Skip to content
New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

Sign up for GitHub

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

Jump to bottom

Syncing #1

Merged
merged 215 commits into from
Feb 13, 2025
Merged

Syncing #1

merged 215 commits into from
Feb 13, 2025

Conversation

Imlbrown
Copy link
Owner

  • The mod, firmware configuration or slicer profile is in the correct category
    folder. Printable mods go to printer_mods/, firmware configurations
    go to firmware_configurations/, slicer profiles go to slicer_profiles/.
    Create a subfolder with your name, and place the mods in a subfolder with
    a descriptive name within that folder, e.g.: /printer_mods/FHeilmann/flux_capacitor
  • Folders names MUST NOT contain spaces. If possible, make sure file names also
    do not contain any spaces.
  • For each mod, add a small README.md file to its folder with a short description
    of what the mod accomplishes. This readme can be used to add pictures, give assembly
    instructions or specify a bill of materials if the mod requires additional hardware.
  • The PR modifies the top-level README.md of the category folder adding the
    contribution to the table. Read the top part of the file for instructions on how
    to do this. Please preserve the alphabetical ordering while adding new rows. Make sure
    to fill out the compatibility matrix to indicate which versions of the Voron printer
    the submission is compatible with.
  • The mod/configuration/profile has been tested by the person submitting the mod
    and/or other Voron users. Make sure to add information about how the mod was tested below.
  • The mod is not merely a slight modification of an official Voron part, configuration
    or profile (i.e. an official Voron part with a few mm added or removed or a slicer profile
    which only modifies a few values). (When in doubt, contact one of the admins in the
    Voron discord before submitting the PR)
  • Submitted STLs are printable without support. (If the mod does not meet this criterion
    join the Voron discord and ask the other users for advice on how to modify the mod such
    that it does not require supports)
  • Submitted STL files are not corrupt. (This can be tested by opening the STL in PrusaSlicer
    and checking if mesh errors are reported.)
  • Submitted STL files are oriented and scaled properly for printing.
  • Submission includes a CAD file in the form of a .STEP or .SCAD file
  • Submitted firmware configs or slicer profiles contain no sensitive data (e.g. API keys).

Which mods/configurations/profiles are added by this PR?

How was it tested?

Any background context you want to provide?

Screenshots (if appropriate)

Further notes

LoganFraser and others added 30 commits April 26, 2022 13:08
@LoganFraser
Combo inlet (#708)
ad9dcb3 
* Add files via upload

* Update README.md

* Update README.md

* Update README.md

* Update README.md

* Update README.md

* Update README.md

* Update README.md

* Add files via upload
@kevinakasam
VEFACH - Voron Exhaust Filter Activated Coal + Hepa (#706)
4142122 
* Update README.md

* Add files via upload

* Create Readme.md

* Create Readme.md

* Add files via upload

* Add files via upload

* Delete 0_filterdummy_dont_print.stl

* Delete 1_coal_for_infill_mesh.stl

* Delete 1_coal_with_mesh.stl

* Delete 1_hepa.stl

* Delete 1_lid.stl

* Rename stlcad.md to Readme.md

* VEFACH - Voron Exhaust Filter Activated Coal + Hepa

* Update README.md

* VEFACH - Voron Exhaust Filter Activated Coal + Hepa

* VEFACH - Voron Exhaust Filter Activated Coal + Hepa
@zzp8202
Pull-out_electrical_store for Voron 2.4 (#690)
2f8760c 
* Add files via upload

