Silabs doc updates

examples/light-switch-app/efr32/README.md

@@ -1,41 +1,56 @@
-# CHIP EFR32 Light Switch Example
+# Matter EFR32 Light Switch Example
 
-An example showing the use of CHIP on the Silicon Labs EFR32 MG12.
+An example showing the use of CHIP on the Silicon Labs EFR32 MG12 and MG24.
 
 <hr>
 
--   [CHIP EFR32 Light Switch Example](#chip-efr32-light-switch-example)
+-   [Matter EFR32 Light Switch Example](#matter-efr32-light-switch-example)
     -   [Introduction](#introduction)
     -   [Building](#building)
-        -   [Note](#note)
+        -   [Linux](#linux)
+        -   [Mac OS X](#mac-os-x)
     -   [Flashing the Application](#flashing-the-application)
     -   [Viewing Logging Output](#viewing-logging-output)
     -   [Running the Complete Example](#running-the-complete-example)
         -   [Notes](#notes)
+            -   [On Border Router:](#on-border-router)
+            -   [On PC(Linux):](#on-pclinux)
     -   [Running RPC console](#running-rpc-console)
     -   [Memory settings](#memory-settings)
     -   [OTA Software Update](#ota-software-update)
+    -   [Building options](#building-options)
+        -   [Disabling logging](#disabling-logging)
+        -   [Debug build / release build](#debug-build--release-build)
+        -   [Disabling LCD](#disabling-lcd)
+        -   [KVS maximum entry count](#kvs-maximum-entry-count)
 
 <hr>
 
+> **NOTE:** Silicon Laboratories now maintains a public matter GitHub repo with
+> frequent releases thoroughly tested and validated. Developers looking to
+> develop matter products with silabs hardware are encouraged to use our latest
+> release with added tools and documentation.
+> [Silabs Matter Github](https://github.com/SiliconLabs/matter/releases)
+
 <a name="intro"></a>
 
 ## Introduction
 
 The EFR32 light switch example provides a baseline demonstration of a on-off
-light switch device, built using CHIP and the Silicon Labs gecko SDK. It can be
-controlled by a Chip controller over Openthread network.
+light switch device, built using Matter and the Silicon Labs gecko SDK. It can
+be controlled by a Chip controller over an Openthread or Wifi network.
 
 The EFR32 device can be commissioned over Bluetooth Low Energy where the device
 and the Chip controller will exchange security information with the Rendez-vous
-procedure. Thread Network credentials are then provided to the EFR32 device
-which will then join the network.
+procedure. If using Thread, Thread Network credentials are then provided to the
+EFR32 device which will then join the network.
 
-The LCD on the Silabs WSTK shows a QR Code containing the needed commissioning
-information for the BLE connection and starting the Rendez-vous procedure.
+If the LCD is enabled, the LCD on the Silabs WSTK shows a QR Code containing the
+needed commissioning information for the BLE connection and starting the
+Rendez-vous procedure.
 
 The light switch example is intended to serve both as a means to explore the
-workings of CHIP as well as a template for creating real products based on the
+workings of Matter as well as a template for creating real products based on the
 Silicon Labs platform.
 
 <a name="building"></a>
@@ -55,14 +70,43 @@ Silicon Labs platform.
 
 #### Linux
 
-    $ sudo apt-get install git libwebkitgtk-1.0-0 ninja-build```
+    $ sudo apt-get install git ninja-build
 
 #### Mac OS X
 
     $ brew install ninja
 
 -   Supported hardware:
 
