_split_extent at ffffffffc0c27ea3 [ocfs2] #7 ocfs2_change_extent_flag at ffffffffc0c28053 [ocfs2] #8 ocfs2_mark_extent_written at ffffffffc0c28347 [ocfs2] #9 ocfs2_dio_end_io_write at ffffffffc0c2bef9 [ocfs2] #10 ocfs2_dio_end_io at ffffffffc0c2c0f5 [ocfs2] #11 dio_complete at ffffffff8c2b9fa7 #12 do_blockdev_direct_IO at ffffffff8c2bc09f #13 ocfs2_direct_IO at ffffffffc0c2b653 [ocfs2] #14 generic_file_direct_write at ffffffff8c1dcf14 #15 __generic_file_write_iter at ffffffff8c1dd07b #16 ocfs2_file_write_iter at ffffffffc0c49f1f [ocfs2] #17 aio_write at ffffffff8c2cc72e #18 kmem_cache_alloc at ffffffff8c248dde #19 do_io_submit at ffffffff8c2ccada #20 do_syscall_64 at ffffffff8c004984 #21 entry_SYSCALL_64_after_hwframe at ffffffff8c8000ba Link: https://lkml.kernel.org/r/20240617095543.6971-1-jack@suse.cz Link: https://lkml.kernel.org/r/20240614145243.8837-1-jack@suse.cz Fixes: c15471f ("ocfs2: fix sparse file & data ordering issue in direct io") Signed-off-by: Jan Kara <jack@suse.cz> Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com> Reviewed-by: Heming Zhao <heming.zhao@suse.com> Cc: Mark Fasheh <mark@fasheh.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Changwei Ge <gechangwei@live.cn> Cc: Gang He <ghe@suse.com> Cc: Jun Piao <piaojun@huawei.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Bos can be put with multiple unrelated dma-resv locks held. But imported bos attempt to grab the bo dma-resv during dma-buf detach that typically happens during cleanup. That leads to lockde splats similar to the below and a potential ABBA deadlock. Fix this by always taking the delayed workqueue cleanup path for imported bos. Requesting stable fixes from when the Xe driver was introduced, since its usage of drm_exec and wide vm dma_resvs appear to be the first reliable trigger of this. [22982.116427] ============================================ [22982.116428] WARNING: possible recursive locking detected [22982.116429] 6.10.0-rc2+ #10 Tainted: G U W [22982.116430] -------------------------------------------- [22982.116430] glxgears:sh0/5785 is trying to acquire lock: [22982.116431] ffff8c2bafa539a8 (reservation_ww_class_mutex){+.+.}-{3:3}, at: dma_buf_detach+0x3b/0xf0 [22982.116438] but task is already holding lock: [22982.116438] ffff8c2d9aba6da8 (reservation_ww_class_mutex){+.+.}-{3:3}, at: drm_exec_lock_obj+0x49/0x2b0 [drm_exec] [22982.116442] other info that might help us debug this: [22982.116442] Possible unsafe locking scenario: [22982.116443] CPU0 [22982.116444] ---- [22982.116444] lock(reservation_ww_class_mutex); [22982.116445] lock(reservation_ww_class_mutex); [22982.116447] *** DEADLOCK *** [22982.116447] May be due to missing lock nesting notation [22982.116448] 5 locks held by glxgears:sh0/5785: [22982.116449] #0: ffff8c2d9aba58c8 (&xef->vm.lock){+.+.}-{3:3}, at: xe_file_close+0xde/0x1c0 [xe] [22982.116507] #1: ffff8c2e28cc8480 (&vm->lock){++++}-{3:3}, at: xe_vm_close_and_put+0x161/0x9b0 [xe] [22982.116578] #2: ffff8c2e31982970 (&val->lock){.+.+}-{3:3}, at: xe_validation_ctx_init+0x6d/0x70 [xe] [22982.116647] #3: ffffacdc469478a8 (reservation_ww_class_acquire){+.+.}-{0:0}, at: xe_vma_destroy_unlocked+0x7f/0xe0 [xe] [22982.116716] #4: ffff8c2d9aba6da8 (reservation_ww_class_mutex){+.+.}-{3:3}, at: drm_exec_lock_obj+0x49/0x2b0 [drm_exec] [22982.116719] stack backtrace: [22982.116720] CPU: 8 PID: 5785 Comm: glxgears:sh0 Tainted: G U W 6.10.0-rc2+ #10 [22982.116721] Hardware name: ASUS System Product Name/PRIME B560M-A AC, BIOS 2001 02/01/2023 [22982.116723] Call Trace: [22982.116724] <TASK> [22982.116725] dump_stack_lvl+0x77/0xb0 [22982.116727] __lock_acquire+0x1232/0x2160 [22982.116730] lock_acquire+0xcb/0x2d0 [22982.116732] ? dma_buf_detach+0x3b/0xf0 [22982.116734] ? __lock_acquire+0x417/0x2160 [22982.116736] __ww_mutex_lock.constprop.0+0xd0/0x13b0 [22982.116738] ? dma_buf_detach+0x3b/0xf0 [22982.116741] ? dma_buf_detach+0x3b/0xf0 [22982.116743] ? ww_mutex_lock+0x2b/0x90 [22982.116745] ww_mutex_lock+0x2b/0x90 [22982.116747] dma_buf_detach+0x3b/0xf0 [22982.116749] drm_prime_gem_destroy+0x2f/0x40 [drm] [22982.116775] xe_ttm_bo_destroy+0x32/0x220 [xe] [22982.116818] ? __mutex_unlock_slowpath+0x3a/0x290 [22982.116821] drm_exec_unlock_all+0xa1/0xd0 [drm_exec] [22982.116823] drm_exec_fini+0x12/0xb0 [drm_exec] [22982.116824] xe_validation_ctx_fini+0x15/0x40 [xe] [22982.116892] xe_vma_destroy_unlocked+0xb1/0xe0 [xe] [22982.116959] xe_vm_close_and_put+0x41a/0x9b0 [xe] [22982.117025] ? xa_find+0xe3/0x1e0 [22982.117028] xe_file_close+0x10a/0x1c0 [xe] [22982.117074] drm_file_free+0x22a/0x280 [drm] [22982.117099] drm_release_noglobal+0x22/0x70 [drm] [22982.117119] __fput+0xf1/0x2d0 [22982.117122] task_work_run+0x59/0x90 [22982.117125] do_exit+0x330/0xb40 [22982.117127] do_group_exit+0x36/0xa0 [22982.117129] get_signal+0xbd2/0xbe0 [22982.117131] arch_do_signal_or_restart+0x3e/0x240 [22982.117134] syscall_exit_to_user_mode+0x1e7/0x290 [22982.117137] do_syscall_64+0xa1/0x180 [22982.117139] ? lock_acquire+0xcb/0x2d0 [22982.117140] ? __set_task_comm+0x28/0x1e0 [22982.117141] ? find_held_lock+0x2b/0x80 [22982.117144] ? __set_task_comm+0xe1/0x1e0 [22982.117145] ? lock_release+0xca/0x290 [22982.117147] ? __do_sys_prctl+0x245/0xab0 [22982.117149] ? lockdep_hardirqs_on_prepare+0xde/0x190 [22982.117150] ? syscall_exit_to_user_mode+0xb0/0x290 [22982.117152] ? do_syscall_64+0xa1/0x180 [22982.117154] ? __lock_acquire+0x417/0x2160 [22982.117155] ? reacquire_held_locks+0xd1/0x1f0 [22982.117156] ? do_user_addr_fault+0x30c/0x790 [22982.117158] ? lock_acquire+0xcb/0x2d0 [22982.117160] ? find_held_lock+0x2b/0x80 [22982.117162] ? do_user_addr_fault+0x357/0x790 [22982.117163] ? lock_release+0xca/0x290 [22982.117164] ? do_user_addr_fault+0x361/0x790 [22982.117166] ? trace_hardirqs_off+0x4b/0xc0 [22982.117168] ? clear_bhb_loop+0x45/0xa0 [22982.117170] ? clear_bhb_loop+0x45/0xa0 [22982.117172] ? clear_bhb_loop+0x45/0xa0 [22982.117174] entry_SYSCALL_64_after_hwframe+0x76/0x7e [22982.117176] RIP: 0033:0x7f943d267169 [22982.117192] Code: Unable to access opcode bytes at 0x7f943d26713f. [22982.117193] RSP: 002b:00007f9430bffc80 EFLAGS: 00000246 ORIG_RAX: 00000000000000ca [22982.117195] RAX: fffffffffffffe00 RBX: 0000000000000000 RCX: 00007f943d267169 [22982.117196] RDX: 0000000000000000 RSI: 0000000000000189 RDI: 00005622f89579d0 [22982.117197] RBP: 00007f9430bffcb0 R08: 0000000000000000 R09: 00000000ffffffff [22982.117198] R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 [22982.117199] R13: 0000000000000000 R14: 0000000000000000 R15: 00005622f89579d0 [22982.117202] </TASK> Fixes: dd08ebf ("drm/xe: Introduce a new DRM driver for Intel GPUs") Cc: Christian König <christian.koenig@amd.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: dri-devel@lists.freedesktop.org Cc: intel-xe@lists.freedesktop.org Cc: <stable@vger.kernel.org> # v6.8+ Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com> Reviewed-by: Matthew Brost <matthew.brost@intel.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Christian König <christian.koenig@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240628153848.4989-1-thomas.hellstrom@linux.intel.com