* Delete printer_mods/ZZP8202/Pull-out_electrical_store directory

* Pull-out_electrical_store

* Update README.md

* Update README.md

* Update README.md

* Update README.md

* Update README.md

* Update README.md

* Update README.md

* Update README.md

* Update README.md

* Update README.md

* Update README.md

* Update README.md

* Update README.md

* Update README.md

* Update README.md

* Update README.md

* Update README.md

* Update README.md

* Update README.md

* update

* Delete Guide_rail_C-SR36Y18.stp

* Update README.md

* Update README.md

* Update README.md

* Update README.md

* Update README.md

* update 3d

* Create README_CN.md

* Update README.md

* Update README.md

* Update README_CN.md

* Update README_CN.md

* Update README_CN.md

* Update README_CN.md

* Update README_CN.md

* Update README_CN.md

* Update README_CN.md

* Update README.md

* Update README_CN.md

* Update README_CN.md

* update 3D

* update drawing

* upload photo

* upload photo

* Update README.md

* Update README_CN.md

* Update README_CN.md

* Update README.md

* Update README.md

* Update README_CN.md

* Update README_CN.md

* Update README.md

* change name

* Create fan_balnk_X2.STL

* Delete fan_balnk_X2.STL

* Create Fan_decorative_panel_X2.STL

* Update README.md

* Update README_CN.md

* Update README_CN.md

* Update README.md

* Update README.md

* Update README_CN.md

* Delete Voron_V2.4_Pull-out_electrical_store.SLDASM

* Create Voron_V2.4_Pull-out_electrical_store.STEP

* Update README_CN.md

* Update README_CN.md

* Update README_CN.md

* Update README.md

* Create STEEL_CORNER_LBSB6-2020_X8.pdf

* Delete STEEL CORNER_LBSB6-2020_X8.pdf
@jaysuk
4.3 Fly Screen Mount (#705)
0461850 
* 4.3 Fly Screen Mount

* removed a couple of files and updated STL orientation
@wile-e1
SB+CW1+PCB Cover Added (#663)
64260d6 
* SB+CW1+PCB Cover Added

Added a low-poly style cover for users that are still rocking the Clockwork1 and PCB with Stealthburner.  This should be compatible with ERCF and Hartk style PCBs.

* Update README.md

* Update README.md

* Fixed empty STP

Fixed the STP file which was empty for some reason and hopefully corrected the merge issues with the main readme.md

* Fixed formatting on mods README.md

* Update README.md
@cbc02009
Abandoned mods (#700)
339b14c 
* fix order in readme.md

* move purge bucket mod to abandoned mods

* update readme.md for abandoned mods.

* Fix broken link to abandoned mod.

* fix broken link to mod *for real this time*

* Fix typo in readme
@KiloQubit
Add part numbers for inlet parts. (#710)
a109b9a
@LoganFraser
Horseshoe spool holder (#712)
1ac2fb0 
* Add files via upload

* Update README.md

* Update README.md

* Update readme.md

* Update readme.md

* Update readme.md

* Add files via upload

* Update readme.md

* Add files via upload
@nhchiu
Added bed holder for kirigami bed (#713)
d515bf0
@VinnyCordeiro
Updated PCB, solve need for inline resistor for impedance matching (#716
8f1d3f9 
)

* Create README.md

* Create README.md

* Update README.md

* Added KiCad project files

* Create README.md

* Added production files

* Update README.md

Added note on mixing RGB and RGBW LEDs.

* Update README.md

typo

* Create README.md

* Update README.md

Added VinnyCordeiro's RGB LED grid for Stealthburner

* Add files via upload

Animated GIF of the board working

* Update README.md

* Update README.md

* Update README.md

Added the KiCad version that was used to design the PCB

* Removed non-necessary components

Removed both the input resistor and the filtering capacitor, as they are not strictly necessary for this application.

* Delete bom.csv

* Delete cpl.csv

* Delete RGBW_LED_circular_panel_for_Stealthburner.zip

* Updated production files

* Update README.md
@LoganFraser
Update nozzle_scrub.cfg (#717)
7ee610f
@Minsekt
add rear umbilical + y endstop relocation mod (#704)
f377353 
* add rear umbilical mod

* Update README.md

* Update README.md

* update folder structure

* Create Rear_Umbilical.step

* Update README.md

* Update README.md

* Update README.md

* Update README.md

* Update README.md

* Update README.md

Co-authored-by: Vesh <71715518+DSG1307@users.noreply.github.com>
@skohls
V2.4r2 Z-Drive Motor Tensioner Mod base plates (#707)
38d475b 
* 2.4r2 version

Modded the original design for the new r2 feet and cutouts of the baseplate.

* 2.4r2 version

Modded the original design for the new r2 feet and cutouts of the baseplate.
Only the baseplate has changed.

* Moved the whole mod to the "abandoned_mods" folder.