+    -   > For the latest supported hardware please refer to the
+        > [Hardware Requirements](https://github.com/SiliconLabs/matter/blob/latest/docs/silabs/general/HARDWARE_REQUIREMENTS.md)
+        > in the Silicon Labs Matter Github Repo
+
+    MG12 boards:
+
+    -   BRD4161A / SLWSTK6000B / Wireless Starter Kit / 2.4GHz@19dBm
+    -   BRD4162A / SLWSTK6000B / Wireless Starter Kit / 2.4GHz@10dBm
+    -   BRD4163A / SLWSTK6000B / Wireless Starter Kit / 2.4GHz@10dBm,
+        868MHz@19dBm
+    -   BRD4164A / SLWSTK6000B / Wireless Starter Kit / 2.4GHz@19dBm
+    -   BRD4166A / SLTB004A / Thunderboard Sense 2 / 2.4GHz@10dBm
+    -   BRD4170A / SLWSTK6000B / Multiband Wireless Starter Kit / 2.4GHz@19dBm,
+        915MHz@19dBm
+    -   BRD4304A / SLWSTK6000B / MGM12P Module / 2.4GHz@19dBm
+
+    MG21 boards: Currently not supported due to RAM limitation.
+
+    -   BRD4180A / SLWSTK6006A / Wireless Starter Kit / 2.4GHz@20dBm
+
+    MG24 boards :
+
+    -   BRD2601B / SLWSTK6000B / Wireless Starter Kit / 2.4GHz@10dBm
+    -   BRD2703A / SLWSTK6000B / Wireless Starter Kit / 2.4GHz@10dBm
+    -   BRD4186A / SLWSTK6006A / Wireless Starter Kit / 2.4GHz@10dBm
+    -   BRD4186C / SLWSTK6006A / Wireless Starter Kit / 2.4GHz@10dBm
+    -   BRD4187A / SLWSTK6006A / Wireless Starter Kit / 2.4GHz@20dBm
+    -   BRD4187C / SLWSTK6006A / Wireless Starter Kit / 2.4GHz@20dBm
+
     MG12 boards:
 
     -   BRD4161A / SLWSTK6000B / Wireless Starter Kit / 2.4GHz@19dBm

examples/lighting-app/efr32/README.md

@@ -1,13 +1,12 @@
-# CHIP EFR32 Lighting Example
+# Matter EFR32 Lighting Example
 
-An example showing the use of CHIP on the Silicon Labs EFR32 MG12.
+An example showing the use of CHIP on the Silicon Labs EFR32 MG12 and MG24.
 
 <hr>
 
--   [CHIP EFR32 Lighting Example](#chip-efr32-lighting-example)
+-   [Matter EFR32 Lighting Example](#matter-efr32-lighting-example)
     -   [Introduction](#introduction)
     -   [Building](#building)
-        -   [Note](#note)
     -   [Flashing the Application](#flashing-the-application)
     -   [Viewing Logging Output](#viewing-logging-output)
     -   [Running the Complete Example](#running-the-complete-example)
@@ -16,27 +15,40 @@ An example showing the use of CHIP on the Silicon Labs EFR32 MG12.
     -   [Device Tracing](#device-tracing)
     -   [Memory settings](#memory-settings)
     -   [OTA Software Update](#ota-software-update)
+    -   [Group Communication (Multicast)](#group-communication-multicast)
+    -   [Building options](#building-options)
+        -   [Disabling logging](#disabling-logging)
+        -   [Debug build / release build](#debug-build--release-build)
+        -   [Disabling LCD](#disabling-lcd)
+        -   [KVS maximum entry count](#kvs-maximum-entry-count)
 
 <hr>
 
+> **NOTE:** Silicon Laboratories now maintains a public matter GitHub repo with
+> frequent releases thoroughly tested and validated. Developers looking to
+> develop matter products with silabs hardware are encouraged to use our latest
+> release with added tools and documentation.
+> [Silabs Matter Github](https://github.com/SiliconLabs/matter/releases)
+
 <a name="intro"></a>
 
 ## Introduction
 
 The EFR32 lighting example provides a baseline demonstration of a Light control
-device, built using CHIP and the Silicon Labs gecko SDK. It can be controlled by
-a Chip controller over Openthread network..
+device, built using Matter and the Silicon Labs gecko SDK. It can be controlled
+by a Chip controller over an Openthread or Wifi network..
 
 The EFR32 device can be commissioned over Bluetooth Low Energy where the device
 and the Chip controller will exchange security information with the Rendez-vous
-procedure. Thread Network credentials are then provided to the EFR32 device
-which will then join the network.
+procedure. If using Thread, Thread Network credentials are then provided to the
+EFR32 device which will then join the Thread network.
 
-The LCD on the Silabs WSTK shows a QR Code containing the needed commissioning
-information for the BLE connection and starting the Rendez-vous procedure.
+If the LCD is enabled, the LCD on the Silabs WSTK shows a QR Code containing the
+needed commissioning information for the BLE connection and starting the
+Rendez-vous procedure.
 