In commit 15d9da3 ("binder: use bitmap for faster descriptor lookup"), it was incorrectly assumed that references to the context manager node should always get descriptor zero assigned to them. However, if the context manager dies and a new process takes its place, then assigning descriptor zero to the new context manager might lead to collisions, as there could still be references to the older node. This issue was reported by syzbot with the following trace: kernel BUG at drivers/android/binder.c:1173! Internal error: Oops - BUG: 00000000f2000800 [#1] PREEMPT SMP Modules linked in: CPU: 1 PID: 447 Comm: binder-util Not tainted 6.10.0-rc6-00348-g31643d84b8c3 #10 Hardware name: linux,dummy-virt (DT) pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : binder_inc_ref_for_node+0x500/0x544 lr : binder_inc_ref_for_node+0x1e4/0x544 sp : ffff80008112b940 x29: ffff80008112b940 x28: ffff0e0e40310780 x27: 0000000000000000 x26: 0000000000000001 x25: ffff0e0e40310738 x24: ffff0e0e4089ba34 x23: ffff0e0e40310b00 x22: ffff80008112bb50 x21: ffffaf7b8f246970 x20: ffffaf7b8f773f08 x19: ffff0e0e4089b800 x18: 0000000000000000 x17: 0000000000000000 x16: 0000000000000000 x15: 000000002de4aa60 x14: 0000000000000000 x13: 2de4acf000000000 x12: 0000000000000020 x11: 0000000000000018 x10: 0000000000000020 x9 : ffffaf7b90601000 x8 : ffff0e0e48739140 x7 : 0000000000000000 x6 : 000000000000003f x5 : ffff0e0e40310b28 x4 : 0000000000000000 x3 : ffff0e0e40310720 x2 : ffff0e0e40310728 x1 : 0000000000000000 x0 : ffff0e0e40310710 Call trace: binder_inc_ref_for_node+0x500/0x544 binder_transaction+0xf68/0x2620 binder_thread_write+0x5bc/0x139c binder_ioctl+0xef4/0x10c8 [...] This patch adds back the previous behavior of assigning the next non-zero descriptor if references to previous context managers still exist. It amends both strategies, the newer dbitmap code and also the legacy slow_desc_lookup_olocked(), by allowing them to start looking for available descriptors at a given offset. Fixes: 15d9da3 ("binder: use bitmap for faster descriptor lookup") Cc: stable@vger.kernel.org Reported-and-tested-by: syzbot+3dae065ca76952a67257@syzkaller.appspotmail.com Closes: https://lore.kernel.org/all/000000000000c1c0a0061d1e6979@google.com/ Reviewed-by: Alice Ryhl <aliceryhl@google.com> Signed-off-by: Carlos Llamas <cmllamas@google.com> Link: https://lore.kernel.org/r/20240722150512.4192473-1-cmllamas@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