* Update README.md

* Update [a]_2.4_base_plate_b_mod_x2.stl

* added the change log section

* Fixed Link

* Fixed Link
@chri-kai-in
AngryCAM USB V2.0 Update (#718)
ef0aecf 
* AngryCAM USB V2 Update

* corrected Readme.md, due to missing content

* removed redundant image and updated ReadMe.md

* updated ReadMe.md with more details on V2 and re-added V1 pictures for history reasons

* remove typos from ReadMe.md and updated/added some images

* Final changes to ReadMe.md

* bugfix #1: corrected length of used M3 SHCS screw in ReadMe.md to M3x20

* bugfix 1: corrected length of used M3 SHCS screw in ReadMe.md to M3x20
@falo2k
PCB/CAN Mount Adaptor (#722)
0db2e68
@Minsekt
update readme.md (#724)
0229a0f 
* add rear umbilical mod

* Update README.md

* Update README.md

* update folder structure

* Create Rear_Umbilical.step

* Update README.md

* Update README.md

* Update README.md

* Update README.md

* Update README.md

* Update README.md

* Update README.md

initial commit was wrong (1.8) mod is only confirmed by me to work with 2.4

Co-authored-by: Vesh <71715518+DSG1307@users.noreply.github.com>
@cbc02009
fix alphabetical ordering issue. (#731)
191eca4
@RockNLol
RockNRoll-Mod (#615)
203c5a6 
* Create README.md

* Update README.md

Added M3x20 to BOM

* Update README.md

* Add files via upload

uploaded STLs

* add CAD data and folder structure

* Update README.md

* Update README.md

* Update README.md

* uploaded pictures

* Create support_03.jpg

* Update README.md

* Update README.md

* Update README.md

* Update README.md

* renamed STEP and STLs

* renamed STLs

* changed hole design of brace screw hole

Thanks barthini for the idea!

* added images

* Update README.md

* changed M3 screw length and renamed project

* added assembly instructions and pictures

* Update assembly_base_plates_01.jpg

* Update README.md

* removed image

* added mod to modlist

* Update README.md

* Update README.md

* added supports and compatibility to 2.4r2

added base plates with forks for the rockers compatible with the new r2 feet. Also added in-model-supports to support the holes over the overhang for the rear panel. As requested by user ✪Runanaツ#3906 I added a version for 6mm thick panels (including foam tape).

* Updated the README and pictures to encorporate the recent changes.

* Update README.md

* Add additional support to shorten bridging

also removed supports entirely in CAD data

* Delete Thumbs.db

removed Thumbs.db - thanks Windows
@Backenfutter
Create README.md (#709)
44dacde 
* Create README.md

* Create README.md

* Add files via upload

* Update README.md

* Delete README.md

* Create README.md

* Add files via upload

* Create README.md

* Add files via upload

* Update README.md

* Update README.md

* Update README.md

Order correction
@Mac10goesBRRRT
Addition of my Mod PiTFT Mount (#720)
f2caa29 
* Added PiTFT Mount

Added PiTFT Mount

* Update readme.md

* Create STL

* Add files via upload

* Delete STL

* Create readme.md

* Added STL files

* Delete [a]_display_mount_x2.stl

* Delete display_middle_skirt.stl

* Delete pitft70_housing_front.stl

* Delete pitft70_housing_rear.stl

* Create placeholder.md

* Added Some Pictures

* Update readme.md

* Add files via upload

* Update readme.md

* Update readme.md

* Delete printer_mods/Mac10goesBRRRT/BTT_PiTFT/Pictures directory

* Add files via upload

* Update readme.md

* Update readme.md

* Update readme.md

* Update readme.md

* Update readme.md

* Update readme.md

* Update readme.md

* Update readme.md

* Delete Display_Far.jpg

* Delete Display_Close.jpg

* Add files via upload

* Update readme.md

* Added Pictures and updated Instructions

* Update readme.md

* Added Printing Instructions

* Add files via upload

* Update readme.md

* Update readme.md

* Added my Entry in the List

* Delete printer_mods/Mac10goesBRRRT/BTT_PiTFT/SLT directory

* Add files via upload
@reapola
MKS CANable DIN Mount (#728)
d839c6f 
* canablepro

* Delete canable_pro_cad.JPG

* Create canable_pro_cad.jpg
@stvptrsn
Added step files where missing, remove files that were added to Tride…
921360d 
…ntR1 and added a few more mods frequesntly requested. (#732)
@chri-kai-in
restarted pull request for flush and overlapping profile covers (#733)
3b15166
@AaronHerrick
Adding RevoVoron Support (#735)
3796f23 
* Revo Voron Added

by request, adding Revo Voron

* Fixed stl error on revo voron front

* added REVO_VORON and removed slice announcement

Its been a year, I don't need to keep the slice announcement in there
@elcrni
Trident Internal Filament Spool Holder (#719)
e238ec3 
* Create elcrni

