#Doesme cypress test, some write ups on tests, installation and run

##Test Cases: 1)Check the button Male/Female button selection 2) Verify the post submission and check response status, data 3) Enter Patient Data in Step-1 4) Enter Previous Dose details in Step-2, click on the Calculate button and check the Patient Summary and handled the 'I agree and don't show this again' dialog

##Regarding the spec/ test file and other test configuration:

1. The doseme-spec.js test spec is available in the following path:

   \cypress\integration\examples

2. I have written below functions in 'commands.js' file so it gives the flexibility of reusing at any / number of time \cypress\support
   cy.resetPage(), cy.patientdata(t_weight, t_height, t_age, t_serum); cy.previousdose(t_pdose, t_infusion, t_noofdose);

3)I have defined all the parameters for the page in Cypress.env.json file, its available in the root folder C:\doseme\node_modules.bin { "test_weight": "85", "test_height": "180", "test_age": "35", "test_serum": "2.5", "test_pastdose": "250", "test_infusion": "2", "test_numberofdoses": "3" }

4)The baseUrl is configured in the cypress.json file and also available in the root folder "baseUrl": "url-goes-here"

##Command to run the test file:

######Run the spec/ test file from the command prompt:

First navigate to the Cypress folder directory>> C:\doseme\node_modules.bin Then type this command cypress run --record --headed --no-exit 'cypress/integration/doseme-spec.js'

######Run the test from the test runner:

First navigate to the Cypress folder directory>> C:\doseme\node_modules.bin
Then type command and enter cypress open