A sysfs reader can race with a device reset or removal, attempting to read device state when the device is not actually present. eg: [exception RIP: qed_get_current_link+17] #8 [ffffb9e4f2907c48] qede_get_link_ksettings at ffffffffc07a994a [qede] #9 [ffffb9e4f2907cd8] __rh_call_get_link_ksettings at ffffffff992b01a3 #10 [ffffb9e4f2907d38] __ethtool_get_link_ksettings at ffffffff992b04e4 #11 [ffffb9e4f2907d90] duplex_show at ffffffff99260300 #12 [ffffb9e4f2907e38] dev_attr_show at ffffffff9905a01c #13 [ffffb9e4f2907e50] sysfs_kf_seq_show at ffffffff98e0145b #14 [ffffb9e4f2907e68] seq_read at ffffffff98d902e3 #15 [ffffb9e4f2907ec8] vfs_read at ffffffff98d657d1 #16 [ffffb9e4f2907f00] ksys_read at ffffffff98d65c3f #17 [ffffb9e4f2907f38] do_syscall_64 at ffffffff98a052fb crash> struct net_device.state ffff9a9d21336000 state = 5, state 5 is __LINK_STATE_START (0b1) and __LINK_STATE_NOCARRIER (0b100). The device is not present, note lack of __LINK_STATE_PRESENT (0b10). This is the same sort of panic as observed in commit 4224cfd ("net-sysfs: add check for netdevice being present to speed_show"). There are many other callers of __ethtool_get_link_ksettings() which don't have a device presence check. Move this check into ethtool to protect all callers. Fixes: d519e17 ("net: export device speed and duplex via sysfs") Fixes: 4224cfd ("net-sysfs: add check for netdevice being present to speed_show") Signed-off-by: Jamie Bainbridge <jamie.bainbridge@gmail.com> Link: https://patch.msgid.link/8bae218864beaa44ed01628140475b9bf641c5b0.1724393671.git.jamie.bainbridge@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>

iter_finish_branch_entry() doesn't put the branch_info from/to map elements creating memory leaks. This can be seen with: ``` $ perf record -e cycles -b perf test -w noploop $ perf report -D ... Direct leak of 984344 byte(s) in 123043 object(s) allocated from: #0 0x7fb2654f3bd7 in malloc libsanitizer/asan/asan_malloc_linux.cpp:69 #1 0x564d3400d10b in map__get util/map.h:186 #2 0x564d3400d10b in ip__resolve_ams util/machine.c:1981 #3 0x564d34014d81 in sample__resolve_bstack util/machine.c:2151 #4 0x564d34094790 in iter_prepare_branch_entry util/hist.c:898 #5 0x564d34098fa4 in hist_entry_iter__add util/hist.c:1238 #6 0x564d33d1f0c7 in process_sample_event tools/perf/builtin-report.c:334 #7 0x564d34031eb7 in perf_session__deliver_event util/session.c:1655 #8 0x564d3403ba52 in do_flush util/ordered-events.c:245 #9 0x564d3403ba52 in __ordered_events__flush util/ordered-events.c:324 #10 0x564d3402d32e in perf_session__process_user_event util/session.c:1708 #11 0x564d34032480 in perf_session__process_event util/session.c:1877 #12 0x564d340336ad in reader__read_event util/session.c:2399 #13 0x564d34033fdc in reader__process_events util/session.c:2448 #14 0x564d34033fdc in __perf_session__process_events util/session.c:2495 #15 0x564d34033fdc in perf_session__process_events util/session.c:2661 #16 0x564d33d27113 in __cmd_report tools/perf/builtin-report.c:1065 #17 0x564d33d27113 in cmd_report tools/perf/builtin-report.c:1805 #18 0x564d33e0ccb7 in run_builtin tools/perf/perf.c:350 #19 0x564d33e0d45e in handle_internal_command tools/perf/perf.c:403 #20 0x564d33cdd827 in run_argv tools/perf/perf.c:447 #21 0x564d33cdd827 in main tools/perf/perf.c:561 ... ``` Clearing up the map_symbols properly creates maps reference count issues so resolve those. Resolving this issue doesn't improve peak heap consumption for the test above. Committer testing: $ sudo dnf install libasan $ make -k CORESIGHT=1 EXTRA_CFLAGS="-fsanitize=address" CC=clang O=/tmp/build/$(basename $PWD)/ -C tools/perf install-bin Reviewed-by: Kan Liang <kan.liang@linux.intel.com> Signed-off-by: Ian Rogers <irogers@google.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sun Haiyong <sunhaiyong@loongson.cn> Cc: Yanteng Si <siyanteng@loongson.cn> Link: https://lore.kernel.org/r/20240807065136.1039977-1-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

AddressSanitizer found a use-after-free bug in the symbol code which manifested as 'perf top' segfaulting. ==1238389==ERROR: AddressSanitizer: heap-use-after-free on address 0x60b00c48844b at pc 0x5650d8035961 bp 0x7f751aaecc90 sp 0x7f751aaecc80 READ of size 1 at 0x60b00c48844b thread T193 #0 0x5650d8035960 in _sort__sym_cmp util/sort.c:310 #1 0x5650d8043744 in hist_entry__cmp util/hist.c:1286 #2 0x5650d8043951 in hists__findnew_entry util/hist.c:614 #3 0x5650d804568f in __hists__add_entry util/hist.c:754 #4 0x5650d8045bf9 in hists__add_entry util/hist.c:772 #5 0x5650d8045df1 in iter_add_single_normal_entry util/hist.c:997 #6 0x5650d8043326 in hist_entry_iter__add util/hist.c:1242 #7 0x5650d7ceeefe in perf_event__process_sample /home/matt/src/linux/tools/perf/builtin-top.c:845 #8 0x5650d7ceeefe in deliver_event /home/matt/src/linux/tools/perf/builtin-top.c:1208 #9 0x5650d7fdb51b in do_flush util/ordered-events.c:245 #10 0x5650d7fdb51b in __ordered_events__flush util/ordered-events.c:324 #11 0x5650d7ced743 in process_thread /home/matt/src/linux/tools/perf/builtin-top.c:1120 #12 0x7f757ef1f133 in start_thread nptl/pthread_create.c:442 #13 0x7f757ef9f7db in clone3 ../sysdeps/unix/sysv/linux/x86_64/clone3.S:81 When updating hist maps it's also necessary to update the hist symbol reference because the old one gets freed in map__put(). While this bug was probably introduced with 5c24b67 ("perf tools: Replace map->referenced & maps->removed_maps with map->refcnt"), the symbol objects were leaked until c087e94 ("perf machine: Fix refcount usage when processing PERF_RECORD_KSYMBOL") was merged so the bug was masked. Fixes: c087e94 ("perf machine: Fix refcount usage when processing PERF_RECORD_KSYMBOL") Reported-by: Yunzhao Li <yunzhao@cloudflare.com> Signed-off-by: Matt Fleming (Cloudflare) <matt@readmodwrite.com> Cc: Ian Rogers <irogers@google.com> Cc: kernel-team@cloudflare.com Cc: Namhyung Kim <namhyung@kernel.org> Cc: Riccardo Mancini <rickyman7@gmail.com> Cc: stable@vger.kernel.org # v5.13+ Link: https://lore.kernel.org/r/20240815142212.3834625-1-matt@readmodwrite.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

