v2.4

EVA 2.4 conversion kit for the BLV MGN Cube

Changelog

• nothing changed from v2.4-beta. Changelog duplicated below
• updated front and back plates to EVA 2.4
• added a special bottom plate that can hold the X endstop switch, as there was no longer room to leave it where it was
• added a mounting option that's compatible with the metal kit (and also the printed parts version, if you print a modified top-left gantry mount) - thanks to Jose Elias!
• made endstop mounts compatible with endstop switches with M2.5 holes and a hole distance between 8-9.5mm

Upgrade instructions

If you are using the EVA 2.0 conversion kit, just print the front and back plates and replace as necessary. You will need to print the cooling duct and top extruder adapter for your extruder from EVA directly.

You will have to replace the endstop mount with one of 2 options:

• print the endstop_mount (and the modified top-left gantry mount if you don't have the metal kit). In this case you have to get the base EVA bottom plate
• print the custom bottom plate if you don't have the metal kit and prefer to place the endstop below the gantry

V2.4-beta

First beta of the EVA 2.4 conversion kit for the BLV MGN Cube

Changelog

• updated front and back plates to EVA 2.4
• added a special bottom plate that can hold the X endstop switch, as there was no longer room to leave it where it was
• added a mounting option that's compatible with the metal kit (and also the printed parts version, if you print a modified top-left gantry mount) - thanks to Jose Elias!
• made endstop mounts compatible with endstop switches with M2.5 holes and a hole distance between 8-9.5mm

Upgrade instructions

If you are using the EVA 2.0 conversion kit, just print the front and back plates and replace as necessary. You will need to print the cooling duct and top extruder adapter for your extruder from EVA directly.

You will have to replace the endstop mount with one of 2 options:

• print the endstop_mount (and the modified top-left gantry mount if you don't have the metal kit). In this case you have to get the base EVA bottom plate
• print the custom bottom plate if you don't have the metal kit and prefer to place the endstop below the gantry

v2.0

EVA 2.0 adaptation for BLV MGN Cube

More info here https://contrib.eva-3d.page/printer-compatibility/blv-mgn-cube/