 The lighting example is intended to serve both as a means to explore the
-workings of CHIP as well as a template for creating real products based on the
+workings of Matter as well as a template for creating real products based on the
 Silicon Labs platform.
 
 <a name="building"></a>
@@ -54,12 +66,41 @@ Silicon Labs platform.
 
 -   Install some additional tools (likely already present for CHIP developers):
 
-    -   Linux: `sudo apt-get install git libwebkitgtk-1.0-0 ninja-build`
+    -   Linux: `sudo apt-get install git ninja-build`
 
     -   Mac OS X: `brew install ninja`
 
 -   Supported hardware:
 
+    -   > For the latest supported hardware please refer to the
+        > [Hardware Requirements](https://github.com/SiliconLabs/matter/blob/latest/docs/silabs/general/HARDWARE_REQUIREMENTS.md)
+        > in the Silicon Labs Matter Github Repo
+
+    MG12 boards:
+
+    -   BRD4161A / SLWSTK6000B / Wireless Starter Kit / 2.4GHz@19dBm
+    -   BRD4162A / SLWSTK6000B / Wireless Starter Kit / 2.4GHz@10dBm
+    -   BRD4163A / SLWSTK6000B / Wireless Starter Kit / 2.4GHz@10dBm,
+        868MHz@19dBm
+    -   BRD4164A / SLWSTK6000B / Wireless Starter Kit / 2.4GHz@19dBm
+    -   BRD4166A / SLTB004A / Thunderboard Sense 2 / 2.4GHz@10dBm
+    -   BRD4170A / SLWSTK6000B / Multiband Wireless Starter Kit / 2.4GHz@19dBm,
+        915MHz@19dBm
+    -   BRD4304A / SLWSTK6000B / MGM12P Module / 2.4GHz@19dBm
+
+    MG21 boards: Currently not supported due to RAM limitation.
+
+    -   BRD4180A / SLWSTK6006A / Wireless Starter Kit / 2.4GHz@20dBm
+
+    MG24 boards :
+
+    -   BRD2601B / SLWSTK6000B / Wireless Starter Kit / 2.4GHz@10dBm
+    -   BRD2703A / SLWSTK6000B / Wireless Starter Kit / 2.4GHz@10dBm
+    -   BRD4186A / SLWSTK6006A / Wireless Starter Kit / 2.4GHz@10dBm
+    -   BRD4186C / SLWSTK6006A / Wireless Starter Kit / 2.4GHz@10dBm
+    -   BRD4187A / SLWSTK6006A / Wireless Starter Kit / 2.4GHz@20dBm
+    -   BRD4187C / SLWSTK6006A / Wireless Starter Kit / 2.4GHz@20dBm
+
     MG12 boards:
 
     -   BRD4161A / SLWSTK6000B / Wireless Starter Kit / 2.4GHz@19dBm

examples/lock-app/efr32/README.md

@@ -1,40 +1,51 @@
-#CHIP EFR32 Lock Example
+# Matter EFR32 Lock Example
 
-An example showing the use of CHIP on the Silicon Labs EFR32 MG12.
+An example showing the use of CHIP on the Silicon Labs EFR32 MG12 and MG24.
 
 <hr>
 
--   [CHIP EFR32 Lock Example](#chip-efr32-lock-example)
+-   [Matter EFR32 Lock Example](#matter-efr32-lock-example)
     -   [Introduction](#introduction)
     -   [Building](#building)
-        -   [Note](#note)
     -   [Flashing the Application](#flashing-the-application)
     -   [Viewing Logging Output](#viewing-logging-output)
     -   [Running the Complete Example](#running-the-complete-example)
         -   [Notes](#notes)
     -   [Memory settings](#memory-settings)
     -   [OTA Software Update](#ota-software-update)
+    -   [Building options](#building-options)
+        -   [Disabling logging](#disabling-logging)
+        -   [Debug build / release build](#debug-build--release-build)
+        -   [Disabling LCD](#disabling-lcd)
+        -   [KVS maximum entry count](#kvs-maximum-entry-count)
 