The fields in the hist_entry are filled on-demand which means they only have meaningful values when relevant sort keys are used. So if neither of 'dso' nor 'sym' sort keys are used, the map/symbols in the hist entry can be garbage. So it shouldn't access it unconditionally. I got a segfault, when I wanted to see cgroup profiles. $ sudo perf record -a --all-cgroups --synth=cgroup true $ sudo perf report -s cgroup Program received signal SIGSEGV, Segmentation fault. 0x00005555557a8d90 in map__dso (map=0x0) at util/map.h:48 48 return RC_CHK_ACCESS(map)->dso; (gdb) bt #0 0x00005555557a8d90 in map__dso (map=0x0) at util/map.h:48 #1 0x00005555557aa39b in map__load (map=0x0) at util/map.c:344 #2 0x00005555557aa592 in map__find_symbol (map=0x0, addr=140736115941088) at util/map.c:385 #3 0x00005555557ef000 in hists__findnew_entry (hists=0x555556039d60, entry=0x7fffffffa4c0, al=0x7fffffffa8c0, sample_self=true) at util/hist.c:644 #4 0x00005555557ef61c in __hists__add_entry (hists=0x555556039d60, al=0x7fffffffa8c0, sym_parent=0x0, bi=0x0, mi=0x0, ki=0x0, block_info=0x0, sample=0x7fffffffaa90, sample_self=true, ops=0x0) at util/hist.c:761 #5 0x00005555557ef71f in hists__add_entry (hists=0x555556039d60, al=0x7fffffffa8c0, sym_parent=0x0, bi=0x0, mi=0x0, ki=0x0, sample=0x7fffffffaa90, sample_self=true) at util/hist.c:779 #6 0x00005555557f00fb in iter_add_single_normal_entry (iter=0x7fffffffa900, al=0x7fffffffa8c0) at util/hist.c:1015 #7 0x00005555557f09a7 in hist_entry_iter__add (iter=0x7fffffffa900, al=0x7fffffffa8c0, max_stack_depth=127, arg=0x7fffffffbce0) at util/hist.c:1260 #8 0x00005555555ba7ce in process_sample_event (tool=0x7fffffffbce0, event=0x7ffff7c14128, sample=0x7fffffffaa90, evsel=0x555556039ad0, machine=0x5555560388e8) at builtin-report.c:334 #9 0x00005555557b30c8 in evlist__deliver_sample (evlist=0x555556039010, tool=0x7fffffffbce0, event=0x7ffff7c14128, sample=0x7fffffffaa90, evsel=0x555556039ad0, machine=0x5555560388e8) at util/session.c:1232 #10 0x00005555557b32bc in machines__deliver_event (machines=0x5555560388e8, evlist=0x555556039010, event=0x7ffff7c14128, sample=0x7fffffffaa90, tool=0x7fffffffbce0, file_offset=110888, file_path=0x555556038ff0 "perf.data") at util/session.c:1271 #11 0x00005555557b3848 in perf_session__deliver_event (session=0x5555560386d0, event=0x7ffff7c14128, tool=0x7fffffffbce0, file_offset=110888, file_path=0x555556038ff0 "perf.data") at util/session.c:1354 #12 0x00005555557affaf in ordered_events__deliver_event (oe=0x555556038e60, event=0x555556135aa0) at util/session.c:132 #13 0x00005555557bb605 in do_flush (oe=0x555556038e60, show_progress=false) at util/ordered-events.c:245 #14 0x00005555557bb95c in __ordered_events__flush (oe=0x555556038e60, how=OE_FLUSH__ROUND, timestamp=0) at util/ordered-events.c:324 #15 0x00005555557bba46 in ordered_events__flush (oe=0x555556038e60, how=OE_FLUSH__ROUND) at util/ordered-events.c:342 #16 0x00005555557b1b3b in perf_event__process_finished_round (tool=0x7fffffffbce0, event=0x7ffff7c15bb8, oe=0x555556038e60) at util/session.c:780 #17 0x00005555557b3b27 in perf_session__process_user_event (session=0x5555560386d0, event=0x7ffff7c15bb8, file_offset=117688, file_path=0x555556038ff0 "perf.data") at util/session.c:1406 As you can see the entry->ms.map was NULL even if he->ms.map has a value. This is because 'sym' sort key is not given, so it cannot assume whether he->ms.sym and entry->ms.sym is the same. I only checked the 'sym' sort key here as it implies 'dso' behavior (so maps are the same). Fixes: ac01c8c ("perf hist: Update hist symbol when updating maps") Signed-off-by: Namhyung Kim <namhyung@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Matt Fleming <matt@readmodwrite.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: https://lore.kernel.org/r/20240826221045.1202305-2-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Attaching SST PCI device to VM causes "BUG: KASAN: slab-out-of-bounds". kasan report: [ 19.411889] ================================================================== [ 19.413702] BUG: KASAN: slab-out-of-bounds in _isst_if_get_pci_dev+0x3d5/0x400 [isst_if_common] [ 19.415634] Read of size 8 at addr ffff888829e65200 by task cpuhp/16/113 [ 19.417368] [ 19.418627] CPU: 16 PID: 113 Comm: cpuhp/16 Tainted: G E 6.9.0 #10 [ 19.420435] Hardware name: VMware, Inc. VMware20,1/440BX Desktop Reference Platform, BIOS VMW201.00V.20192059.B64.2207280713 07/28/2022 [ 19.422687] Call Trace: [ 19.424091] <TASK> [ 19.425448] dump_stack_lvl+0x5d/0x80 [ 19.426963] ? _isst_if_get_pci_dev+0x3d5/0x400 [isst_if_common] [ 19.428694] print_report+0x19d/0x52e [ 19.430206] ? __pfx__raw_spin_lock_irqsave+0x10/0x10 [ 19.431837] ? _isst_if_get_pci_dev+0x3d5/0x400 [isst_if_common] [ 19.433539] kasan_report+0xf0/0x170 [ 19.435019] ? _isst_if_get_pci_dev+0x3d5/0x400 [isst_if_common] [ 19.436709] _isst_if_get_pci_dev+0x3d5/0x400 [isst_if_common] [ 19.438379] ? __pfx_sched_clock_cpu+0x10/0x10 [ 19.439910] isst_if_cpu_online+0x406/0x58f [isst_if_common] [ 19.441573] ? __pfx_isst_if_cpu_online+0x10/0x10 [isst_if_common] [ 19.443263] ? ttwu_queue_wakelist+0x2c1/0x360 [ 19.444797] cpuhp_invoke_callback+0x221/0xec0 [ 19.446337] cpuhp_thread_fun+0x21b/0x610 [ 19.447814] ? __pfx_cpuhp_thread_fun+0x10/0x10 [ 19.449354] smpboot_thread_fn+0x2e7/0x6e0 [ 19.450859] ? __pfx_smpboot_thread_fn+0x10/0x10 [ 19.452405] kthread+0x29c/0x350 [ 19.453817] ? __pfx_kthread+0x10/0x10 [ 19.455253] ret_from_fork+0x31/0x70 [ 19.456685] ? __pfx_kthread+0x10/0x10 [ 19.458114] ret_from_fork_asm+0x1a/0x30 [ 19.459573] </TASK> [ 19.460853] [ 19.462055] Allocated by task 1198: [ 19.463410] kasan_save_stack+0x30/0x50 [ 19.464788] kasan_save_track+0x14/0x30 [ 19.466139] __kasan_kmalloc+0xaa/0xb0 [ 19.467465] __kmalloc+0x1cd/0x470 [ 19.468748] isst_if_cdev_register+0x1da/0x350 [isst_if_common] [ 19.470233] isst_if_mbox_init+0x108/0xff0 [isst_if_mbox_msr] [ 19.471670] do_one_initcall+0xa4/0x380 [ 19.472903] do_init_module+0x238/0x760 [ 19.474105] load_module+0x5239/0x6f00 [ 19.475285] init_module_from_file+0xd1/0x130 [ 19.476506] idempotent_init_module+0x23b/0x650 [ 19.477725] __x64_sys_finit_module+0xbe/0x130 [ 19.476506] idempotent_init_module+0x23b/0x650 [ 19.477725] __x64_sys_finit_module+0xbe/0x130 [ 19.478920] do_syscall_64+0x82/0x160 [ 19.480036] entry_SYSCALL_64_after_hwframe+0x76/0x7e [ 19.481292] [ 19.482205] The buggy address belongs to the object at ffff888829e65000 which belongs to the cache kmalloc-512 of size 512 [ 19.484818] The buggy address is located 0 bytes to the right of allocated 512-byte region [ffff888829e65000, ffff888829e65200) [ 19.487447] [ 19.488328] The buggy address belongs to the physical page: [ 19.489569] page: refcount:1 mapcount:0 mapping:0000000000000000 index:0xffff888829e60c00 pfn:0x829e60 [ 19.491140] head: order:3 entire_mapcount:0 nr_pages_mapped:0 pincount:0 [ 19.492466] anon flags: 0x57ffffc0000840(slab|head|node=1|zone=2|lastcpupid=0x1fffff) [ 19.493914] page_type: 0xffffffff() [ 19.494988] raw: 0057ffffc0000840 ffff88810004cc80 0000000000000000 0000000000000001 [ 19.496451] raw: ffff888829e60c00 0000000080200018 00000001ffffffff 0000000000000000 [ 19.497906] head: 0057ffffc0000840 ffff88810004cc80 0000000000000000 0000000000000001 [ 19.499379] head: ffff888829e60c00 0000000080200018 00000001ffffffff 0000000000000000 [ 19.500844] head: 0057ffffc0000003 ffffea0020a79801 ffffea0020a79848 00000000ffffffff [ 19.502316] head: 0000000800000000 0000000000000000 00000000ffffffff 0000000000000000 [ 19.503784] page dumped because: kasan: bad access detected [ 19.505058] [ 19.505970] Memory state around the buggy address: [ 19.507172] ffff888829e65100: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 19.508599] ffff888829e65180: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 19.510013] >ffff888829e65200: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 19.510014] ^ [ 19.510016] ffff888829e65280: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 19.510018] ffff888829e65300: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 19.515367] ================================================================== The reason for this error is physical_package_ids assigned by VMware VMM are not continuous and have gaps. This will cause value returned by topology_physical_package_id() to be more than topology_max_packages(). Here the allocation uses topology_max_packages(). The call to topology_max_packages() returns maximum logical package ID not physical ID. Hence use topology_logical_package_id() instead of topology_physical_package_id(). Fixes: 9a1aac8 ("platform/x86: ISST: PUNIT device mapping with Sub-NUMA clustering") Cc: stable@vger.kernel.org Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Zach Wade <zachwade.k@gmail.com> Link: https://lore.kernel.org/r/20240923144508.1764-1-zachwade.k@gmail.com Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>