* Delete elcrni

* Create sdfsdfs

* Update and rename sdfsdfs to Voron spool holder mods

* V2.4 Trident Spool Holders

* Delete V2.4-Trident-Spool-Holders

* Delete Voron spool holder mods

* V2.4-Trident-Spool-Holders

* V2.4-Trident-Spool-Holders

* Updates

* Delete printer_mods/elcrni/V2.4-Trident-Spool-Holders directory

* Create 1

* Create 2

* V2.4-Trident-Spool-Holders

* File Updates

* Updates

* Update README.md

* Update README.md

* Update README.md

* Update README.md

* Update README.md

* Update README.md

* Update README.md

* Delete BB__spool_arm_left.3mf

* Delete BB__spool_arm_right.3mf

* Delete BB__spool_core.3mf

* Add files via upload

* Delete BB__spool_arm_left.stl

* Delete BB__spool_arm_right.stl

* Fixed STL orientation

* Update README.md

* Update README.md

* Create Readme

* Create README

* Added new STLs

Added modified holder arms without panel pins so the holder can be mounted anywhere on the frame

* Update README.md

* Create README.md

* Update README.md

* Update README.md

* Create README.md

* Initial Release STL Upload

* Create README.md

* Add files via upload

* Update README.md

* Add files via upload

* Update README.md

* Update README.md

* Update README.md

* Update README.md

* Create README.md

* Add files via upload

* Update README.md

* Update README.md

* Add files via upload

* Update README.md

* Update README.md

* Update README.md

* Update README.md

* Update README.md

* Update README.md

* Update README.md

* Update README.md

* Update README.md

* Update README.md
@ameyp
Add DIN rail bracket for OrangePi 3 LTS (#729)
55263c6 
* Add DIN rail mount for OrangePi 3 LTS

* Fix orientation of parts.
@falo2k
Lgx lite side can board mount (#737)
aac299c 
* LGX Lite Side Mount

* Readme tweaks
@jotpowers
Door update (#739)
56b234f 
* Simplify to a single fusion file.
Update all the DXF to new v2.4R2 dimensions (1mm smaller across both dimensions)
Update README with details
Add new screenshot to show how to save DXF files from Fusion

* fix table formatting

* fix CAD link
@clee
Add Monster8 heatsert mount (#746)
1283f5f 
- Can print 2x on V0 bed with no issue
- Uses heatsets
- Fits Monster8 V1 and V2
@VinnyCordeiro
Updated README.md file (#744)
720e266 
* Create README.md

* Create README.md

* Update README.md

* Added KiCad project files

* Create README.md

* Added production files

* Update README.md

Added note on mixing RGB and RGBW LEDs.

* Update README.md

typo

* Create README.md

* Update README.md

Added VinnyCordeiro's RGB LED grid for Stealthburner

* Add files via upload

Animated GIF of the board working

* Update README.md

* Update README.md

* Update README.md

Added the KiCad version that was used to design the PCB

* Removed non-necessary components

Removed both the input resistor and the filtering capacitor, as they are not strictly necessary for this application.

* Delete bom.csv

* Delete cpl.csv

* Delete RGBW_LED_circular_panel_for_Stealthburner.zip

* Updated production files

* Update README.md

* Update README.md

Added information about how to use the Rainbow Barf on Klipper using the main repo, and how to mix it with the nozzle RGBW LEDs.

* Update README.md

Added warning concerning JLCPCB not providing the WS2812B-2020 LEDs anymore.

* Update README.md

Added an entry on the 'Updates' section.
FHeilmann and others added 29 commits January 21, 2024 21:17
@FHeilmann
Fix mods without printer compatibility
fb8188a
@Voron-GitHub-Bot
Re-generate VoronUsers README with latest changes
b157f50 
[skip ci]
@ppak10
Flush mount for hdmi and usb c by ppak10 (#1031)
9b38947 
* Flush mount for hdmi and usb c (#1)

* Adds CAD and STL files for flush mount mod.

* Renames mod folder name.

* Updates dimensions of flush mount opening.

* Adds photos and updates `README.md`.

* Reduces `.stl` size, adds `0.4 mm` chamfer, and notes installation.

* Adds image for BATIGE Mount.

* Removes possibly copyright image and updates `metadata.yml`.

* Updates `README.md` to no longer use `html`.

* Adds `All_Sizes_2` in `README.md`.

