Command line access to generic socket based WIFI LED Controllers
Before using wifiled, you need to tell it what ip and port to target.
(port will default to 5577 if not set)
- Environment Variables - Before using wifiled, run
export wifiled_ip= 192.168.1.123andexport wifiled_port = 5577 - CLI Flags - add
-ip 192.168.1.123and/or-port 5577
You can set multiple ips with a comma separator. For example -ip="1.1.1.1,2.2.2.2,3.3.3.3"
You can set -timeout=1 to set the timeout in seconds. This is useful if you have a lot of controllers and don't want to wait long for each command. (defaults to 5 seconds)
Then you can issue the following commands:
wifiled on - turns on LEDs to the last RGBWWW setting
wifiled off - turns off LEDs
wifiled dim 50 - dims all channels to 50/255
wifiled dim 255 0 0 - dims LEDs to Red 255/255 Green 0/255 Blue 0/255
wifiled dim 200 200 200 100 100 - dims LEDs RGB to 200/255 and Whites to 100/200
wifiled randomize - randomizes the LEDs
wifiled randomize 0-10 - sets a random color with values between 0 and 10
wifiled randomize 255 0-50 0-50 - sets red fixed and green/blue between 0 and 50
If you want to avoid getting the color white, simply add -avoidwhite and whenever the RGB are over 150 for each channel, it will turn off the blue channel.
This project expects to be checked out in your go src path.
Run go build in the root of the project.
Tested with generic WIFI LED Controllers that use the MagicHome mobile app to control.
Devices:
- XCSOURCE DC 12-24V WIFI Remote 5 Channels Controller for iOS Android RGB LED Strip LD686
- MPN : HF-LPB100-1
- LEDENET Smart Wifi LED Controller 5 Channels Control 4A4CH
- (more to come)
2014 Protocol - Sends tcp packets to port 5577
- Tasmota Firmware : https://github.com/arendst/Tasmota/wiki/MagicHome-LED-strip-controller
- ESPurna Firmware : https://github.com/xoseperez/espurna/wiki/Hardware-Magic-Home-LED-Controller
- Magichome-python : https://github.com/adamkempenich/magichome-python
- node-magichome : https://github.com/jangxx/node-magichome
Mac Homebrew:
brew install szazeski/tap/wifiled
On linux/mac you can :
wget https://github.com/szazeski/wifiled/releases/download/v0.5.0/wifiled_$(uname -s)_$(uname -m).tar.gz -O wifiled.tar.gz && tar -xf wifiled.tar.gz && cd wifiled && chmod +x wifiled && sudo cp wifiled /usr/bin/
On Windows powershell you can :
Invoke-WebRequest https://github.com/szazeski/wifiled/releases/download/v0.5.0/wifiled_Windows_x86_64.zip -outfile wifiled.zip; Expand-Archive wifiled.zip; dir wifiled; echo "if you want, in explorer move .\wifiled\wifiled.exe to a PATH directory like C:\WINDOWS folder"