Fix __hci_cmd_sync_sk() to return not NULL for unknown opcodes. __hci_cmd_sync_sk() returns NULL if a command returns a status event. However, it also returns NULL where an opcode doesn't exist in the hci_cc table because hci_cmd_complete_evt() assumes status = skb->data[0] for unknown opcodes. This leads to null-ptr-deref in cmd_sync for HCI_OP_READ_LOCAL_CODECS as there is no hci_cc for HCI_OP_READ_LOCAL_CODECS, which always assumes status = skb->data[0]. KASAN: null-ptr-deref in range [0x0000000000000070-0x0000000000000077] CPU: 1 PID: 2000 Comm: kworker/u9:5 Not tainted 6.9.0-ga6bcb805883c-dirty #10 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014 Workqueue: hci7 hci_power_on RIP: 0010:hci_read_supported_codecs+0xb9/0x870 net/bluetooth/hci_codec.c:138 Code: 08 48 89 ef e8 b8 c1 8f fd 48 8b 75 00 e9 96 00 00 00 49 89 c6 48 ba 00 00 00 00 00 fc ff df 4c 8d 60 70 4c 89 e3 48 c1 eb 03 <0f> b6 04 13 84 c0 0f 85 82 06 00 00 41 83 3c 24 02 77 0a e8 bf 78 RSP: 0018:ffff888120bafac8 EFLAGS: 00010212 RAX: 0000000000000000 RBX: 000000000000000e RCX: ffff8881173f0040 RDX: dffffc0000000000 RSI: ffffffffa58496c0 RDI: ffff88810b9ad1e4 RBP: ffff88810b9ac000 R08: ffffffffa77882a7 R09: 1ffffffff4ef1054 R10: dffffc0000000000 R11: fffffbfff4ef1055 R12: 0000000000000070 R13: 0000000000000000 R14: 0000000000000000 R15: ffff88810b9ac000 FS: 0000000000000000(0000) GS:ffff8881f6c00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f6ddaa3439e CR3: 0000000139764003 CR4: 0000000000770ef0 PKRU: 55555554 Call Trace: <TASK> hci_read_local_codecs_sync net/bluetooth/hci_sync.c:4546 [inline] hci_init_stage_sync net/bluetooth/hci_sync.c:3441 [inline] hci_init4_sync net/bluetooth/hci_sync.c:4706 [inline] hci_init_sync net/bluetooth/hci_sync.c:4742 [inline] hci_dev_init_sync net/bluetooth/hci_sync.c:4912 [inline] hci_dev_open_sync+0x19a9/0x2d30 net/bluetooth/hci_sync.c:4994 hci_dev_do_open net/bluetooth/hci_core.c:483 [inline] hci_power_on+0x11e/0x560 net/bluetooth/hci_core.c:1015 process_one_work kernel/workqueue.c:3267 [inline] process_scheduled_works+0x8ef/0x14f0 kernel/workqueue.c:3348 worker_thread+0x91f/0xe50 kernel/workqueue.c:3429 kthread+0x2cb/0x360 kernel/kthread.c:388 ret_from_fork+0x4d/0x80 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244 Fixes: abfeea4 ("Bluetooth: hci_sync: Convert MGMT_OP_START_DISCOVERY") Signed-off-by: Sungwoo Kim <iam@sung-woo.kim> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