 <hr>
 
+> **NOTE:** Silicon Laboratories now maintains a public matter GitHub repo with
+> frequent releases thoroughly tested and validated. Developers looking to
+> develop matter products with silabs hardware are encouraged to use our latest
+> release with added tools and documentation.
+> [Silabs Matter Github](https://github.com/SiliconLabs/matter/releases)
+
 <a name="intro"></a>
 
 ## Introduction
 
 The EFR32 lock example provides a baseline demonstration of a door lock control
-device, built using CHIP and the Silicon Labs gecko SDK. It can be controlled by
-a Chip controller over Openthread network..
+device, built using Matter and the Silicon Labs gecko SDK. It can be controlled
+by a Chip controller over an Openthread or Wifi network..
 
 The EFR32 device can be commissioned over Bluetooth Low Energy where the device
 and the Chip controller will exchange security information with the Rendez-vous
-procedure. Thread Network credentials are then provided to the EFR32 device
-which will then join the network.
+procedure. If using Thread, Thread Network credentials are then provided to the
+EFR32 device which will then join the Thread network.
 
-The LCD on the Silabs WSTK shows a QR Code containing the needed commissioning
-information for the BLE connection and starting the Rendez-vous procedure.
+If the LCD is enabled, the LCD on the Silabs WSTK shows a QR Code containing the
+needed commissioning information for the BLE connection and starting the
+Rendez-vous procedure.
 
 The lighting example is intended to serve both as a means to explore the
-workings of CHIP as well as a template for creating real products based on the
+workings of Matter as well as a template for creating real products based on the
 Silicon Labs platform.
 
 <a name="building"></a>
@@ -52,12 +63,45 @@ Silicon Labs platform.
 
 -   Install some additional tools(likely already present for CHIP developers):
 
-#Linux `sudo apt-get install git libwebkitgtk-1.0-0 ninja-build`
+Linux
+
+    sudo apt-get install git ninja-build
 
-#Mac OS X `brew install ninja`
+Mac OS X
+
+    brew install ninja
 
 -   Supported hardware:
 
+    -   > For the latest supported hardware please refer to the
+        > [Hardware Requirements](https://github.com/SiliconLabs/matter/blob/latest/docs/silabs/general/HARDWARE_REQUIREMENTS.md)
+        > in the Silicon Labs Matter Github Repo
+
+    MG12 boards:
+
+    -   BRD4161A / SLWSTK6000B / Wireless Starter Kit / 2.4GHz@19dBm
+    -   BRD4162A / SLWSTK6000B / Wireless Starter Kit / 2.4GHz@10dBm
+    -   BRD4163A / SLWSTK6000B / Wireless Starter Kit / 2.4GHz@10dBm,
+        868MHz@19dBm
+    -   BRD4164A / SLWSTK6000B / Wireless Starter Kit / 2.4GHz@19dBm
+    -   BRD4166A / SLTB004A / Thunderboard Sense 2 / 2.4GHz@10dBm
+    -   BRD4170A / SLWSTK6000B / Multiband Wireless Starter Kit / 2.4GHz@19dBm,
+        915MHz@19dBm
+    -   BRD4304A / SLWSTK6000B / MGM12P Module / 2.4GHz@19dBm
+
+    MG21 boards: Currently not supported due to RAM limitation.
+
+    -   BRD4180A / SLWSTK6006A / Wireless Starter Kit / 2.4GHz@20dBm
+
+    MG24 boards :
+
+    -   BRD2601B / SLWSTK6000B / Wireless Starter Kit / 2.4GHz@10dBm
+    -   BRD2703A / SLWSTK6000B / Wireless Starter Kit / 2.4GHz@10dBm
+    -   BRD4186A / SLWSTK6006A / Wireless Starter Kit / 2.4GHz@10dBm
+    -   BRD4186C / SLWSTK6006A / Wireless Starter Kit / 2.4GHz@10dBm
+    -   BRD4187A / SLWSTK6006A / Wireless Starter Kit / 2.4GHz@20dBm
+    -   BRD4187C / SLWSTK6006A / Wireless Starter Kit / 2.4GHz@20dBm
+
     MG12 boards:
 
     -   BRD4161A / SLWSTK6000B / Wireless Starter Kit / 2.4GHz@19dBm