* Corrects `./Images/250_300_350_Render.png`.
@Voron-GitHub-Bot
Re-generate VoronUsers README with latest changes
70e4d6e 
[skip ci]
@Dr-Info @newphreak
5160T Plus Mounts, LRS DIN Mount Offset and Lever Connector Mount Sid…
382c24e 
…e Fan Support by Dr-Info (#1033)

* Create README.md

* Create mounts_btt_5160t_plus.step

* Add files via upload

* Create 30mm_fan_shroud_5160T_plus_x2.stl

* Add files via upload

* Create 1515_bracket_5160T_plus.stl

* Add files via upload

* Create 5160T_plus_mounts.jpg

* Add files via upload

* Create README.md

* Create lrs_offset.jpg

* Add files via upload

* Create LRS_DIN_Mount_Offset.step

* Add files via upload

* Create lrs_offset_left.stl

* Add files via upload

* Create README.md

* Update README.md

* Create lever_connector_side_fan_support.jpg

* Add files via upload

* Create lever_connector_mount_side_fan_support.step

* Add files via upload

* Create ulc3_fan_mount_side_fan_support.stl

* Add files via upload

* Create .metadata.yml

* Create .metadata.yml

* Create .metadata.yml

* Update README.md

* Update README.md

* Add files via upload

* Update .metadata.yml

* Update README.md

* Update .metadata.yml

* Update .metadata.yml

* Update .metadata.yml

* Update .metadata.yml

* Update README.md

* Update README.md

* Update README.md

* Update .metadata.yml

---------

Co-authored-by: newphreak <nilssen.jon@gmail.com>
@Voron-GitHub-Bot
Re-generate VoronUsers README with latest changes
6b61314 
[skip ci]
@FHeilmann
Mod Adoption: Dr-Info adopts V2.4 Z drive tensioner from edwardyeeks (#…
47bc8e4 
…1034)
@Voron-GitHub-Bot
Re-generate VoronUsers README with latest changes
c6222ef 
[skip ci]
@MapleLeafMakers
Add CAD Files for most xbst mods (#1036)
a04cf18 
* Add CAD Files for most xbst mods
* whitespace cleanup
* fix cad listing in .metadata.yml
@Voron-GitHub-Bot
Re-generate VoronUsers README with latest changes
5f87c50 
[skip ci]
@techprolet @newphreak
2020 aplic cam mount by techprolet (#1039)
4f8149b 
* 2020 aplic cam mount

* renamed metadata.yml, added shortened version, removed stl import

* fixed PR issues

* corrected typos/quantities in BOM

* fixed typose, added M3 spacer length

---------

Co-authored-by: newphreak <nilssen.jon@gmail.com>
@Voron-GitHub-Bot
Re-generate VoronUsers README with latest changes
9b04f30 
[skip ci]
@MapleLeafMakers @bryanboettcher
add CAD for khay mods (#1037)
a029b46 
Co-authored-by: Bryan Boettcher <bryan.boettcher@gmail.com>
@Voron-GitHub-Bot
Re-generate VoronUsers README with latest changes
52c0c5f 
[skip ci]
@Reemuson
add switchwire cyd screen case files by Reemuson (#1041)
c59a381 
* feat: add switchwire cyd screen case files

* docs: added gif to README

* fix: change orientation for best print

* fix: add bridging to counterbored holes
@Voron-GitHub-Bot
Re-generate VoronUsers README with latest changes
afdc36a 
[skip ci]
@ppak10
Enclosed Z Chain Guide by ppak10 (#1045)
5398b24 
* Flush mount for hdmi and usb c (#1)

* Adds CAD and STL files for flush mount mod.

* Renames mod folder name.

* Updates dimensions of flush mount opening.

* Adds photos and updates `README.md`.

* Reduces `.stl` size, adds `0.4 mm` chamfer, and notes installation.

* Adds image for BATIGE Mount.

* Removes possibly copyright image and updates `metadata.yml`.

* Updates `README.md` to no longer use `html`.

* Adds `All_Sizes_2` in `README.md`.

* Corrects `./Images/250_300_350_Render.png`.

* Adds CAD, STL, and Images.

* Adds images and description to files.

* Updates `.metadata.yml` with correct `.STL` file links and fixes stls.
@Voron-GitHub-Bot
Re-generate VoronUsers README with latest changes
50f3c73 
[skip ci]
@SGr33n
300mm-x-extruder by SGr33n (#1047)
2ef5d44 
* First commit

* Update metadata.yml & added readme

* Upload STL and CAD. Update metadata.yml

* Update STLs orientation

* Removed spaces in namefiles

* Update README.md

* Added images and completed the README.md

* Add alt text to images

* Update README.md

* Fixed image path typo in metadata.yml. Removed f3z file, lighten the step file removing unecessary components.