Daniel Machon says: ==================== net: sparx5: add support for lan969x switch device == Description: This series is the second of a multi-part series, that prepares and adds support for the new lan969x switch driver. The upstreaming efforts is split into multiple series (might change a bit as we go along): 1) Prepare the Sparx5 driver for lan969x (merged) --> 2) add support lan969x (same basic features as Sparx5 provides excl. FDMA and VCAP). 3) Add support for lan969x VCAP, FDMA and RGMII == Lan969x in short: The lan969x Ethernet switch family [1] provides a rich set of switching features and port configurations (up to 30 ports) from 10Mbps to 10Gbps, with support for RGMII, SGMII, QSGMII, USGMII, and USXGMII, ideal for industrial & process automation infrastructure applications, transport, grid automation, power substation automation, and ring & intra-ring topologies. The LAN969x family is hardware and software compatible and scalable supporting 46Gbps to 102Gbps switch bandwidths. == Preparing Sparx5 for lan969x: The main preparation work for lan969x has already been merged [1]. After this series is applied, lan969x will have the same functionality as Sparx5, except for VCAP and FDMA support. QoS features that requires the VCAP (e.g. PSFP, port mirroring) will obviously not work until VCAP support is added later. == Patch breakdown: Patch #1-#4 do some preparation work for lan969x Patch #5 adds new registers required by lan969x Patch #6 adds initial match data for all lan969x targets Patch #7 defines the lan969x register differences Patch #8 adds lan969x constants to match data Patch #9 adds some lan969x ops in bulk Patch #10 adds PTP function to ops Patch #11 adds lan969x_calendar.c for calculating the calendar Patch #12 makes additional use of the is_sparx5() macro to branch out in certain places. Patch #13 documents lan969x in the dt-bindings Patch #14 adds lan969x compatible string to sparx5 driver Patch #15 introduces new concept of per-target features [1] https://lore.kernel.org/netdev/20241004-b4-sparx5-lan969x-switch-driver-v2-0-d3290f581663@microchip.com/ v1: https://lore.kernel.org/20241021-sparx5-lan969x-switch-driver-2-v1-0-c8c49ef21e0f@microchip.com ==================== Link: https://patch.msgid.link/20241024-sparx5-lan969x-switch-driver-2-v2-0-a0b5fae88a0f@microchip.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>

