Insnrg custom integration

The Insnrg custom integration sets up 33 sensors:

• SPA
• Filter Mode
• Set Spa Temperature
• Set Pool Temperature
• Current pH
• Set Point pH
• Current ORP
• Set Point ORP
• pH Connected
• ORP Connected
• Pool Current Temperature
• Outlet data for each of the 3 Vi-Outlets and 4 Hub-Outlets:
  • Waterfall, Jet Pump, Lights, In Floor, Ozone, Blower
• Valve data for each of the 3 Vi-Valves and 4 Hub-Valves
  • Waterfall, Feature
• Timer data for each of the 4 timers:
  • Chlorinator
  • Enabled

---

Installing the Insnrg Custom Integration in Home Assistant via HACS

This guide will walk you through the steps to install and set up the Insnrg custom integration in Home Assistant via the Home Assistant Community Store (HACS).

Prerequisites

• Home Assistant must already be installed and configured on your system.
• HACS should be installed. If not, follow the instructions at HACS Installation.
• NOTES: Please contact insnrgdev@insnrg.com to request access to Insnrg 3rd Party REST API, and enable Voice Control in Connected Systems screen.

Step-by-Step Guide

1. Open HACS

• In Home Assistant, navigate to the side menu and click on "HACS".

2. Add Custom Repository

• Click on the three dots menu at the top right in HACS.
• Select "Custom Repositories".

3. Add Repository

• In the "Add Custom Repository URL" field, paste the following URL:

  https://github.com/jaringuyen/InsnrgHomeAssistance
  
• Under "Category", select "Integration".
• Click on "Add".

4. Install Integration

• After adding, the integration should be available in HACS.
• Search for "insnrg" in the HACS integrations list.
• Click on the integration and then click "Install this repository".
• Confirm the installation by clicking "Install".

5. Restart Home Assistant

• After installation, you need to restart Home Assistant to load the integration.
• Go to "Settings" > "System" > "Restart" and click on "Restart".

6. Set Up Integration

• After the restart, navigate to "Settings" > "Devices & Services".
• Click on "Add Integration" (the "+" symbol at the bottom right).
• Search for "insnrg".
• Select the integration from the list.

7. Enter Credentials

• Enter your email address and password that you use to log in to https://www.insnrgapp.com.
• Click "Submit" or "Next" to complete the setup.

8. Verify Installation

• After successful setup, the sensors for your chlorinator will be created.
• You can view them under "Settings" > "Devices & Services".
• Add the desired sensors to your dashboard to display the data.