This program receives NRSC-5 digital radio stations using an RTL-SDR dongle. It offers a command-line interface as well as an API upon which other applications can be built. Before using it, you'll first need to compile the program using the build instructions below.
sudo apt install git build-essential cmake autoconf libtool libao-dev libfftw3-dev librtlsdr-dev
git clone https://github.com/theori-io/nrsc5.git
cd nrsc5
mkdir build
cd build
cmake [options] ..
make
sudo make install
sudo ldconfig
Available build options:
-DUSE_NEON=ON Use NEON instructions. [ARM, default=OFF]
-DUSE_SSE=ON Use SSSE3 instructions. [x86, default=OFF]
-DUSE_FAAD2=ON AAC decoding with FAAD2. [default=ON]
-DLIBRARY_DEBUG_LEVEL=1 Debug logging level for libnrsc5. [default=5]
-DBUILD_DOC=ON Generate html API documentation [default=OFF]
You can test the program using the included sample capture:
xz -d < ../support/sample.xz | src/nrsc5 -r - 0
Follow the Ubuntu instructions above, but replace the first command with the following:
sudo dnf install make patch cmake autoconf libtool libao-devel fftw-devel rtl-sdr-devel libusb-devel
Follow the Ubuntu instructions above, but replace the first command with the following:
zypper install -t pattern devel_C_C++
zypper install git cmake libao-devel fftw3-devel rtl-sdr-devel libusb-1_0-devel
Building on macOS using Homebrew
curl https://raw.githubusercontent.com/theori-io/nrsc5/master/nrsc5.rb > /tmp/nrsc5.rb
brew install --HEAD -s /tmp/nrsc5.rb
To build the program for Windows, you can either use MSYS2 on Windows, or else use a cross-compiler on an Ubuntu, Debian or macOS machine. Scripts are provided to help with both cases.
Install MSYS2. Open a terminal using the "MSYS2 MinGW 64-bit" shortcut. (Or use the 32-bit shortcut if you prefer a 32-bit build.)
pacman -Syu
If this is the first time running pacman, you will be told to close the terminal window. After doing so, reopen using the same shortcut as before.
pacman -Su
pacman -S git
git clone https://github.com/theori-io/nrsc5.git
nrsc5/support/msys2-build
You can test your installation using the included sample file:
cd ~/nrsc5/support
xz -d sample.xz
nrsc5.exe -r sample 0
If the sample file does not work, make sure you followed all of the instructions. If it still doesn't work, file an issue with the error message. Please put "[Windows]" in the title of the issue.
Once everything is built, you can run nrsc5 independently of MSYS2. Copy the following files from your MSYS2 mingw64 (or mingw32) directory (e.g. C:\msys64\mingw64\bin):
- libnrsc5.dll
- nrsc5.exe
sudo apt install mingw-w64
support/win-cross-compile 64
Replace 64 with 32 if you want a 32-bit build. Once the build is complete, copy *.dll and nrsc5.exe from the build-win64/bin (or build-win32/bin) folder to your Windows machine.
brew install mingw-w64
support/win-cross-compile 64
Replace 64 with 32 if you want a 32-bit build. Once the build is complete, copy *.dll and nrsc5.exe from the build-win64/bin (or build-win32/bin) folder to your Windows machine.
frequency center frequency in MHz or Hz
(do not provide frequency when reading from file)
program audio program to decode
(0, 1, 2, or 3)
-g gain gain
(example: 49.6)
(automatic gain selection if not specified)
-d device-index rtl-sdr device
-p ppm-error rtl-sdr ppm error
-H rtltcp-host rtl_tcp host with optional port
(example: localhost:1234)
-r iq-input read IQ samples from input file
-w iq-output write IQ samples to output file
-o audio-output write audio to output file
-t audio-type type of audio output (wav or raw)
(default is wav. used in conjunction with -o)
-q disable log output
-l log-level set log level
(1 = DEBUG, 2 = INFO, 3 = WARN)
-v print the version number and exit
--am receive AM signals
(default is FM)
-T enable bias-T
-D direct-sampling-mode enable direct sampling
(1 = I-ADC input, 2 = Q-ADC input)
--dump-aas-files dir-name dump AAS files
(WARNING: insecure)
--dump-hdc file-name dump HDC packets
Tune to 107.1 MHz and play audio program 0:
nrsc5 107.1 0
Tune to 107.1 MHz and play audio program 0. Manually set gain to 49.0 dB and save raw IQ samples to a file:
nrsc5 -g 49.0 -w samples1071 107.1 0
Read raw IQ samples from a file and play back audio program 0:
nrsc5 -r samples1071 0
Tune to 90.5 MHz and convert audio program 0 to WAV format for playback in an external media player:
nrsc5 -o - 90.5 0 | mplayer -
To switch between audio programs at runtime, press 0 through 7.
To quit, press Q.
If you get errors trying to access your RTL-SDR device, then you may need to use Zadig to change the USB driver. Once you download and run Zadig, select your RTL-SDR device, ensure the driver is set to WinUSB, and then click "Replace Driver". If your device is not listed, enable "Options" -> "List All Devices".