syzkaller reported a warning in __sk_skb_reason_drop(). Commit 61b95c7 ("net: ip: make ip_route_input_rcu() return drop reasons") missed a path where -EINVAL is returned. Then, the cited commit started to trigger the warning with the invalid error. Let's fix it by returning SKB_DROP_REASON_NOT_SPECIFIED. [0]: WARNING: CPU: 0 PID: 10 at net/core/skbuff.c:1216 __sk_skb_reason_drop net/core/skbuff.c:1216 [inline] WARNING: CPU: 0 PID: 10 at net/core/skbuff.c:1216 sk_skb_reason_drop+0x97/0x1b0 net/core/skbuff.c:1241 Modules linked in: CPU: 0 UID: 0 PID: 10 Comm: kworker/0:1 Not tainted 6.12.0-10686-gbb18265c3aba #10 1c308307628619808b5a4a0495c4aab5637b0551 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014 Workqueue: wg-crypt-wg2 wg_packet_decrypt_worker RIP: 0010:__sk_skb_reason_drop net/core/skbuff.c:1216 [inline] RIP: 0010:sk_skb_reason_drop+0x97/0x1b0 net/core/skbuff.c:1241 Code: 5d 41 5c 41 5d 41 5e e9 e7 9e 95 fd e8 e2 9e 95 fd 31 ff 44 89 e6 e8 58 a1 95 fd 45 85 e4 0f 85 a2 00 00 00 e8 ca 9e 95 fd 90 <0f> 0b 90 e8 c1 9e 95 fd 44 89 e6 bf 01 00 00 00 e8 34 a1 95 fd 41 RSP: 0018:ffa0000000007650 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 000000000000ffff RCX: ffffffff83bc3592 RDX: ff110001002a0000 RSI: ffffffff83bc34d6 RDI: 0000000000000007 RBP: ff11000109ee85f0 R08: 0000000000000001 R09: ffe21c00213dd0da R10: 000000000000ffff R11: 0000000000000000 R12: 00000000ffffffea R13: 0000000000000000 R14: ff11000109ee86d4 R15: ff11000109ee8648 FS: 0000000000000000(0000) GS:ff1100011a000000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000020177000 CR3: 0000000108a3d006 CR4: 0000000000771ef0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe07f0 DR7: 0000000000000600 PKRU: 55555554 Call Trace: <IRQ> kfree_skb_reason include/linux/skbuff.h:1263 [inline] ip_rcv_finish_core.constprop.0+0x896/0x2320 net/ipv4/ip_input.c:424 ip_list_rcv_finish.constprop.0+0x1b2/0x710 net/ipv4/ip_input.c:610 ip_sublist_rcv net/ipv4/ip_input.c:636 [inline] ip_list_rcv+0x34a/0x460 net/ipv4/ip_input.c:670 __netif_receive_skb_list_ptype net/core/dev.c:5715 [inline] __netif_receive_skb_list_core+0x536/0x900 net/core/dev.c:5762 __netif_receive_skb_list net/core/dev.c:5814 [inline] netif_receive_skb_list_internal+0x77c/0xdc0 net/core/dev.c:5905 gro_normal_list include/net/gro.h:515 [inline] gro_normal_list include/net/gro.h:511 [inline] napi_complete_done+0x219/0x8c0 net/core/dev.c:6256 wg_packet_rx_poll+0xbff/0x1e40 drivers/net/wireguard/receive.c:488 __napi_poll.constprop.0+0xb3/0x530 net/core/dev.c:6877 napi_poll net/core/dev.c:6946 [inline] net_rx_action+0x9eb/0xe30 net/core/dev.c:7068 handle_softirqs+0x1ac/0x740 kernel/softirq.c:554 do_softirq kernel/softirq.c:455 [inline] do_softirq+0x48/0x80 kernel/softirq.c:442 </IRQ> <TASK> __local_bh_enable_ip+0xed/0x110 kernel/softirq.c:382 spin_unlock_bh include/linux/spinlock.h:396 [inline] ptr_ring_consume_bh include/linux/ptr_ring.h:367 [inline] wg_packet_decrypt_worker+0x3ba/0x580 drivers/net/wireguard/receive.c:499 process_one_work+0x940/0x1a70 kernel/workqueue.c:3229 process_scheduled_works kernel/workqueue.c:3310 [inline] worker_thread+0x639/0xe30 kernel/workqueue.c:3391 kthread+0x283/0x350 kernel/kthread.c:389 ret_from_fork+0x45/0x80 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x11/0x20 arch/x86/entry/entry_64.S:244 </TASK> Fixes: 82d9983 ("net: ip: make ip_route_input_noref() return drop reasons") Reported-by: syzkaller <syzkaller@googlegroups.com> Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Reviewed-by: David Ahern <dsahern@kernel.org> Link: https://patch.msgid.link/20241206020715.80207-1-kuniyu@amazon.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Hou Tao says: ==================== The use of migrate_{disable|enable} pair in BPF is mainly due to the introduction of bpf memory allocator and the use of per-CPU data struct in its internal implementation. The caller needs to disable migration before invoking the alloc or free APIs of bpf memory allocator, and enable migration after the invocation. The main users of bpf memory allocator are various kind of bpf maps in which the map values or the special fields in the map values are allocated by using bpf memory allocator. At present, the running context for bpf program has already disabled migration explictly or implictly, therefore, when these maps are manipulated in bpf program, it is OK to not invoke migrate_disable() and migrate_enable() pair. Howevers, it is not always the case when these maps are manipulated through bpf syscall, therefore many migrate_{disable|enable} pairs are added when the map can either be manipulated by BPF program or BPF syscall. The initial idea of reducing the use of migrate_{disable|enable} comes from Alexei [1]. I turned it into a patch set that archives the goals through the following three methods: 1. remove unnecessary migrate_{disable|enable} pair when the BPF syscall path also disables migration, it is OK to remove the pair. Patch #1~#3 fall into this category, while patch #4~#5 are partially included. 2. move the migrate_{disable|enable} pair from inner callee to outer caller Instead of invoking migrate_disable() in the inner callee, invoking migrate_disable() in the outer caller to simplify reasoning about when migrate_disable() is needed. Patch #4~#5 and patch #6~#19 belongs to this category. 3. add cant_migrate() check in the inner callee Add cant_migrate() check in the inner callee to ensure the guarantee that migration is disabled is not broken. Patch #1~#5, #13, #16~#19 also belong to this category. Please check the individual patches for more details. Comments are always welcome. Change Log: v2: * sqaush the ->map_free related patches (#10~#12, #15) into one patch * remove unnecessary cant_migrate() checks. v1: https://lore.kernel.org/bpf/20250106081900.1665573-1-houtao@huaweicloud.com ==================== Link: https://patch.msgid.link/20250108010728.207536-1-houtao@huaweicloud.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>

libtraceevent parses and returns an array of argument fields, sometimes larger than RAW_SYSCALL_ARGS_NUM (6) because it includes "__syscall_nr", idx will traverse to index 6 (7th element) whereas sc->fmt->arg holds 6 elements max, creating an out-of-bounds access. This runtime error is found by UBsan. The error message: $ sudo UBSAN_OPTIONS=print_stacktrace=1 ./perf trace -a --max-events=1 builtin-trace.c:1966:35: runtime error: index 6 out of bounds for type 'syscall_arg_fmt [6]' #0 0x5c04956be5fe in syscall__alloc_arg_fmts /home/howard/hw/linux-perf/tools/perf/builtin-trace.c:1966 #1 0x5c04956c0510 in trace__read_syscall_info /home/howard/hw/linux-perf/tools/perf/builtin-trace.c:2110 #2 0x5c04956c372b in trace__syscall_info /home/howard/hw/linux-perf/tools/perf/builtin-trace.c:2436 #3 0x5c04956d2f39 in trace__init_syscalls_bpf_prog_array_maps /home/howard/hw/linux-perf/tools/perf/builtin-trace.c:3897 #4 0x5c04956d6d25 in trace__run /home/howard/hw/linux-perf/tools/perf/builtin-trace.c:4335 #5 0x5c04956e112e in cmd_trace /home/howard/hw/linux-perf/tools/perf/builtin-trace.c:5502 #6 0x5c04956eda7d in run_builtin /home/howard/hw/linux-perf/tools/perf/perf.c:351 #7 0x5c04956ee0a8 in handle_internal_command /home/howard/hw/linux-perf/tools/perf/perf.c:404 #8 0x5c04956ee37f in run_argv /home/howard/hw/linux-perf/tools/perf/perf.c:448 #9 0x5c04956ee8e9 in main /home/howard/hw/linux-perf/tools/perf/perf.c:556 #10 0x79eb3622a3b7 in __libc_start_call_main ../sysdeps/nptl/libc_start_call_main.h:58 #11 0x79eb3622a47a in __libc_start_main_impl ../csu/libc-start.c:360 #12 0x5c04955422d4 in _start (/home/howard/hw/linux-perf/tools/perf/perf+0x4e02d4) (BuildId: 5b6cab2d59e96a4341741765ad6914a4d784dbc6) 0.000 ( 0.014 ms): Chrome_ChildIO/117244 write(fd: 238, buf: !, count: 1) = 1 Fixes: 5e58fcf ("perf trace: Allow allocating sc->arg_fmt even without the syscall tracepoint") Signed-off-by: Howard Chu <howardchu95@gmail.com> Link: https://lore.kernel.org/r/20250122025519.361873-1-howardchu95@gmail.com Signed-off-by: Namhyung Kim <namhyung@kernel.org>