* Fix logo inset on left endcap

* Add gallery images to metadata.yml file

* Change name Extruder to Extrusion

* left STL to Binary

* Create a new directory

* Removed old directory
@Voron-GitHub-Bot
Re-generate VoronUsers README with latest changes
a7da5eb 
[skip ci]
@aeresov
Ballpoint pen spring DIN clips assortment by aeresov (#1048)
4c8c385 
* initial

* fixed linting errors

* fixed image links in metadata
@Voron-GitHub-Bot
Re-generate VoronUsers README with latest changes
d9ea3ba 
[skip ci]
@Rikers-Beard
Rs 50 5 bracket by Rikers-Beard (#1050)
dd7d94b 
* RS-50-5 Bracket

This is my first attempt at submitting a mod, sorry if I messed anything up!

* WAGO_221-415_mount_3x5_M3_fasteners

And here's the second one I'd like to submit.

* removed separate mod

removed another mod I want to submit.

* Changes

Changed discord_username and added VT compatibility

* Corrected?

I removed an empty line in the description that was used to space the sentences, maybe that fixed it?

* Punctuation correction

Forgot to add a space after a period in description, corrected.

* Shortened Description

shortened description per advice.
@Voron-GitHub-Bot
Re-generate VoronUsers README with latest changes
dd2c299 
[skip ci]
@zzp8202
Double_GEAR_ratio_Z by zzp8202 (#1052)
281bdc5 
* Publish ‘Double_GEAR_ratio_Z’

* add photo

* Add Assemble Instructions，Resize photo

* Update Z_Belt_Clamp_Upper_x8.STL

* edit read me and YAML file

* fix Voron LOGO for stl， change description in readme

* Update README.md
@Voron-GitHub-Bot
Re-generate VoronUsers README with latest changes
b16d8dc 
[skip ci]
@Itzo1978
PEI Stop by Itzo1978 (#1055)
e9ba566
@Voron-GitHub-Bot
Re-generate VoronUsers README with latest changes
ec3ebba 
[skip ci]
@schiele
Update orphaned_mods/edwardyeeks/Decontaminator_Purge_Bucket_&_Nozzle…
d12de43 
…_Scrubber/Macros/ by schiele (#1057)

* use native Jinja variable _bucket_pos

The previous implementation of dynamically changing bucket_pos on each
run had an extremely confusing semantic of changing the variable early
in the execution of the macro but see the effect only on the next run of
the macro.  This led to the situation that the first bucket position
after the machine started was never selected randomly, only all later
ones.  While this for sure is not a major problem of the implementation
it is extremely confusing and makes extending the macro unnecessarily
complicated.

See the confusion this created on my side at
https://klipper.discourse.group/t/conditional-changing-of-a-variable-inside-a-macro/19161

By using the native Jinja variable _bucket_pos instead, we can make the
change effective immediately, making the macro behave how you would
intuitively expect.

* variable_bucket_park: select bucket to park nozzle after cleaning

The previous implementation always parked the nozzle over the left
bucket after cleaning.  While this makes sense in most cases it is
problematic when you happen to have something installed over the left
bucket, like the Klicky Probe.  If parking the nozzle over the Klicky
Probe there is a certain risk to pull it out of the docking station by
accident with the move command following the cleaning procedure.  When
we park the nozzle over the right bucket we can mitigate that risk.

The default value for variable_bucket_park is still to park over the
left bucket as in the original implementation.

* variable_bucket_purge: select bucket for purging

In the original implementation, the bucket for purging was selected
randomly.  Since I wanted to park the nozzle always over the right
bucket to avoid conflicts with the Klicky Probe and as such always
oozing into that (on my 350 build) smaller right bucket I thought that
it might be useful to compensate for this by always purging to the
larger left bucket.

Now you can select the bucket you want to do the purging.  With the
default setting of -1 it will still randomly choose the bucket as
before.
@Imlbrown Imlbrown merged commit 34a1cdb into Imlbrown:master Feb 13, 2025
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
Reviewers
No reviews
Assignees
No one assigned
Labels
None yet
Projects
None yet
Milestone
No milestone
Development

Successfully merging this pull request may close these issues.