steal the (clever) algorithm from get_random_u32_below() this fixes a bug where we were passing roundup_pow_of_two() a 64 bit number - we're squaring device latencies now: [ +1.681698] ------------[ cut here ]------------ [ +0.000010] UBSAN: shift-out-of-bounds in ./include/linux/log2.h:57:13 [ +0.000011] shift exponent 64 is too large for 64-bit type 'long unsigned int' [ +0.000011] CPU: 1 UID: 0 PID: 196 Comm: kworker/u32:13 Not tainted 6.14.0-rc6-dave+ #10 [ +0.000012] Hardware name: ASUS System Product Name/PRIME B460I-PLUS, BIOS 1301 07/13/2021 [ +0.000005] Workqueue: events_unbound __bch2_read_endio [bcachefs] [ +0.000354] Call Trace: [ +0.000005] <TASK> [ +0.000007] dump_stack_lvl+0x5d/0x80 [ +0.000018] ubsan_epilogue+0x5/0x30 [ +0.000008] __ubsan_handle_shift_out_of_bounds.cold+0x61/0xe6 [ +0.000011] bch2_rand_range.cold+0x17/0x20 [bcachefs] [ +0.000231] bch2_bkey_pick_read_device+0x547/0x920 [bcachefs] [ +0.000229] __bch2_read_extent+0x1e4/0x18e0 [bcachefs] [ +0.000241] ? bch2_btree_iter_peek_slot+0x3df/0x800 [bcachefs] [ +0.000180] ? bch2_read_retry_nodecode+0x270/0x330 [bcachefs] [ +0.000230] bch2_read_retry_nodecode+0x270/0x330 [bcachefs] [ +0.000230] bch2_rbio_retry+0x1fa/0x600 [bcachefs] [ +0.000224] ? bch2_printbuf_make_room+0x71/0xb0 [bcachefs] [ +0.000243] ? bch2_read_csum_err+0x4a4/0x610 [bcachefs] [ +0.000278] bch2_read_csum_err+0x4a4/0x610 [bcachefs] [ +0.000227] ? __bch2_read_endio+0x58b/0x870 [bcachefs] [ +0.000220] __bch2_read_endio+0x58b/0x870 [bcachefs] [ +0.000268] ? try_to_wake_up+0x31c/0x7f0 [ +0.000011] ? process_one_work+0x176/0x330 [ +0.000008] process_one_work+0x176/0x330 [ +0.000008] worker_thread+0x252/0x390 [ +0.000008] ? __pfx_worker_thread+0x10/0x10 [ +0.000006] kthread+0xec/0x230 [ +0.000011] ? __pfx_kthread+0x10/0x10 [ +0.000009] ret_from_fork+0x31/0x50 [ +0.000009] ? __pfx_kthread+0x10/0x10 [ +0.000008] ret_from_fork_asm+0x1a/0x30 [ +0.000012] </TASK> [ +0.000046] ---[ end trace ]--- Reported-by: Roland Vet <vet.roland@protonmail.com> Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Chia-Yu Chang says: ==================== AccECN protocol preparation patch series Please find the v7 v7 (03-Mar-2025) - Move 2 new patches added in v6 to the next AccECN patch series v6 (27-Dec-2024) - Avoid removing removing the potential CA_ACK_WIN_UPDATE in ack_ev_flags of patch #1 (Eric Dumazet <edumazet@google.com>) - Add reviewed-by tag in patches #2, #3, #4, #5, #6, #7, #8, #12, #14 - Foloiwng 2 new pathces are added after patch #9 (Patch that adds SKB_GSO_TCP_ACCECN) * New patch #10 to replace exisiting SKB_GSO_TCP_ECN with SKB_GSO_TCP_ACCECN in the driver to avoid CWR flag corruption * New patch #11 adds AccECN for virtio by adding new negotiation flag (VIRTIO_NET_F_HOST/GUEST_ACCECN) in feature handshake and translating Accurate ECN GSO flag between virtio_net_hdr (VIRTIO_NET_HDR_GSO_ACCECN) and skb header (SKB_GSO_TCP_ACCECN) - Add detailed changelog and comments in #13 (Eric Dumazet <edumazet@google.com>) - Move patch #14 to the next AccECN patch series (Eric Dumazet <edumazet@google.com>) v5 (5-Nov-2024) - Add helper function "tcp_flags_ntohs" to preserve last 2 bytes of TCP flags of patch #4 (Paolo Abeni <pabeni@redhat.com>) - Fix reverse X-max tree order of patches #4, #11 (Paolo Abeni <pabeni@redhat.com>) - Rename variable "delta" as "timestamp_delta" of patch #2 fo clariety - Remove patch #14 in this series (Paolo Abeni <pabeni@redhat.com>, Joel Granados <joel.granados@kernel.org>) v4 (21-Oct-2024) - Fix line length warning of patches #2, #4, #8, #10, #11, #14 - Fix spaces preferred around '|' (ctx:VxV) warning of patch #7 - Add missing CC'ed of patches #4, #12, #14 v3 (19-Oct-2024) - Fix build error in v2 v2 (18-Oct-2024) - Fix warning caused by NETIF_F_GSO_ACCECN_BIT in patch #9 (Jakub Kicinski <kuba@kernel.org>) The full patch series can be found in https://github.com/L4STeam/linux-net-next/commits/upstream_l4steam/ The Accurate ECN draft can be found in https://datatracker.ietf.org/doc/html/draft-ietf-tcpm-accurate-ecn-28 ==================== Signed-off-by: David S. Miller <davem@davemloft.net>

bergwolf added 2 commits June 5, 2013 18:07

staging/lustre/mdc: fix procfs fops

30caa30

mdc_kuc_fops is missing open/release handlers. I fixed it before but somehow forgot to amend to the patch sent out. Sorry... Signed-off-by: Peng Tao <tao.peng@emc.com>

bergwolf closed this Oct 29, 2013

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

Fix mdc_kuc_fops and cleanup libcfs_kkuc_msg_put a bit #10

Fix mdc_kuc_fops and cleanup libcfs_kkuc_msg_put a bit #10

bergwolf commented Jun 5, 2013

Fix mdc_kuc_fops and cleanup libcfs_kkuc_msg_put a bit #10

Fix mdc_kuc_fops and cleanup libcfs_kkuc_msg_put a bit #10

Conversation

bergwolf commented Jun 5, 2013